Turbulence in coastal fronts near the mouths of Block Island and Long Island Sounds

Measurements of turbulence were performed in four frontal locations near the mouths of Block Island Sound (BIS) and Long Island Sound (LIS). These measurements extend from the offshore front associated with BIS and Mid-Atlantic Bight Shelf water, to the onshore fronts near the Montauk Point (MK) headland, and the Connecticut River plume front. The latter feature is closely associated with the major fresh water input to LIS. Turbulent kinetic energy (TKE) dissipation rate, ε, was obtained using shear probes mounted on an autonomous underwater vehicle. Offshore, the BIS estuarine outflow front showed, during spring season and ebb tide, maximum TKE dissipation rate, ε, estimates of order 10^− 5 W/kg, with background values of order 10^− 6 to 10^− 9 W/kg. Edwards et al. [Edwards, C.A., Fake, T.A., and Bogden, P.S., 2004a. Spring–summer frontogenesis at the mouth of Block Island Sound: 1. A numerical investigation into tidal and buoyancy-forced motion. Journal of Geophysical Research 109 (C12021), doi:10.1029/2003JC002132.] model this front as the boundary of a tidally driven, baroclinically adjusted BIS flow around the MK headland eddy. At the entrance to BIS, near MK, two additional fronts are observed, one of which was over sand waves. For the headland site front east of MK, without sand waves, during ebb tide, ε estimates of 10^− 5 to 10^− 6 W/kg were observed. The model shows that this front is at the northern end of an anti-cyclonic headland eddy, and within a region of strong tidal mixing. For the headland site front further northeast over sand waves, maximum ε estimates were of order 10^− 4 W/kg within a background of order 10^− 7–10^− 6 W/kg. From the model, this front is at the northeastern edge of the anti-cyclonic headland eddy and within the tidal mixing zone. For the Connecticut River plume front, a surface trapped plume, during ebb tide, maximum ε estimates of 10^− 5 W/kg were obtained, within a background of 10^− 6 to 10^− 8 W/kg. Of all four fronts, the river plume front has the largest finescale mean-square shear, S² ~ 0.15 s^− 2. All of the frontal locations had local values of the buoyancy Reynolds number indicating strong isotropic turbulence at the dissipation scales. Local values of the Froude number indicated shear instability in all of the fronts.     

The effectiveness and costs of speed reductions on emissions from international shipping

Greenhouse gas emissions from international shipping are an increasing concern. The paper evaluates whether vessel speed reduction can be a potentially cost-effective CO₂ mitigation option for ships calling on US ports. By applying a profit-maximizing equation to estimate route-specific, economically-efficient speeds, we explore policy impacts of a fuel tax and a speed reduction mandate on CO₂ emissions. The profit-maximizing function incorporates opportunity costs associated with speed reduction that go unobserved in more traditional marginal abatement cost analyses. We find that a fuel tax of about $150/ton fuel will lead to average speed-related CO₂ reductions of about 20–30%. Moreover, a speed reduction mandate targeted to achieve 20% CO₂ reduction in the container fleet costs between $30 and $200 per ton CO₂ abated, depending on how the fleet responds to a speed reduction mandate.     

Improving maritime English competence as the cornerstone of safety at sea: a focus on teaching practices to improve maritime communication

The International Maritime Industry (IMI) is a global web of shipping, connecting all Continents and bringing together mariners from a multitude of national, ethnic and linguistic backgrounds. Wherever humans interact, they communicate in some form or another and the ability to communicate competently is the cornerstone of safety at sea. This paper identifies the growth of English as the lingua franca of the sea, as a framework for the later discussion on current teaching practices. We consider that Maritime English (ME) fits into the category of a special-purpose form of English, in that it has generated, modified or adopted from other languages many terms and phrases that are only used in the IMI. This paper considers safety-to-practice as a factor in curriculum design, teaching and assessment as the basis for ME competence. Further, we propose opportunities to move industry focus forward, through collaboration with stakeholders and discussion about teaching practices. This paper identifies a gap in maritime teaching practices. This paper further explores the use of authentic teaching as a way forward to improve maritime communication.     

From suspended particles to strata: The fate of terrestrial substances in the Gaoping (Kaoping) submarine canyon

The river–sea system consisting of the Gaoping (new spelling according to the latest government's directive, formerly spelled Kaoping) River (KPR), shelf, and Submarine Canyon (KPRSC) located off southern Taiwan is an ideal natural laboratory to study the source, pathway, transport, and fate of terrestrial substances. In 2004 during the flood season of the KPR, a system-wide comprehensive field experiment was conducted to investigate particle dynamics from a source-to-sink perspective in the KPRSC with the emphasis on the effect of particle size on the transport, settling, and sedimentation along the pathway. This paper reports the findings from (1) two sediment trap moorings each configured with a Technicap PPS 3/3 sediment trap, and an acoustic current meter (Aquadopp); (2) concurrent hydrographic profiling and water sampling was conducted over 8 h next to the sediment trap moorings; and (3) box-coring in the head region of the submarine canyon near the mooring sites. Particle samples from sediment traps were analyzed for mass fluxes, grain-size composition, total organic carbon (TOC) and nitrogen (TN), organic matter (OM), carbonate, biogenic opal, polycyclic aromatic hydrocarbon (PAH), lithogenic silica and aluminum, and foraminiferal abundance. Samples from box cores were analyzed for grain-size distribution, TOC, particulate organic matter (POM), carbonate, biogenic opal, water content, and ²¹⁰Pb_ex. Water samples were filtered through 500, 250, 63, 10 µm sieves and 0.4 µm filter for the suspended sediment concentration of different size-classes.Results show that the river and shelf do not supply all the suspended particles near the canyon floor. The estimated mass flux near the canyon floor exceeds 800 g/m²/day, whose values are 2–7 times higher than those at the upper rim of the canyon. Most of the suspended particles in the canyon are fine-grained (finer than medium silt) lithogenic sediments whose percentages are 90.2% at the upper rim and 93.6% in the deeper part of the canyon.As suspended particles settle through the canyon, their size-composition shows a downward fining trend. The average percentage of clay-to-fine-silt particles (0.4–10 µm) in the water samples increases from 22.7% above the upper rim of the canyon to 56.0% near the bottom of the canyon. Conversely, the average percentage of the sand-sized (> 63 µm) suspended particles decreases downward from 32.0% above the canyon to 12.0% in the deeper part of the canyon. Correspondingly, the substrate of the canyon is composed largely of hemipelagic lithogenic mud. Parallel to this downward fining trend is the downward decrease of concentrations of suspended nonlithogenic substances such as TOC and PAH, despite of their affinity to fine-grained particles.On the surface of the canyon, down-core variables (grain size, ²¹⁰Pb_ex activity, TOC, water content) near the head region of the canyon show post-depositional disturbances such as hyperpycnite and turbiditic deposits. These deposits point to the occurrences of erosion and deposition related to high-density flows such as turbidity currents, which might be an important process in submarine canyon sedimentation.     

New appraisal values of travel time saving and reliability in Great Britain

Transportation - This paper provides an overview of the study ‘Provision of market research for value of time savings and reliability’ undertaken by the Arup/ITS Leeds/Accent consortium...     

Using the Ecopath with Ecosim Modeling Approach to Understand the Effects of Watershed-based Management Actions in Coastal Ecosystems

Resource managers are often tasked with identifying and assessing the potential impacts of management actions on the biotic communities under their care. When the management activities directly influence a single species of interest, managers can turn to a variety of models to aid in their understanding of potential changes to that population. However, as ecosystem-based management becomes more widely accepted, managers will have to understand how proposed actions will impact entire biotic communities, through both direct and indirect mechanisms. Thus, there is a need for ecosystem models that account for both trophic and non-trophic interactions, and that can be relatively easily used to assess a variety of management scenarios. We reviewed the available literature regarding incorporation of eutrophication and other anthropogenic impacts into Ecopath with Ecosim (EwE), one of the more widely used trophic ecosystem modeling frameworks. We found that a number of mechanisms of varying complexity have been used to include these stressors in models, providing managers with a suite of options that can be used to complement their existing management options as they seek to understand the impacts of human interactions on the natural environment.     

Strategic flexibility in shipping: an examination of a sector of the short‐sea ferry market

In the generally more dynamic modern business environment new modes of strategic planning have emerged, in which a premium is attached to the maintenance of flexibility in resource deployment. This paper discusses the principles involved, and considers the capacity of a segment of the sea ferry industry to exploit strategic flexibility as a means of coping with a rapidly changing environment. Potential sources of flexibility are examined in the paper and possible constraints identified. For the sector in question, it appears that strategic flexibility has been unduly limited by the nature of the resources employed, by prevailing corporate values, and by a tendency to respond to environmental uncertainty by short‐term reactions rather than long‐term measures. The general conclusion of the paper is that the sector examined, and possibly the industry as a whole, is strategically weak.     

中国巴士与客车制造业的现实与前景

Consumers can only see a vogue sight of China bus & coach industry.Although it has became the largest manufacturing center in theworld,most main indicators of automotive type are still kept at the level of the last century and its commercial value remains low.As Automobiles are invented more than 100 years ago in Europe and used in public transportation.They became main ways of transportation in human life because of large production in flow line in America.The advantages of private cars lie in its freedom and convenience as well as traveling comfort;traveling by bus&coach is increasingly attractive as the rapid development of road     

自动化实时监测系统在中国台湾高速铁路浅埋隧道的应用

中国台湾高速铁路新竹二高隧道以覆土深度9～12m穿越台湾北部第二高速公路。为了考虑高速公路下方隧道穿越施工时的行车安全,采用自动化监测系统,监控隧道施工产生之顶部路面沉降与隧道侧墙土层之变位。监测系统采用捷仪工程科技公司GeoAuto自动化实时监测软件系统,该系统分前端、中端、后端三部分。前端部分在隧道顶部沿隧道方向安装有自动量测水平倾斜计、在隧道两侧各安装有自动量测垂直倾斜计与伸张仪,另沿高速公路方向安装3排路面沉降点以全站仪自动监测,前述各类仪器皆连接至资料集录器;中端部分为ADSL、直接联机与无线传输等方式进行数据传输;后端部分为GeoAuto自动监测软件系统,所有路面沉降、土层变位等现场数据,皆由前端仪器量测、经中端传输,最后将所有现场有关沉降、变位等数据,皆显现于后端电脑显示器上。在自动监测系统配合下,有效协助浅埋隧道凿进,顺利完成隧道施工。     

Lateral dynamics of motorcycles towing single-wheeled trailers

A motorcycle towing a single-wheel trailer may provide useful transport for light cargo on narrow tracks and off-road use, particularly in rural areas of developing countries. Four designs of such trailers are described. Linear models are derived for the lateral dynamics of an off-road motorcycle towing this type of trailer straight ahead at constant speed. The trailers were tested behind an instrumented motorcycle. Linear autoregressive models were fitted to the experimental data using system identification techniques. Analytical and experimentally derived models largely agreed on frequency, damping and shape of the weave, wobble and trailer sway normal modes. The trailers made the motorcycle's steering heavier but the analytical models did not predict this. The location of the articulation axes between the motorcycle and the trailer were found to be critical for stability. The best trailer design handled well with loads up to 200 kg and speeds up to 70 km/h.