Impact of phytoplankton community size on a linked global ocean optical and ecosystem model

We isolated the effect phytoplankton cell size has on varying remote sensing reflectance spectra (R_rs(λ)) in the presence of optically active constituents by using optical and radiative transfer models linked in an offline diagnostic calculation to a global biogeochemical/ecosystem/circulation model with explicit phytoplankton size classes. Two case studies were carried out, each with several scenarios to isolate the effects of chlorophyll concentration, phytoplankton cell size, and size-varying phytoplankton absorption on R_rs(λ). The goal of the study was to determine the relative contribution of phytoplankton cell size and chlorophyll to overall R_rs(λ) and to understand where a standard band ratio algorithm (OC4) may under/overestimate chlorophyll due to R_rs(λ) being significantly affected by phytoplankton size. Phytoplankton cell size was found to contribute secondarily to R_rs(λ) variability and to amplify or dampen the seasonal cycle in R_rs(λ), driven by chlorophyll. Size and chlorophyll were found to change in phase at low to mid-latitudes, but were anti-correlated or poorly correlated at high latitudes. Phytoplankton size effects increased model calculated R_rs(443) in the subtropical ocean during local spring through early fall months in both hemispheres and decreased R_rs(443) in the Northern Hemisphere high latitude regions during local summer to fall months. This study attempts to tease apart when/where variability about the OC4 relationship may be associated with cell size variability. The OC4 algorithm may underestimate [Chl] when the fraction of microplankton is elevated, which occurs in the model simulations during local spring/summer months at high latitudes in both hemispheres.     

采用微气泡缩减高速船拖曳阻力(英文)

Ship hull form of the underwater area strongly influences the resistance of the ship.The major factor in ship resistance is skin friction resistance.Bulbous bows,polymer paint,water repellent paint(highly water-repellent wall),air injection,and specific roughness have been used by researchers as an attempt to obtain the resistance reduction and operation efficiency of ships.Micro-bubble injection is a promising technique for lowering frictional resistance.The injected air bubbles are supposed to somehow modify the energy inside the turbulent boundary layer and thereby lower the skin friction.The purpose of this study was to identify the effect of injected micro bubbles on a navy fast patrol boat(FPB) 57 m type model with the following main dimensions:L=2 450 mm,B=400 mm,and T=190 mm.The influence of the location of micro bubble injection and bubble velocity was also investigated.The ship model was pulled by an electric motor whose speed could be varied and adjusted.The ship model resistance was precisely measured by a load cell transducer.Comparison of ship resistance with and without micro-bubble injection was shown on a graph as a function of the drag coefficient and Froude number.It was shown that micro bubble injection behind the mid-ship is the best location to achieve the most effective drag reduction,and the drag reduction caused by the micro-bubbles can reach 6%-9%.     

Experimental Investigation of TARMAX Model for Modeling of Hydrodynamic Forces on Cylinder-like Structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous (ARMAX) input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this paper, the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input a...     

Transport infrastructure provision and operations: Why should governments choose private–public partnership?

Recent transport sector liberalisation, as well as global economic crisis, is favouring the implementation of transport infrastructure projects through Public–Private Partnerships (PPP). However, there is a debate as to whether PPP schemes are a better option than conventional procurement. To this end, an evaluation framework is proposed, to assess which of these two alternative schemes for transport projects financing is preferable for the public. The proposed framework is complimentary to the Value for Money (VfM) approach and is based on a Multi Criteria Analysis (MCA). The first step is the estimation of the Public Sector Comparator (PSC) for the case of conventional procurement, dealing with construction, maintenance and operation costs revenues, as well as any costs associated with risks undertaken by the public. As for the PPP case, it includes any payments by the public sector and related risks costs. The MCA is then applied only if the PPP is found preferable for the public sector. The latter considers additional impacts, including among others the social attributes of a particular scheme, job creation, environmental impacts and safety and security aspects. The proposed framework was applied to a pilot Bus Rapid Transit (BRT) corridor infrastructure project in the city of Indore, India, in order to demonstrate its validity. The framework and its application could provide useful guidance when considering PPP for a transport project, since it demonstrates in a transparent way the society's attitude towards this project, something that is critical to its acceptance.     

Regulation,trust and contractual incentives around transport contracts – Is there anything bus operators can learn from public air service contracts?

This paper compares recent experiences in contract negotiation and subsequent commitment in public air services with the bus industry. The heart of the paper is a survey of European and Australian regional airlines, which we mirror with revealed experiences of bus operators. We aim to identify a number of elements in the contracting regimes that have exposed ambiguity and significant gaps in what the principal (e.g., transport department) expected, and what the agent (airline or bus operator) believed they were obliged to deliver. Ultimately airline and bus services are similar in that public authorities procure transport services that are desirable for the society but would be unprofitable without government involvement. In both sectors (theoretically fairly similar) public transport contracts are used, and those usually include obligations and performance measurements. In terms of similarities, one of the surveyed contract details that had a perceived high clarity in both industries was “payment procedures” and amongst those with rather poor clarity was also in both industries “incentives to improve performance and grow patronage”. We also show differences between regional air services and bus operations with regard to performance measurement and pre-specified obligations. Because of the strong safety culture around air services we find that regulation and trusting partnerships are even more important to aviation than to the bus sector. Because of the high level of trust but also because of simpler and more complete contracts in aviation, there is much less (re-)negotiation going on compared to the bus operations.     

Towards a simplified performance-linked value for money model as a reference point for bus contract payments

The burgeoning commitment to contracting the delivery of bus services through competitive tendering or negotiated performance-based contracts has been accompanied by as many contract payments schemes as there are contracts. We are now well placed to design a simplified performance-linked payment (SPLP) model that can be used as a reference point to ensure value for money, given the accumulation of experiences throughout the world which have revealed substantive common elements in contracts. Whether the payment to the operator is framed as a payment per passenger or as a payment per service kilometre, the SPLP identifies efficient subsidy outcomes that are linked to a proxy indicator of net social benefit per dollar of subsidy. We illustrate how the SPLP model can be applied to obtain the gross (subsidy) cost per passenger (or per passenger km) from measures of gross cost efficiency and network effectiveness. This model can then be used as part of a benchmarking activity to identify reference value of money prospects in respect of passengers per $ subsidy outlay by adjusting for influences not under the control of the service provider. A single framework to identify contract payments to operators, and to assess (i.e., benchmark) operator performance on critical KPIs, is provided by internalising critical key performance indicators (KPIs) in the design of the SPLP. The proposed SPLP model is sufficiently general to be independent of the procurement method (competitive tendered or negotiated, for example) and of the treatment of revenue allocation (net or gross based contracts), with the additional advantage of being able to assess value for money for government.     

Modelling the investment decision of the entrepreneur in the tanker sector: choosing between a second-hand vessel and a newly built one

It is often the case that the investor in the shipping sector faces the dilemma of investing in a second-hand vessel or building a new one. This happens because an active second-hand market for almost all kinds of vessels exists. We argue that one of the prime considerations for the investment decision should not be the price of the vessel per se, second-hand (SH) or newly built (NP) but

• ?(a)?the relative price ratio (SH/NP) second-hand price over the new building price and

• ?(b)?the movement of this ratio.

We investigate the determinants of this ratio across different vessel sizes in the tanker sector and show that it can be used as an effective tool in investment decision as well as in asset appraisal.

We employ monthly data between 1995 and 2006 for four different ship sizes–VLCC, Suezmax, Aframax and Handysize–and implement an error correction model.

The investment decision depends on a number of risk and return variables as well as the perceived speed of adjustment of the price ratio to its equilibrium level.

Overall we claim that the cyclicality of the shipping sector together with expectations formed by the agents operating in it (the entrepreneur, the ship-owner and the broker), determine the movement of the ratio and hence the decision of the entrepreneur.     

Some Difficulties inherent in applying Congestion Theory to Marine Problems

This paper sets out to evaluate the main areas of focus within maritime sociology and to link more closely than hitherto the various substantive discussions with general theoretical and conceptual approaches. More specifically, it suggests directions in which maritime sociology may be advanced at both empirical and conceptual levels in the future.     

The EEZ and the progress of fisheries negotiations January to May 1977

This paper discusses negotiations, relative to sea fisheries, in terms of international arrangements—arrangements between the European Economic Community (EEC) and Third Countries; and those between member states of the EEC.     

A dynamic model for marginal cost pricing of port infrastructures

ABSTRACT

A dynamic model for marginal cost pricing of port infrastructures links costs to system performance by combining a power-law function with time-dependent queueing analysis. Additionally, the model incorporates the marginal cost of capacity, including the effects of economies of scale. This allows the calculation of the marginal cost price under a dynamic framework. The model accounts for nonlinear behaviour of port demand, which is sensitive to price and service levels. The effects over time of cost and service levels on the port’s operational performance are quantified. The proposed model allows determining the optimal timing for capacity investment. The model is a starting point for the application of marginal cost pricing to ports. However, for practical application of such pricing method it is necessary to apply a system’s approach, as productivity and costs must be assessed at the terminal’s component level. This should allow the derivation of a marginal cost function at the terminal’s component level.