Variation in predicting pantograph–catenary interaction contact forces,numerical simulations and field measurements

The contact force between the pantograph and the contact wire ensures energy transfer between the two. Too small of a force leads to arching and unstable energy transfer, while too large of a force leads to unnecessary wear on both parts. Thus, obtaining the correct contact force is important for both field measurements and estimates using numerical analysis. The field contact force time series is derived from measurements performed by a self-propelled diagnostic vehicle containing overhead line recording equipment. The measurements are not sampled at the actual contact surface of the interaction but by force transducers beneath the collector strips. Methods exist for obtaining more realistic measurements by adding inertia and aerodynamic effects to the measurements. The variation in predicting the pantograph–catenary interaction contact force is studied in this paper by evaluating the effect of the force sampling location and the effects of signal processing such as filtering. A numerical model validated by field measurements is used to study these effects. First, this paper shows that the numerical model can reproduce a train passage with high accuracy. Second, this study introduces three different options for contact force predictions from numerical simulations. Third, this paper demonstrates that the standard deviation and the maximum and minimum values of the contact force are sensitive to a low-pass filter. For a specific case, an 80?Hz cut-off frequency is compared to a 20?Hz cut-off frequency, as required by EN 50317:2012; the results show an 11% increase in standard deviation, a 36% increase in the maximum value and a 19% decrease in the minimum value.     

The economic impact study of maritime policy issues: application to the German case

Input-output analysis basically provides an estimation of a sector's economic impact by taking into account the indirect effects on all other sectors. For purposes of policy making, however, this may produce rather rigid and inaccurate results. This paper, therefore, introduces some extensions to the basic impact analysis. These extensions secure flexibility, completeness and accurateness of the outcomes. First, an accurate cost structure is determined in a bottom-up approach, i.e. by using data from a sample of representative companies. This allows for reliable outcomes and a flexible definition of sub-sectors. Secondly, the analysis is made in an intercountry context. Thirdly, the expenditure effects of generated income are determined by a macroeconomic module. Fourthly, company-level responses to alternative policy scenarios are investigated and translated into changing model parameters. These four basic elements are applied in a case study concerning the shipping sector of Germany. The scenarios are a continuation of the present policy, a laissez-faire policy, and two framework policies in which the government creates a favourable environment for shipping companies. For each scenario, the effects on value added, employment, tax revenues and expenditures are analysed and evaluated. This paper, thus, shows the relevance of accordingly amplified input-output analysis for policy purposes.     

Market Orientation in Public Transport Research—A Review

It is commonly argued that, in order to meet increasing competition, public transport organizations and systems need to be market oriented. Even though the notion of market orientationhas not been explicitly addressed in public transport research, studies relevant to market orientation have been conducted. The aim of this paper is to introduce the concept of market orientation into the field of public transport, to review previous research into market orientation in public transport research, and to suggest directions for future research. Market orientation is defined as the generation and dissemination of market intelligence by organizations, as well as responses to it. The review suggests that previous academic research has focused on intelligence generation by developing and using models for measuring travel behaviour, stated preferences, perceived customer quality, and satisfaction. Studies of responsiveness have mainly addressed the physical improvements made in public transport organizations, which is also the primary concern of the industry research accounted for. There has been less research into the dissemination of market intelligence, the drivers of market orientation, the relations between the elements, and the overall concept of market orientation in public transport. It is thus concluded that future public transport research needs to address these issues.     

The History of the Transport Future—Evaluating Dutch Transport Scenarios of the Past

Abstract

This paper examines 42 business‐as‐usual (BAU) scenarios for future transport and traffic development in the Netherlands from the period 1970 to 2000. An important aspect of these scenarios is that they indicate the potential future state of the transport system if the policies in place at the time continue unchanged, thus raising issues which may require a policy response. This paper shows that in most of the important BAU transport scenario results of the past in the Netherlands, such as future car use and transport emissions, the policy makers were not misled. The prognoses for traffic congestion are an important exception as they underestimated the congestion problems that would arise. This paper shows that, based on the research it examines, BAU transport forecasting is an inaccurate practice. It is recommended that the BAU scenario designer communicates this high inaccuracy, enabling the policy maker to include the inherent future uncertainty in their decision‐making.     

An algorithm for combining autonomous vehicles and controlled events in driving simulator experiments

Autonomous vehicles can be used to create realistic simulations of surrounding vehicles in driving simulators. However, the use of autonomous vehicles makes it difficult to ensure reproducibility between subjects. In this paper, an effort is made to solve the problem by combining autonomous vehicles and controlled events. A controlled event can be compared to a theatre play. The aim is to achieve the same initial play conditions for each subject, which can be problematic since the traffic situation around the subject will be dependent upon each subject’s actions while driving in autonomous traffic. This paper presents an algorithm that achieves the transition from autonomous traffic to a predefined start condition for a play. The algorithm has been tested in the Swedish National Road and Transport Research Institute (VTI) driving simulator III with promising results. In most of the cases we examined the algorithm could reconstruct the specified start condition and conduct the transition from autonomous to controlled mode in a inconspicuous way. Some problems were observed regarding moving unwanted vehicles away from the closest area around the simulator vehicle, and this part of the algorithm has to be enhanced. The experiment also showed that the subjects drove faster in the presence of controlled everyday life traffic normally used in the VTI driving simulator than in autonomous traffic.     

Benzene concentrations on board chemical tankers

Maritime transport of benzene is regulated by the International Maritime Organisation (IMO). Two important guidelines for a ship’s crew in this matter are IMO circulars 1095 and 1220. The first one describes the minimum safety standards for ships carrying liquids in bulk containing benzene while circular 1220 deals with structural guidelines for new ships carrying liquids in bulk containing benzene, but also technical developments could help in improving safety and health protection on board chemical tankers carrying benzene in bulk. The aim of the present paper is to determine the benzene concentration in the working and living environment on board a modern chemical tanker carrying benzene in bulk, where all safety, technical and operational procedures described by IMO in the above-mentioned circulars are followed. During specific cargo operations, we measured the benzene concentrations on different locations on board by means of Radiello® passive diffusive samplers. Despite all measures taken, we found an important difference in benzene concentration between operations with a benzene cargo compared to operations without benzene on board, as well as inside and outside the accommodation. Moreover, even during discharge operations, where the emission is theoretically zero, we found an important increase in the benzene concentration. In addition, we found less favourable results for the engine room.     

The effects of highway development on housing prices

The purpose of this research is to estimate the effects of highway development projects on the price of housing. Transportation development projects, highways in particular, improve a certain area’s accessibility but also increase its levels of exposure to traffic intensity and noise pollution. These externalities are evaluated by homeowners and residents and are reflected in the price of housing. In this paper, we use several repeat sales model specifications, including difference-in-differences estimators, and control for neighborhood effects to examine housing price trends in the municipalities around two newly developed highways in the Netherlands. The results of the research demonstrate that changes in accessibility result in a significant positive effect on the price of housing in nearby municipalities, but that increased noise pollution and traffic intensity levels result in a decrease in prices. The findings also confirm that combining the total effects of all externalities, the effect of highway development on the price of housing is generally positive, and this effect is salient even before the project is completed due to public anticipation effects.     

Estimating the inefficiency in the Norwegian bus industry from stochastic cost frontier models

A stochastic cost frontier function based on data from 170 of the 175 Norwegian subsidized bus companies is estimated under two alternative presumptions regarding the distribution of the inefficency among the bus operators. When the inefficiency is assumed to be half-normally distributed, the average inefficiency in the industry is estimated to be 13.7 per cent. This calculated value is nearly halved (7.2 per cent) when the exponential distribution is applied, while the ranking of the companies according to inefficiency is unchanged. By regressing the estimated inefficiency values for each company on some exogenous variables describing its ownership structure and the subsidy policy which it faces, it is seen that inefficiency of the companies which negotiate with the public authorities over the subsidy amounts is slightly higher than the inefficiency of the companies which face a subsidy policy based on cost norms. Our analysis gives, however, no significant differences in the efficiency between privately owned bus companies and publicly owned bus operators, and shows only minor economies of scale.     

Fatigue reliability—measured response of the heidrun TLP tethers

One of the most important uncertainties associated with fatigue damage of TLP tethers is the uncertainty related to fatigue loading. Higher–order load effects are important and such effects are very complicated to determine numerically. The Heidrun TLP was installed in the summer of 1995 and for this platform the forces in the top of the tethers are measured during the operational phase. In this paper the results of these measurements are discussed and compared with numerical calculations. It is shown how the measurements of fatigue loading can be used to improve the fatigue reliability and reduce the need for in-service inspections.     

Empirical relation between the typhoon surge deviation and the corresponding typhoon characteristics: a case study in Taiwan

The relation between typhoon surges and typhoon characteristics measured at Kenfang Tidal Station on the northeast coast of Taiwan was studied in this paper. Typhoon characteristics include the typhoon center atmospheric pressure, the typhoon near-center wind speed, the typhoon storm radius, the distance between the typhoon center and the tidal station, and the typhoon approach tracks. The results show that the typhoon surge deviation is strongly dependent on typhoon characteristics. An empirical typhoon surge formula is proposed in terms of the typhoon wind speed, the typhoon storm radius, and the distance between the typhoon center and the tidal station. The coefficients in the empirical formula were evaluated, based on the measured typhoon surge data at Kenfang Tidal Station. The storm surge deviations at Kenfang Station during Typhoons Doug (1994) and Herb (1996) estimated using the proposed empirical formula were compared with the measured data as well as with the results of a numerical study.