Operating strategy for gasoline/diesel dual-fuel premixed compression ignition in a light-duty diesel engine

Environmental problems have become a major issue for diesel engine development. Although emission aftertreatment systems such as DPFs (diesel particulate filters), LNTs (lean NOx traps) and SCR (selective catalytic reduction) have been used in diesel vehicles, the manufacturing cost increase caused by this equipment can be hard to be control. Thus, it is better for engine emissions to be reduced by improving the combustion system. A dual-fuel combustion concept is a recommended method to improve a combustion system and effectively reduce emissions. Low reactivity fuel including gasoline and natural gas, which was supplied to the intake port by the FPI (port fuel injector), improved the premixed air-fuel mixture conditions before ignition. Additionally, a small amount of high reactivity fuel, in this case diesel, was injected into the cylinder directly as an ignition source. This dual-fuel combustion promises lower levels of NOx (nitrogen oxide) and PM (particulate matter) emissions due to the elimination of local rich regions in the cylinder. However, it is challenging to control the dual-fuel combustion because the combustion stability and efficiency deteriorate due to the lack of ignition source and reactivity. Thus, it is important to establish an appropriate dual-fuel operating strategy to achieve stable, high efficiency and low emission operation. As a result of this research, a detailed operating method of dual-fuel PCI (premixed compression ignition) was introduced in detail at a low speed and low load condition by using a single cylinder diesel engine. Engine operating parameters including the gasoline ratio, a diesel injection strategy consisting of multiple injectors and timing, the EGR (exhaust gas recirculation) rate and the intake pressure were controlled to satisfy the low ISNOx (indicated specific NOx) and PM emissions levels (0.21 g/kWh and 0.1 FSN, 0.040 g/kWh, respectively) as per the EURO-6 regulation without any after-treatment systems. The results emphasized that a well-constructed dual-fuel PCI operating strategy showed low NOx and PM emissions and high GIE (gross indicated fuel conversion efficiency) with excellent combustion stability.     

Development of a valve and optimization of a tube for self-inflating tire

Worldwide, the tire market requires safe and eco-friendly tires. In this study, a self-inflating tire (SIT) was studied and manufactured. Self-inflating tire refers to a technique for maintaining appropriate tire pressure. An internal regulator senses when tire inflation pressure has dropped below the set air pressure. The tire boosts air through the valve when rolling and compressed air enters into the tire. This procedure keeps the tire air pressure at an appropriate level and increases tire safety. In this study, a regulator was used as a negative-pressure system. A check valve was selected the minute flow check valve depending on the shape of the configured system. In addition, the material of the tube was developed with excellent physical properties and resistances (elastic rebound, working temperature, etc.) owing to its complete compression and restoration. A tube performance tester was developed and a computer aided engineering (CAE) model was modeled for comparison with the test results. Using the tester and model, it was possible to optimize the shape of the tube and regulator. Finally, the reliability of the study was verified through the prototype test. The developed equipment and systems can be used for the manufacture of high-performance and safe tires.     

柴油机燃用生物柴油的排放特性试验研究

在一台四冲程直喷式柴油机上进行了燃用生物柴油混合燃料的试验研究,分析了掺混不同比例生物柴油时柴油机的燃烧与排放性能.结果表明,与燃用纯柴油相比,燃用生物柴油混合燃料可改善燃烧过程,大幅降低HC、CO的排放,但同时会引起NOx排放量的增大;燃用生物柴油可大幅降低微粒排放,且随柴油中掺混生物柴油比例的增大,降低程度也逐渐增大.     

国际燃料电池汽车技术研发动态和发展趋势

在很多国家,无论是政界还是企业界,都积极支持燃料电池汽车开发,相继开展了示范项目.作者从多个角度全面介绍了各国政府、企业支持的政策和措施,并具体概述分析了国际燃料电池汽车发展新动态及我国燃料电池汽车示范项目进展.     

An ERP approach for container terminal operating systems

The major characteristics of ERP (Enterprise Resource Planning) are an enterprise-wide system that covers all the business functions and information resources, integrated database, built-in best industry practice, packaged software and open architecture. ERP enables reduction of system development time, flexibility, standardization of workflow and effective business planning capability. ERP is mainly for the manufacturing industry. However, the principles of ERP can also be applied to container terminal operating systems. This paper presents an ERP system approach for a container terminal. It has clustered the workflow of a container terminal and analysed the business process to generate the best workflows. The integrated database is designed to eliminate redundancy and keep integration. The core of ERP for container terminal is the planning facility such as berth planning and yard planning. The planning capability is very tightly coupled with data flow from client entities such as shipping companies. The ERP can handle the existing problems of container terminal operation that are mainly caused by lack of integration of a whole information resource in a container terminal, ad-hoc and poor planning capability, disconnected and incorrect data from client companies. The ERP approach can not only resolve the problems of container terminals but also promote adoption of information systems for container terminals in the world that have not yet implemented terminal operating systems.     

Incident reporting in Finnish shipping companies

The purpose of the International Safety Management Code (the ISM Code) is to promote safety culture in the maritime industry. Learning the lessons from incidents should help to improve safety performance since incidents and accidents can share the same root causes. The aim of this paper is to take a closer look at incident reporting in the Finnish shipping industry, to study the reasons for poor incident reporting and to suggest improvements to increase reporting. The paper consists of a literature study, which focuses on previous studies concerning incident reporting, and an interview study, which focuses on Finnish shipping companies and their personnel. The interview study confirmed that incident reporting does not function properly within the Finnish maritime industry. The maritime personnel have an occupational culture which is incompatible with the rule-based safety management approach provided by the ISM Code. The willingness to report incidents could be increased if all seafarers were involved in the reporting process and the preparation of corrective actions. In addition, the reporting procedures should be streamlined and developed to a more user-friendly direction.     

Zonal centrality measures and the neighborhood effect

The goal of this study is to develop a robust methodology for computing zone centrality measures in an urban area. Centrality refers to the relative importance of a zone in terms of network efficiency and utility for both transportation and urban study. Centrality indices that were developed to describe human relationships in the field of structural sociology were adopted. It is important to accommodate the neighborhood effect in dealing with centrality. The neighborhood effect describes the phenomenon whereby the attractiveness of a specific zone is affected by its neighbor zones. Kernel functions were employed to accommodate the neighborhood effect. The optimal bandwidth parameters were derived indirectly within the framework of trip attraction estimation under the assumption that the trip attraction of a zone is influenced by the integrated centrality, which includes the neighborhood effect. The well-known estimation tool of maximum likelihood estimation (MLE) was adopted to find the optimal bandwidth. As a byproduct of accommodating the neighborhood effect in centralities, a considerable advantage of the present study is an enhancement of the performance of trip attraction model. Another meaningful contribution of this study is a solution to the question of an acceptable delineation of the two city centers in Seoul. The boundaries of the two city centers were derived based on both the kernel function and its bandwidth.     

哈大客运专线精密测量组织管理

结合哈尔滨至沈阳段无碴轨道精密控制测量测设过程，简要介绍无碴轨道精密测量的组织管理。     

Performance assessment of bus transport reform in Seoul

Seoul city authority implemented an innovative bus transport reform (BTR) in July 2004. This paper evaluates the performance of that reform. To this end, the paper includes a discussion of the features of the reform, an explanation of the fields and the contents of the reform, and an assessment of the performance of the reform formulated by comparing pertinent circumstances in place before and after its inception. The performance of eight fields: bus routes, bus fares, bus management, bus operation, a new smart card, a median bus lane system, vehicles and stops, and the promotion of the BTR, are measured, as are the performances of four groups influenced by the BTR. Those groups are bus passengers, bus operators, transport regulators, and members of the wider civil community. The results indicate a readily apparent decrease in traffic density in Seoul after the introduction of the reform, and it would appear that the increase in the number of public transport users bears an inverse relationship with the decrease in the transport share of private cars.     

Torque ripple minimization control of permanent magnet synchronous motors for EPS applications

This paper identifies a control method used to reduce torque ripple of a permanent magnet synchronous motor (PMSM) for an electric power steering (EPS) system. NVH (Noise Vibration Harshness) is important for safe and convenient driving. Vibration caused by motor torque is a problem in column type EPS systems. Maintaining a very low torque ripple is one solution that allows for smoother steering. Theoretically, it is possible to design and drive the motor without torque ripple. However, in reality, a PMSM system torque ripple is caused by the motor itself (saturation in the iron core and EMF distortion) and the imperfect driver. This paper analyzes torque ripple of a PMSM system, and an advanced PMSM control method for the column typed EPS system is presented. Results of the analysis indicate that the compensation current is needed in order to minimize torque ripple when a PMSM is driven.