Load-leveling suspension system with a magnetorheological damper

In this paper, a load-leveling suspension system with a magnetorheological (MR) damper is investigated. In this suspension system, the MR damper is connected to a spring to form a load-leveling suspension system. The system effective stiffness and damping can be adjusted by controlling the MR damper. The characteristics of a load-leveling suspension system are studied first. When the linear damper is replaced with an MR damper, the averaging method is adopted to obtain the steady-state response of the nonlinear system. A comparison demonstrates that the results of the averaging method are in good agreement with those obtained by numerical simulations. The analytical results are then verified experimentally. The load-leveling suspension system studied here is able to adjust both suspension stiffness and damping and, hence, it may provide more effective vibration control in a wider frequency range, when the damper is controlled.     

桥梁静动载试验检测方法

我国近年来公路桥梁建设发展迅猛,而质量是公路桥梁建设的永恒的主题。该文综述了桥梁静动载试验检测方法,及其主要工作内容和发展方向。     

Why are work travel plans effective? Comparing conclusions from narrative and meta-analytical research synthesis

Reliable research synthesis is of high significance for a transport policy which tries to base its decisions on available empirical evidence. There is growing doubt whether the frequently used narrative approach provides a scientifically defensible way of synthesising a body of quantitative research results. The present paper demonstrates meta-analysis as a more objective and powerful alternative for this task. For this purpose evaluation data synthesised in two earlier narrative reviews on the effectiveness of work travel plans [Cairns et al. Making travel plans work: research report (former), Department for Transport, Local Government and the Regions (DTLR), London, 2002; Smarter choices—changing the way we travel. (Final report of the research project: The influence of soft factor interventions on travel demand. Research report for the Department for Transport.) London. Retrieved 1 December 2005, from , 2004] are meta-analytically re-analysed and compared with the conclusions drawn from the narrative synthesis of these data. Our meta-analyis provides only limited support for the conclusion that addressing parking is the hallmark of successful work travel plans. Our meta-analysis indicates that site and organisational factors as well as characteristics of the monitoring process are significant predictors of effective work travel plans, whereas Cairns et al. view little evidence for the impact of these factors.     

Guidelines for samplers: measuring a change in behaviour from before and after surveys

This paper addresses the issue of using before and after surveys to evaluate behavioural changes in response to transport policies and investments, a procedure that, we argue is done far too rarely in this profession. Further, it demonstrates very clearly that, in almost all conceivable cases, there are considerable economies to be obtained by using a panel (again, under-utilised in our profession) to undertake evaluation, rather than successive independent cross-sectional surveys. The paper also addresses the critical issue of sample size requirements for measuring changes of a relatively small magnitude in travel behaviour; i.e., to state, with 95% confidence, that if there is a ∂ percent change in behaviour for the sample, there is a ∂ percent ± e percent change in the behaviour of the population, where e is the sampling error. In this paper, we present a method for calculating such sample size requirements from first principles and demonstrate the applicability both hypothetically and then empirically using data from the Puget Sound Transportation Panel. The formulation enables designers of before and after surveys to investigate the trade-offs between the statistical accuracy of their predictions and the sample size requirements systematically, without the need to specify ∂ a priori. This latter point is crucial, we argue, because we have limited information on ∂, yet, as we explain here, it drives the sample size requirements using alternative, well-cited approaches for calculating sample sizes to assess behavioural change. The results have important ramifications both for those implementing transport policies intended to produce behavioural change, especially when a cost-benefit evaluation of the policy is desired, and for those interpreting the results reported in previous studies.     

含砂低液限粉土路基冲击压实技术研究

针对含砂低液限粉土路用性能差,常规压实方法难以达到压实度要求等施工难题,采用冲击碾压技术进行路基补压试验,获取冲压遍数、冲压沉降量等施工控制参数。通过试验确定采用沉降与面波法进行冲压质量评价,为全线推广使用冲击压实技术提供技术保障。     

Climate change and the future Maritime Policy for the EU

A cross-cutting Maritime Policy can ensure that climate change threats and challenges in regards to seas and oceans are dealt with in a wide policy framework that takes into account the impacts that climate change may have on other sectors and vice versa.     

关于CTCS-2级列控系统应急预案的探讨

阐述了CTCS-2级列控系统设备故障后，司机、车站值班员、列车调度员、电务值班员、电务段调度等应如何处理，提出了CTCS-2级列控系统满足动车组安全运行不间断应急处理的总原则。     

Basic design of a series propeller with vibration consideration by genetic algorithm

Genetic algorithms (GAs) can powerfully search for parameters in a large multidimensional design space. Thus, the principle can be applied to preliminary series propeller design problems with multiple considerations. In the present study, B-series propeller design was conducted using a GA for both hydrodynamic efficiency and vibration consideration. The objective function was set by users who could freely weight the relative importance of efficiency and vibration. GAs were successfully shown to be able to obtain an optimal set of parameters leading to efficient performance and low vibration.     

北京城轨八通线车辆电气牵引系统

介绍了北京城轨八通线车辆电气牵引系统的主要构成,简述该系统的实现、控制原理与主要设备的技术参数。     

Study on fast calibration of a ULA＇s gain and phase error

Array calibration is important in engineering practice. In this paper, fast calibration methods for a ULA＇s gain and phase errors both in far and near fields are proposed. In the far field, using a single sound source without exact orientation, this method horizontally rotates the array exactly once, performs eigen value decomposition for the covariance matrix of received data, then computes the gain and phase error according to the formulas. In the near field, using the same single sound source, it is necessary to rotate the array horizontally at most three times, build equations according to geometric relations, then solve them. Using the formula proposed in this paper, spherical waves are modified into plane waves. Then eigen values decomposition is performed. These two calibration methods were shown to be valid by simulation and are fast, accurate and easy to use. Finally, an analysis of factors influencing estimation precision is given.