绳轮式玻璃升降器耐久试验分析与研究

文章通过对比国内外汽车行业台架耐久试验方法,从台架耐久失效模式与实车失效模式结合用户具体实际情况,阐述了在提高玻璃升降器全生命周期以及用户主观感受方面,零部件级验证、系统级台架验证、整车级耐久验证都是车辆开发环节不可或缺的一部分。     

浸水劈裂试验评价沥青混合料水稳定性

在比较浸水马歇尔试验和冻融劈裂试验优缺点的基础上,深入分析了高温潮湿地区沥青路面水损害的产生机理,优化设计了浸水劈裂试验,较好地模拟了实际路面的水损害,比较适宜作为高温潮湿地区沥青混合料水稳定性评价方法.     

球墨铸铁与灰口铸铁的超声衰减鉴别

根据球墨铸铁与灰口铸铁的石墨形态和石墨结构的特征,利用超声波在球墨铸铁和灰口铸铁中的传播和衰减的差异,阐述了一种现场鉴别球墨铸铁件与灰口铸铁件的检测方法———超声衰减法。经过现场应用和验证,证明采用这种超声衰减法可以有效地解决上述球墨铸铁与灰口铸铁件的现场鉴别问题,且该方法简便、准确、快捷。     

A New Technique of High-performance and Fast Tensioning Prestressed Anchorage CableEI北大核心

Research purposes: The large-span transition section tunnel of the Badaling Great Wall station on the Beijing-Zhangjiakou high-speed railway with the maximum excavation width of 32.7 m, and the largest excavation area of 494.4 m 2 , is the world's biggest traffic tunnel in the world with the largest excavation width and excavation area, which has difficult construction and high security risks. The initial support system of tunnel is mainly realized by prestressed bolt, prestressed cable and shotcrete. After test, anchor cable tension using the traditional anchor cable construction technology can't meet the design requirements, at the same time, it takes about 30 days to achieve prestressed tensioning. Therefore, we need to study the high-performance fast tensioning prestressed anchor cable technology, to effectively control surrounding rock deformation, to ensure the safety of construction, improve construction efficiency. Research conclusions:(1) The traditional anchor cable construction technology is adopted. The anchor cable tension value is mainly controlled by the grip force between the anchor rope and grouting body and the cohesive force between grouting body and surrounding rock. (2) The grip force between the anchor rope and the grouting body can be increased by about 2 times by increasing the "barb"; The cohesive force between the grouting body and the surrounding rock can be increased by 1.5 times by 6 ~ 7 MPa high-pressure grouting process. (3) The modified sulphoaluminate cement slurry can reach more than 30 MPa within 1 day of the slurry strength, so as to realize fast anchor cable tension within 1 day after grouting completion. (4)The research results can be used for reference in similar prestressed anchorage cable construction projects. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

TBM施工中通风和散热问题的研究

分析了风管安装中的风管漏风量及常用典型漏风计算公式,并运用热贯流系数概念推导出冷水输送温度和管道长度的连续函数关系式,确定出工作面的供水温度。结合超长隧洞TBM施工通风和降温实例,利用FORTRAN语言编制了计算机程序,能够较准确、快速地解算施工中的通风和降温问题。     

天津地区C45桩基混凝土配合比设计

根据工程所处施工环境情况和水下混凝土的特点,介绍了C45桩基水下混凝土的配合比设计方法,并对配合比设计特点和施工中容易出现的问题进行了阐述。C45桩基混凝土由于配制强度高,掺合料掺量大,混凝土和易性要求高,增加了配合比试配的难度。试验室在配合比选定时进行了大量的试配工作,给出了C45桩基水下混凝土配合比参数建议值,并在施工中得到了良好的应用,对其他类似工程高标号桩基混凝土的设计和施工具有一定的借鉴作用。     

基于AMESim /Simulink的调距桨装置伺服系统联合仿真对比研究

在调距桨装置电液伺服系统数学建模的基础上,利用Matlab/Simulink对模型进行仿真。同时应用AMESim与Matlab/Simulink联合仿真技术对调距桨数学模型进行对比分析,为进一步进行调距桨的半物理仿真打下基础。     

船用巷道堆垛机框架结构强度分析

以某船用巷道堆垛机为模型样本,以ANSYS软件为平台建立框架结构的有限元模型,并求解分析。将计算结果反馈用于指导设计,验证设计思路的可行性,以为改进设计提供依据。     

无溶剂绝缘漆常用活性稀释剂——苯乙烯

介绍了无溶剂绝缘漆广泛使用的活性稀释剂——苯乙烯的性质,并着重探讨了它的化学反应性、毒性等问题,并提出了在无溶剂漆生产使用过程中安全使用、降低危害的建议。     

城市轨道交通供电系统35 kV母联主动式自投方案研究

分析了目前城市轨道交通供电系统中三种35 kV母联自投启动方案的优缺点.提出了基于保护跳闸信号的主动式自投启动方案,缩短了自投的动作时间,使自投范围更加准确,且在变电所反向供电运行方式下仍可准确动作.