甘肃经济增长质量的综合评价

经济增长是经济学界一直关注的热点问题,改革开放以来,经济增长已成为地区经济发展的主要评价指标.本文目的在于全面、客观、多视角地阐述影响经济增长的量化和非量化因素,从而测算出甘肃省经济增长的适度区间,并对我省1979-2004年经济增长质量进行综合评价,以确定经济发展的高质量期.     

生物接触氧化法处理洗浴废水的填料选择研究

生物接触氧化法处理洗浴废水的填料选择研究以软性纤维和软性泡沫作为备选填料,采用活性污泥挂膜法,浅析了膜培养过程中的影响因素.最后通过最佳水力停留时间这一废水处理指标对备选填料进行比较,最终选择软性泡沫作为动态实验填料.     

长铃CM125摩托车降噪技术试验研究

利用噪声源分离技术对摩托车噪声源进行识别,得出排气系统是最主要的噪声源,而轮胎辐射噪声对摩托车加速噪声影响很小。在此基础上,通过优化消声器结构、改进摩托车吊架,使得该车加速噪声由80．9 dB(A)降至76．5 dB(A),取得了良好降噪效果。     

国产摩托车欧Ⅲ排放解决方案及催化净化技术的应用

控制摩托车排气污染是一项系统工程,必须遵循先机内、后机外,内外协调的方针。无论是采用化油器还是电喷发动机,要满足欧Ⅲ排放标准,催化净化是最有效的技术手段。在对化油器优化的同时进行二次补气和催化转化是一种成本低、见效快的达标方案,而电控燃油喷射与三元催化净化则是满足欧Ⅲ及未来更严格排放标准的必然方向。     

一种天然气发动机尾气净化技术路线探索

为使天然气发动机满足现阶段排放要求,主流企业均采用当量燃烧+EGR+TWC技术路线,文章通过研究一种提高天然气发动机进气量的燃烧及相应的尾气净化技术,同样可以满足排放要求,且发动机无需EGR,结构简单,气耗更低,同时有效降低整车热负荷,为重型天然气发动机满足更高排放要求提供新的解决思路.     

刚构体系独塔斜拉桥施工期抖振响应

为了更准确地计算桥梁抖振响应,以采用刚构体系的某带大挑臂钢箱结合梁独塔斜拉桥最大双悬臂施工阶段为研究对象,首先在有限元建模中重点讨论因塔梁固结处节点刚性区建模方法不同而导致的桥梁结构动力特性差异;随后运用二维不可压非定常雷诺平均URANS数值模拟方法,识别大挑臂钢箱主梁断面静力三分力系数和气动导纳;最后基于Davenp...     

船用中速柴油机的进气门早关米勒循环（英文）

In this study, a one-dimensional simulation was performed to evaluate the performance of in-cylinder combustion to control NO_x emissions on a four-stroke, six-cylinder marine medium-speed diesel engine. Reducing the combustion temperature is an important in-cylinder measure to decrease NO_x emissions of marine diesel engines. The Miller cycle is an effective method used to reduce the maximum combustion temperature in a cylinder and accordingly decrease NO_x emissio...     

我国公路桥梁汽车荷载演变与比较

对国内三个历史阶段的公路桥涵设计通用规范中有关公路桥涵汽车荷载的形式、量值、折减系数、冲击系数等以及其作用、在选定结构上的响应进行了较为系统的分析与比较。对现有规范中汽车荷载的合理性做了初步探讨。最后提出了今后可能的发展趋势。     

Tool Wear Prediction in Micro-end-milling with Hard Material

The applications of micro-machining have increased drastically in the last ten years. However, tools with less than 1mm diameter using for micro-mills have very short and unpredictable life when they are used to cut hard metals. In this study, preliminary design of experiment (DOE) test program was conducted to investigate and identify the factors affecting tool wear at the micro-scale with hard material. Analysis of variance (ANOVA) and Taguchi method were efficient to determine appropriate cutting condition and the effect of parameters. A simple model was also developed to predict the width of slots on the workpiece along the cutting length. The obtained results can provide the basic guidelines for parameter setting of micro-end-milling with hard material.     

Cryptanalysis of Two Pseudo-attacks from the Same Mathematic Mistake

Yang and Shieh proposed a timestamp-based password authentication scheme. Fan and Shen gave different improvements on it. Wang claimed that Fan's improvement is insecure and gave his attack. Yang did the similar things on Shen's scheme. This paper gave further cryptanalysis on Wang's and Yang's attacks and pointed out that both of their attacks are infeasible. Wang and Yang made the same mathematic mistake and their attacks are pseudo.