载货汽车主气瓶不同气压时制动性能分析

汽车综合性能测试仪VGQT测试分析结果表明,货车在主制动气瓶压力不同时,各轴制动气室所能达到的最大压力也不相同[1],除此之外,本试验中N类载货汽车0型制动试验表明,主气瓶气压不同时,各轴气室制动压力变化曲线以及有效最大减速度MFDD也不相同。载货汽车绝大部分是用于长途运输,尤其是N2、N3类载货汽车,由于其满载质量大,长途运输中制动效能对于行驶安全性有着很大的影响,尤其在我国西南部山道纵横,长时间上下坡很容易造成制动器的热衰退,这是引起交通事故的主要诱因之一[2,3]。本文以实际试验结果为研究对象,分析了主气瓶在不同压力下各轴制动气室压力的变化以及0型制动试验中制动气压曲线的变化和有效最大减速度的变化,这对于行驶安全性和燃油经济性都有一定的意义,进而对排放和环境造成影响。     

不锈钢车体钝化工艺研究

针对轨道交通车辆在制造过程中,不锈钢车体表面的钝化膜因机加工、焊接等因素可能遭到破坏,导致不锈钢车体防腐能力下降的情况,详细介绍了不锈钢车体的钝化原理、钝化工艺及钝化效果的检测方法。经过柠檬酸钝化液钝化处理后,可有效去除车体表面游离铁和其他杂质,车体表面颜色均匀一致,提高了不锈钢车体的耐蚀性和美观性。     

两种跨平台航迹精度测评方法研究

跨平台航迹精度测评对多平台协同使用传感器航迹数据具有指导意义,论文介绍了相对于本平台距离/方位的测评方法(方法一)和空间距离精度的测评方法(方法二),从非线性坐标变换的角度分析了本平台位置对测评结果的影响,其中方法一的计算结果在两平台位置相差不大的情况下主要受被探测目标相对于这两个平台的方位角度差影响,方法二的计算结果则不受本平台位置的影响,因而后者更有意义。     

Occupant injury risk analysis at NASS/CDS database

Injury information for vehicle occupants from the body regions of the head, thorax, abdomen, and upper and lower extremities, due to the restraints and interior parts of the vehicle, were extracted from the 2009 ~ 2012 NASS/CDS database. For those cases with high occurrence frequency, a detailed and comprehensive data analysis was performed to find the relationship between the accident, occupant, vehicle, and injury data. A numerical frontal impact sled model with the Hybrid III dummy and the GHBMC human body model was constructed to simulate and identify those injury risks according to NASS/CDS. Among the 5,734 injuries to the aforementioned body regions from frontal crashes are, listed by frequency of occurrence, the lower extremity (27.8 %), upper extremity (21.3 %), thorax (15.1 %), face (10.9 %), spine (8.7 %), head (7.3 %), and abdomen (6.9 %). The main injury sources to the head were the windshield, side structure, and steering wheel. For the thorax and abdomen they were the seat belt and steering wheel. For the lower extremity it was the instrument panel. The main injury patterns for the head were the concussion and the contusion. For the thorax they were vessel laceration and lung contusion. For the abdomen they were laceration and contusion of the organs. For the lower extremity they were bone fracture and ligament rupture. The steering wheel and seat positions were main factors affecting head and thorax injury risks. From the sled impact simulation, high injury risks of the head and thorax were assessed respectively at conditions of steering column tilt down and rear most seat position, which correlated well with the findings from the NASS/CDS data analysis.     

Integrated approach to an optimal automotive timing chain system design

Ensuring engine efficiency is a crucial issue for automotive manufacturers. Several manufacturers focus on reducing the time taken to develop and introduce brand new vehicles to the market. Thus, a synergic approach including various simulations is generally adopted to achieve a development schedule and to reduce the cost of physical tests. This study involved proposing a design process that is very useful in the preliminary development stage through effective support from simulations. This type of simulation-based design process is effective in developing timing chain drives; the use of this process, based on results from multiple trials, showed improvements in performance including low friction and vibration, improved durability, and cost-effective part design when compared to conventional processes. This study proposes an integrated approach to the preliminary design of an automotive timing chain system. The approach involves structural and dynamic analyses. The details of the design process are described by using the case of a virtual engine. This study conducted and summarized a dynamic and structural analysis as well as topological optimization to describe a process to obtain optimal results. The results of this study indicated the following improvements in overall performance factors: 12.1 % improvement in transmission error, 10.1 % reduction in chain tension, 46 % reduction in tensioner arm weight, and 11 % reduction in transversal displacement.     

短线匹配法预制拼装技术及其工程应用

短线匹配法节段预制拼装技术是将整孔箱梁设计成若干个标准节段,工厂内逐节段匹配预制,架桥机现场拼装的施工技术。该项技术1965年最早出现在法国,在国外得到了广泛应用。2002年自苏通大桥开始,我国逐步实现了短线匹配法的大规模应用以及设计、施工、装备、材料等技术的全面国产化。结合我国已建成的几座代表性的短线匹配法桥梁工程,对短线匹配法节段预制拼装的接缝质量控制、线形控制及长期性能保证等关键要点进行了论述,对短线匹配法施工技术应用中存在的问题及未来发展趋势进行了初步分析。     

掺锶磷酸钙骨水泥的体外细胞生物学性能评价及其与掺锶量的相关性

目的 评价"SrHPO4/Ca4(PO4)2O/CaHPO4"系掺锶磷灰石骨水泥的生物相容性及其与掺锶量的关系.方法 通过急性全身毒性、热原性、溶血性、体外细胞毒性以及成骨细胞在材料表面的黏附、增殖与表达等实验,检测材料的性能及生物降解潜能.结果 "SrHPO4/Ca4(PO4)2O/CaHPO4"系掺锶磷灰石骨水泥的急性全身毒性、热原性、溶血性、体外细胞毒性均为合格.Sr-CPC的热原性、溶血性以及碱性磷酸酶值与掺锶量呈非线性关系.结论 含锶磷酸钙骨水泥体外细胞生物相容性良好,是安全的新型骨组织工程支架材料.     

氧化苦参碱对慢性肾脏病患者血清TGF-β1和Col Ⅲ的影响

目的观察氧化苦参碱对慢性肾脏病(CKD)患者血清转化生长因子-β1(TGF-β1)、Ⅲ型胶原(ColⅢ)的影响,探讨其在肾间质纤维化发生发展过程中的作用和治疗价值。方法选取健康对照者10例、慢性肾脏病患者40例,根据肾小球滤过率(GFR)分为轻度肾损害组(GFR<90 mL/min.1.73 m2,CKDⅠ)、中重度肾损害组(GFR<60 mL/min.1.73 m2,CKDⅡ),再分层随机抽样,分为常规治疗组和氧化苦参碱组。利用双抗体夹心酶联免疫吸附法分别检测各研究对象治疗前、后血清TGF-β1、ColⅢ含量,采用t检验比较两组TGF-β1、ColⅢ水平的差异。结果氧化苦参碱组TGF-β1、ColⅢ含量显著低于常规治疗组(P<0.05)。结论氧化苦参碱可能通过下调TGF-β1、ColⅢ水平,减少ECM沉积,从而达到防止肾间质纤维化的作用。     

饲料加硼对摄入过量氟的实验大鼠骨损伤的预防作用

目的探讨饲料加硼对过量氟摄入的大鼠骨损伤的预防作用。方法24只4-5周龄Sprague-Dawley(SD)大鼠分为:对照组(喂饲基础饲料,饮蒸馏水)、过量氟组[喂饲基础饲料,饮含100mg/LF-(氟化钠221mg/L的蒸馏水)]、硼预防组(喂饲加硼饲料,饮含100mg/LF-的蒸馏水)。实验3月后测量大鼠血清氟、硼含量及血清碱性磷酸酶(alkaline phosphatase,AKP)活性、骨氟和骨总RNA含量、胫骨纵径横径和干重及骨密度(bone mineral density,BMD),并检测大鼠股骨生物力学特性。结果和对照组比较,过量氟组大鼠血清氟、骨氟含量和血清AKP活性显著增高;骨总RNA含量、全身骨骼平均BMD和胫骨BMD降低;胫骨纵径、横径和干重减小;股骨最大负荷减低,最大形变增加。相比过量氟组,硼预防组大鼠血清氟和骨氟含量及AKP活性明显下降;骨总RNA含量、全身骨骼平均BMD、腰椎和胫骨BMD显著增高;胫骨纵径、横径和干重,股骨最大负荷明显增加。3组大鼠血清硼含量无显著性差异。结论大鼠摄入过量氟可出现明显的骨损伤,饲料加硼对此有一定的预防作用。     

南京长江隧道盾构始发井深基坑降水方案设计

南京长江隧道工程盾构始发井深大基坑地质条件复杂,地下水位高,并与长江水力联系密切,降水难度大.文章结合实践,重点阐述了本工程采用深井管井与轻型井点结合降水方案的设计,其中包括涌水量的计算、降水井数量的确定及降水井间距布设等参数研究,对今后同类工程的修建有一定的借鉴意义.