Field measurements of the evolution of wheel wear and vehicle dynamics for high-speed trains

This investigation demonstrates the wheel wear evolution and related vehicle dynamics of high-speed trains with an operating distance (OD) of around two million kilometres. A long-term experimental test lasting two years was conducted to record the wheel profiles and structural vibrations of various trainsets. The wheel wear, namely the profile shape, worn distribution and wheelset conicity, is investigated for several continuous reprofiling cycles. Typical results are illustrated for the stability analysis, and the ride quality is examined with increasing OD. In addition, the vibration transition characteristics between suspensions are investigated in both the time and frequency domains. The experiments show that the dominant wear concentrates on the nominal rolling radius, and the wear rate increases with OD because of the surface softening resulting from the loss of wheel material. The vibration of structural components is aggravated by the increase of the equivalent conicity of the wheelset, which rises approximately linearly with the wheel wear and OD. High-frequency vibrations arise in the bogie and car body related to the track arrangement and wheel out-of-roundness, causing the ride comfort to worsen significantly. Additionally, the system vibration characteristics are strongly dependent on the atmospheric temperature. Summaries and conclusions are obtained regarding the wheel wear and related vehicle dynamics of high-speed trains over long operating times and distances.     

柴油机SCR系统控制策略研究与软件设计

为有效地降低柴油机排气污染物NO_x,结合模块化设计思想,在Matlab/Simulink环境下完成SCR控制软件的开发。软件主要包括数据管理模块、SCR状态模块、尿素量计算模块和任务模块,其中尿素量计算模块采用基本尿素喷射量计算、尿素量修正和闭环反馈调节的组合方式提高尿素量计算精度。软件经代码生成后刷写至SCR控制器DCU中,在试验台架上完成ESC和WHTC循环测试。试验结果表明:在ESC和WHTC试验循环下,NO_x转换效率分别高于79.09%和72.35%,经催化还原后排放值分别低于1.836g/(kW·h)和2.147g/(kW·h),满足国Ⅴ法规的限值要求。     

软土刀具的磨损预测——一种研究刀具磨损系统中主要影响因素的新方法

硬岩隧道掘进机的性能很大程度上取决于其切削刀具的磨损情况。刀具的磨损会降低掘进速度,进而导致掘进时间延长、项目成本增加。通常在隧道项目的规划阶段使用预测模型来进行磨损预测,而常规的磨损试验对磨损系统的考虑还不够准确,并没有考虑到刀具/土体的相互作用、周围介质（水、膨润土）以及掘进过程中的荷载等因素。针对该问题,专门设计了一个水平放置的磨损试验设备。本文介绍了该试验方法,研究并讨论了磨损系统相关因素对磨损率的影响。结果表明,该设备可模拟真实的掘进过程,很好地解决了上述问题,达到了高效、准确预测磨损的效果。     

Effects of Residual Ash on Dpf Capture and Regeneration

To study the effects of residual ash on the capture and regeneration of a diesel particulate filter (DPF), repeated capture and complete regeneration experiments were conducted. An engine exhaust particulate sizer was used to measure the particle size distribution of diesel in the front and back of DPF. Discrepancies in the size distribution of the particulate matter in repeated trapping tests were analyzed. To achieve complete DPF regeneration, a DPF regeneration system using nonthermal plasma technology was established. The regeneration carbon removal mass and peak temperatures of DPF internal measuring points were monitored to evaluate the effect of regeneration. The mechanism explaining the influence of residual ash on DPF capture and regeneration was thoroughly investigated. Results indicate that the DPF trapping efficiencies of the nuclear-mode particles and ultrafine particles have significant improvements with the increase quantity of residual ash, from 90 % and 96.01 % to 94.17 % and 97.27 %, respectively. The exhaust backpressure of the DPF rises from 9.41 kPa to 11.24 kPa. Heat transfer in the DPF is improved with ash, and the peak temperatures of the measuring points accordingly increase. By comparing the regeneration trials, the elapsed time for complete regeneration and time difference for reaching the peak temperature between adjacent reaction interfaces are extended with increased quantity of ash. The carbon removal mass rises by 34.00 %.     

共轨柴油机燃烧纯生物柴油的试验研究

对一台国产涡轮增压直喷柴油机燃烧0#柴油和纯生物柴油的动力性、燃油经济性和排放性能进行对比试验研究。试验结果表明,在柴油机不进行任何调整的情况下,燃烧纯生物柴油会降低其动力性和燃油经济性,但可大幅度改善CO、HC和PM的排放性能。     

某款纯电动客车系统匹配和方案设计

结合某款纯电动客车的研发与应用,介绍纯电动系统的匹配设计和整车CAN网络架构,并提出合理的纯电动系统高压配电管理方案。     

车辆制动衰退性能分析

本文对轻型载货车下长坡制动过程进行研究与分析,通过理论计算和试验数据,得到车辆连接下长坡过程中,随温度升高,制动器制动力矩产生温度衰退,最高可达到15%到20%。同时随着制动次数的增加,真空伺服系统产生真空衰退,引起整车的制动性能衰退达到25%左右。两者相加整车的制动性能达到40%左右。最后提出对于山区轻型载货车加装排气辅助制动系统及提升真空泵的抽真空性能来补偿整车制动性能的衰退。     

基于山区复杂路段下的车辆主动限速控制系统研究

山区复杂路段交通事故频发,行车安全问题亟待解决,因此研究该路段下的主动限速控制技术具有重要意义。本文阐述了主动限速控制系统的原理与构成,并且对车辆的运行安全车速进行了分析与建模,提出了主动限速的控制策略。最后通过对该系统软硬件进行了调试,初步验证了其可行性比较合理,能够指导驾驶人的行车安全。     

论一种雨刮灯光控制器的开发及应用

为满足市场需求,优化产品性能,在已有雨刮间歇控制器基础上开发一种雨刮灯光控制器。本文主要阐述了控制器的原理及功能,其在某轻型卡车上的应用提高了整车电器可靠性及安全性。     

基于交通污染控制的多车型发展问题研究

针对汽车车型种类日益繁多,交通污染日益严重的问题,目前划分车型的依据多而杂。文中从汽车能源的角度划分车型,提出根据控制车型的拥有量来控制二氧化碳的排放,并建立模型计算碳排放量。从能源与环保角度,提出发展新型能源汽车,尤其是纯电动汽车,是必然的趋势,并给出了控制多车型发展的建议。