Identifying factors influencing the slow market diffusion of electric vehicles in Korea

Transportation - Electric vehicles (EVs) are considered as a driving force behind the automotive industry’s transformation based on eco-friendliness and high energy efficiency. Unlike...     

船用液控蝶阀节流调速系统的数字仿真(英文)

Hydraulic butterfly valves have been widely applied in marine engineering because of their large switching torque, low pressure loss and suitability for large and medium diameter pipelines. Due to control problems resulting from switching angular speeds of the hydraulic butterfly valve, a throttle-governing control mode has been widely adopted, and detailed analysis has been carried out worldwide on the structural principle concerning speed-regulation and the load torque on the shaft while opening or closing a hydraulic butterfly valve. However relevant reports have yet been published on the change law, the error and the influencing factors of the rotational angular velocity of the hydraulic butterfly valve while opening and closing. In this article, research was based on some common specifications of a hydraulic butterfly valve with a symmetrical valve flap existing in a marine environment. The throttle governing system supplied by the accumulator to achieve the switching of the hydraulic control valve was adopted, and the mathematical models of the system were established in the actual conditions while the numerical simulations took place. The simulation results and analysis show that the rotational angular velocity and the error of the hydraulic butterfly valve while switching is influenced greatly by the drainage amount of the accumulator, resulting in pressure loss in the pipeline, the temperature of hydraulic medium and the load of the hydraulic butterfly valve. The simulation results and analysis provide a theoretical basis for the choice of the total capacity of the accumulator and pipeline diameters in a throttle governing system with a hydraulic butterfly valve. It also determines the type and specification of the hydraulic butterfly valve and the design of motion parameters of the transported fluid.     

The two-dimensional study of the interaction between liquid loshing and elastic structures

Sloshing phenomenon in the liquid cargo carriers has caught the attention of researchers as the interaction between the sloshing waves and structure is one of the key point and difficulty in the study of sloshing. In this paper, we captured the free surface with a volume of fluid (VOF) method and then calculated the motions and responses of the structure by adopting the Reynolds-averaged Navier-Stokes (RANS) equations for the whole fluid domain. With the use of user defined functions (UDF) in Fluent, the interaction between fluid and structure was then simulated. As a reasonable simplification, the authors studied the response of a single cantilever in a tank under sloshing loads; Further study should pay more attention to the mechanisms of interaction between sloshing waves and elastic structures.     

Research of scalability of the belt-type sensor networks

For the large-scale application requirements of the belt-type networks, the mathematical modeling as well as quantitative analysis for the scalability of the network based on average path length is completed in this paper, and the theorem for the scale scalability of the belt-type networks is derived. The theorem provides a calculation formula for the upper limit of node scale theory of the belt-type networks and a calculation formula for the upper limit of single node load theory.     

Robust design optimization of suspension system considering steering pull reduction

This paper presents robust design optimization method to reduce steering pull phenomenon. One of the biggest causes of steering pull phenomenon is tolerance of suspension system such as hard point, spring, damper and bush. Therefore, the relationship between suspension systems and steering pull phenomenon has as nonlinear characteristics. But, it can be very difficult to evaluate the analytical design sensitivity. Thus, it is impossible to directly apply a well-developed optimization algorithm based on gradient information. To avoid these difficulty, this study uses sequential approximation optimization process based on a meta-model. The robust design process has 28 random design variables with tolerance. For efficient design process, the sample variances for the design goals are approximated from meta-models. The proposed approach required only 62 evaluations until it converged. Optimal design reduced the drift by 80% and its deviation by 38.7%, respectively. This result proves that the suggested design method of suspension system is effective and useful.     

Cooling performance of 25 kW in-wheel motor for electric vehicles

The in-wheel motor used in electric vehicles was designed and constructed for an electric direct-drive traction system. It is difficult to connect cooling water piping to the in-wheel motor because the in-wheel motor is located within the wheel structure. In the air cooling structure for the in-wheel motor, an outer surface on the housing is provided with cooling grooves to increase the heat transfer area. In this study, we carried out the analysis on the fluid flow and thermal characteristics of the in-wheel motor for various motor speeds and heat generations. In order to resolve heat release, the analysis has been performed using conjugate heat transfer (conduction and convection). As a result, flow fields and temperature distribution inside the in-wheel motor were obtained for base speed condition (1250 rpm) and maximum speed condition (5000 rpm). The thermo-flow analysis of the in-wheel motor for vehicles was performed in consideration of ram air effect. Also, in order to improve cooling effect of the motor, we variously changed geometries of housing. Therefore, we confirmed the feasibility of the air cooling for the motors of 25 kW capacity with housing geometry having cooling grooves and investigated the cooling performance enhancement. We found that the cooling effect was most excellent, in case that cooling groove direction was same with air flow direction and arranged densely.     

Angular position error detection of variable reluctance resolver using simulation-based approach

The variable reluctance type resolver is widely used in an electric motor for hybrid electric vehicles as a rotor position sensor. The purpose of this paper is to present a simulation-based approach capable of determining a more accurate rotor shape of variable reluctance resolver in order to cut the time and cost of its development before testing a physical prototype. For the verification of the simulation-based approach to the position error detection of rotor, experiments for 8XVR resolver were conducted. Based on this approach, an optimal salient-pole rotor shape of 4X-VR resolver is proposed.     

Research of order allocation model based on cloud and hybrid genetic algorithm under ecommerce environment

For massive order allocation problem of the third party logistics (TPL) in ecommerce, this paper proposes a general order allocation model based on cloud architecture and hybrid genetic algorithm (GA), implementing cloud deployable MapReduce (MR) code to parallelize allocation process, using heuristic rule to fix illegal chromosome during encoding process and adopting mixed integer programming (MIP) as fitness function to guarantee rationality of chromosome fitness. The simulation experiment shows that in mass processing of orders, the model performance in a multi-server cluster environment is remarkable superior to that in stand-alone environment. This model can be directly applied to cloud based logistics information platform (LIP) in near future, implementing fast auto-allocation for massive concurrent orders, with great application value.