Influence of the slice position on chloride migration tests for concrete in marine conditions

Chloride migration tests are used to measure the concrete capacity to inhibit chloride attack. Many researchers carry out this test in a slice of concrete extracted from the central part of cylindrical specimens, discarding about 75% of the concrete used to mold the specimens. This fact generated the question: would it be possible to extract more slices from a same specimen without losing the confidence in the results? The main purpose of this work is to answer this question. Moreover, another aim of this study was to show the difference of chloride penetration between finished faces and the formwork surfaces of concrete beams and slabs. The results indicated that it is possible to use more slices of a single specimen for a chloride migration test. Moreover, it was demonstrated that there is a significant difference of chloride penetration between the finished surface and the formwork surface of the specimens.     

Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Innovative strategies for urban car-sharing systems and a simulator to assess their performance

In this paper, three innovative car-sharing systems for urban areas are proposed, based on fleets of individual intelligent vehicles with three service characteristics: instant access, open-ended reservations and one-way trips. These features provide high flexibility but create an uneven distribution of vehicles among stations. Therefore, relocation of vehicles must be performed. Three different system procedures are proposed: in the first system, relocations are performed by users; in the other two, vehicles relocate automatically, thanks to their automation. In the first two systems, vehicles are accessible only at stations, whereas in the third they are also accessible along roads. In order to provide transport managers with a tool to test systems in different realities, an object-oriented simulator is developed. The simulation provides outputs of system performance, in terms of user waiting times and system efficiency. The proposed systems are simulated for the city of Genoa, in Italy, and a comparative analysis is presented.     

The determinants of long distance travel in Great Britain

This study analyses of the determinants of long distance travel in Great Britain using data from the 1995-2006 National Travel Surveys (NTSs). The main objective is to determine the effects of socio-economic, demographic and geographic factors on long distance travel. The estimated models express the distance travelled for long distance journeys as a function of income, gender, age, employment status, household characteristics, area of residence, size of municipality, type of residence and length of time living in the area. A time trend is also included to capture common changes in long distance travel over time not included in the explanatory variables. Separate models are estimated for total travel, travel by each of four modes (car, rail, coach and air), travel by five purposes (business, commuting, leisure, holiday and visiting friends and relatives (VFRs)) and two journey lengths (<150 miles and 150+ miles one way), as well as the 35 mode-purpose-distance combinations.The results show that long distance travel is strongly related to income: air is most income-elastic, followed by rail, car and finally coach. This is the case for most journey purposes and distance bands. Notable is the substantial difference in income elasticities for rail for business/commuting as opposed to holiday/leisure/VFR. In addition, the income elasticity for coach travel is very low, and zero for the majority of purpose-distance bands, suggesting coach travel to be an inferior mode in comparison to car, rail and air. Regarding journey distance, we find that longer distance journeys are more income elastic than shorter journeys.For total long distance travel, the study indicates that women travel less than men, the elderly less than younger people, the employed and students more than others, those in one adult households more than those in larger households and those in households with children less than those without. Long distance travel is also lowest for individuals living in London and greatest for those in the South West, and increases as the size of the municipality declines.     

Modelling and control of a new differential steering concept

This paper presents a new steer-by-wire concept using an all-wheel drive vehicle layout with in-wheel motors while completely omitting the application of any dedicated steering device. Steering is based on the so-called differential steering principle which generates the necessary steering moment about the kingpins by a traction force difference between left and right sides of the vehicle. In order to investigate the behaviour of the vehicle and to design the underlying control algorithms, a planar vehicle model is presented, where the vehicle is described as constrained non-holonomic system requiring a special treatment. A state feedback linear controller for controlling of the lateral dynamics of the vehicle at higher speeds and a simple PI angle controller for low-speed manoeuvring are developed. The resulting behaviour of the system is investigated by various simulation experiments demonstrating a comparable steering performance of the new steering concept as that of conventional passenger cars.     

Crew resource management training in the maritime industry: a literature review

The study is based on a literature review of recent empirical research on crew resource management (CRM) training in the maritime industry, organised around what non-technical skills to learn and how. The review indicates that existing work is dominated by individualistic theories of learning with less focus on learning as a social process. Five main categories of skills that need to be trained are identified: assertiveness, decision-making, communication, situation awareness and team coordination. We argue that it is necessary to operationalise these broad concepts further, emphasising the work context and crew-specific needs. The review also shows that a combination of classroom lectures and simulator-based exercises is commonly used in maritime education and training in these skills. The learning effect seems to be suffering from training programmes that are exported ‘as is’ from aviation and not adjusted to the maritime domain or to operation-specific needs. This paper examines maritime crew resource management training from a social learning perspective, involving the view that learning is a context bound, social process that might take place in communities of practice (CoP). A CoP is a group (e.g. a crew) wherein members share an activity and learn from each other. It is argued that CRM training programmes will benefit from including a social learning perspective. Factors that enable the assessment of teams are discussed, and it is argued that the training should be tailored to existing crews, emphasising a learning environment as close to reality as possible.     

荷坳隧道四洞小净距段支护结构设计研究北大核心CSCD

多洞空间小净距隧道支护结构参数量化设计与安全性分析是当前设计中的一大难题。文章针对深圳机荷高速公路荷坳隧道四洞小净距段的设计,采用总安全系数法对四洞的开挖与支护模式、各洞的开挖顺序及支护参数进行了研究比较,并采用隧规荷载-结构法、增量法、地层-结构法对支护结构的安全系数进行了对比计算,得出以下结论:(1)提出了基于总安全系数法原理的多洞空间小净距隧道设计方法;(2)根据总安全系数法得出了荷坳隧道四洞小净距段应采用“先行洞二次衬砌完成后再开挖下一孔隧道”的开挖与支护模式,且应按洞1→洞2→洞3→洞4的开挖顺序施工;(3)隧规荷载-结构法、增量法、地层-结构法虽无法得出结构的总承载安全系数,但在一定程度上可以反应部分支护结构的安全性。     

Mathematical model for optimising the sequence for clearing snow from the manoeuvring area during winter operations

This article considers the optimisation of the sequence for clearing snow from stretches of the manoeuvring area of an airport. This issue involves the optimisation of limited resources to remove snow from taxiways and runways thereby leaving them in an acceptable condition for operating aircraft. The airfield is divided into subsets of significant stretches for the purpose of operations and target times are established during which these are open to aircraft traffic. The document contains several mathematical models each with different functions, such as the end time of the process, the sum of the end times of each stretch and gap between the estimated and the real end times. During this process, we introduce different operating restrictions on partial fulfilment of the operational targets as applied to zones of special interest, or relating to the operation of the snow‐clearing machines. The problem is solved by optimisation based on linear programming. The article gives the results of the computational tests carried out on five distinct models of the manoeuvring area, which cover increasingly complex situations and larger areas. The mathematical model is particularised for the case of the manoeuvring area of Adolfo Suarez Madrid—Barajas Airport. Copyright © 2016 John Wiley & Sons, Ltd.

Highlights
• Optimal sequence for clearing snow from the manoeuvring area of an airport.
• Contains optimising algorithms solved using CPLEX LP‐based tree search.
• Restrictions on partial fulfilment of operational targets applied to subsets of significant stretches, used for planning the operation of snow‐clearing machines.
• Model applied to the case of the manoeuvring area of Adolfo Suárez Madrid Barajas Airport.
• Conclusions are given on the results of the computational tests carried out. There are five models of the manoeuvring area which cover increasingly complex situations and larger areas.

     

The accuracy of proxy responses in a stated choice setting: A re-examination and some controversial conclusions

Data is typically gathered from an individual respondent who represents the group or the household. This individual is often identified as the “primary decision maker” and is asked to provide responses as a proxy for the group given that the cost of interviewing each member individually is impractical and/or expensive. The collection of joint preferences is rarely undertaken, with the use of proxy responses not uncommon in travel behaviour research. Under such a framework, there exists an assumption that the primary decision maker has perfect knowledge of other group member preferences, and bargaining behaviour, and is able to synthesise this information when providing a response on their behalf. The validity of such an assumption however remains an open question, with recent research calling the reliability of proxy responses into account (Bateman and Munro, 2009). In this paper, using three models estimated in willingness to pay space, we examine the accuracy of proxy responses in a stated choice experiment. We find that there is overlap between a proxy response and the own preferences of the individual providing the proxy choice, but while the proxy responses fail to represent the full preference heterogeneity that exists in the actual choices made by individuals, the proxy responses in aggregate provide a suitable replacement for actual data, subject to a number of caveats.