The potential for real-time passenger information as part of an integrated bus-control/information system

This paper is concerned with the effect of linking innovative bus-control systems with real-time passenger information, with the overall aim of improving conditions for bus operation and passengers in central urban corridors. The first section presents a concise review of bus passenger information systems (particularly their application at bus stops). Then the concept of real-time passenger information is explored. The case for and against real-time information is argued and two British case-studies follow. In the second section it is argued that the provision of real-time information, as part of an integrated bus-control/information system, offers new possibilities for meeting the identified needs of public transport users. Finally, in the third section, some comments are made on the evaluation of different combinations of bus-control and passenger information tested using a simulation method and a series of subjective response surveys. General relationships governing the degree of bus-control required and the extent of information needed are of special interest.     

Environmental trends of ports and harbours: Implications for planning and management

The traditional view of ports as evolving from human settlements to distribution centres is re-examined in an ecological context. The discussion is essential because of the persisting traditional approach to 'global' port development, i.e. directed primarily by technological optimization related to cargo transfer and ocean trasportation. Growing environmental concerns and realities indicate the need for a broader environmental view in which the port is recognized as part of a larger interactive coastal ecosystem, with environmental pressures by the port on the surrounding environment, as well as by the environment on the port. The paper argues for an ecological basis for coastal port development, analyses the environment implications of riverine linkages between port and hinterland, and details some environmental consequnces of changing industrialization and chemical practices. It also identifies initiatives for relevant planning and future port management.     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

Economic Valuation of Coastal and Marine Resources: Bohol Marine Triangle,Philippines

This article provides results on the net benefits generated from the natural resources in the Bohol Marine Triangle (BMT) in the Philippines. The BMT spans over 112,000 ha and its coastal ecosystems are rich in biodiversity and provide economic opportunities to the coastal communities. With a 10% discount rate, the accumulated total net benefits for the BMT resources over a 10-year period is US$11.54 million. Tourism and the municipal fisheries are the most important direct use values of the coastal and marine resources of the BMT accounting for 44% and 39% of the total net benefits. Annual revenues attributed to ecosystems were as follows: coral reefs, US$1.26 million; beach/intertidal area, US$1.12 million; marine waters, US$646,501; mangrove, US$239,561; and seagrass, US$105,990. The large market values indicate the dependence of the local community on the BMT coastal and marine resources. In the same way, non-market values show the important life-support functions of coastal and marine ecosystems. The net benefits reflect the magnitude of potential losses due to improper management of coastal and marine resources in the BMT. This valuation highlights the importance of the coastal services to the BMT economy and draws attention to the benefits the local stakeholders derive from BMT coastal resources. Policy measures can now take into account these values to justify a sufficient investment in coastal management efforts to sustain the flow of coastal services in the interest of current and future generations.     

北美铁路降低轮轨接触应力新进展

介绍了北美铁路在降低轮轨接触应力和轮轨作用力方面的研究成果.     

The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.     

Modelling travellers’ risky choice in a revealed preference context: a comparison of EUT and non-EUT approaches

Recent work on risky choice modelling has sought to address the shortcomings of expected utility theory (EUT) by using non-expected utility theoretic (non-EUT) approaches. However, to date these approaches have been merely tested on stated choice data which is flexible and cheap. In this study, we empirically investigate the feasibility and validity of non-EUT approaches in a revealed preference (RP) context in which travel time distribution is extracted from observed historical travel time data, and subsequently present systematic comparisons between EUT, weighted utility theory, rank-dependent expected utility theory, and prospect theory (PT). The empirical evidence indicates that each non-EUT model has important behavioural insights to offer, moreover, EUT as well as non-EUT models can be applied to the RP context. However, the EUT and non-EUT model fits are generally similar with only PT providing a marginally improved model fit over EUT. The key findings presented in this study reinforce the importance of exploring non-EUT models within a revealed preference context before they can be applied reliably to modelling risky choices in the real world.     

Fuzzy-logic-based incident detection for signalized diamond interchanges

This paper documents a fuzzy-logic-based incident detection algorithm for signalized urban diamond interchanges. The model is capable of detecting lane-blocking incidents whose effects are manifested by patterns of deterioration in traffic conditions that require adjustments in signal control strategies. As a component of a real-time traffic adaptive control system for signalized diamond interchanges, the algorithm feeds an incident report (i.e., the time, location, and severity of the incident) to the system's optimization manager, which uses that information to determine the appropriate signal control strategy.The performance of the model was studied using a simulation of an actual diamond interchange. The simulation study evaluated the model's performance in terms of detection rate, false alarm rate, and mean time to detect. The model's performance was encouraging, and the fuzzy-logic-based approach is considered promising.     

Safety modeling for two‐way left‐turn lanes and a procedure to identify two‐way left‐turn lane segments with safety concerns

In the past, two‐way left‐turn lane (TWLTL) median treatments have been frequently used in Florida to inexpensively improve traffic and safety performances. In order to identify factors that may have significant impacts on safety operations in TWLTL sections and to identify TWLTL locations that present existing and future safety concerns, a research project was carried out and results are summarized in the paper. In the research, a three‐year crash history database with crashes and section characteristics from a total of 1688 TWLTL sections all over Florida was developed and used. A negative binomial regression model was developed to determine the statistical relationship between the number of crashes per mile per year and several variables such as traffic volume, access density, posted speed, and number of lanes. In regard to the methodology, in order to identify locations with safety concerns, several steps are needed: development of real crash data distribution, determination of statistical distribution models that better represent the actual crash data, determination of percentile values for the average number of crashes, estimation of crash rates for sections with the same characteristics, estimation of critical values for the variables corresponding to the percentile values for average number of crashes, calculation of tables of critical average annual daily traffic values, and generation of a list of TWLTL locations with critical safety concerns. Results presented in the paper have been used in real applications. Copyright © 2012 John Wiley & Sons, Ltd.     

An exact modelling of the uniform control traffic delay in undersaturated signalized intersections

The average delay experienced by vehicles at a signalized intersection defines the level of service (LOS) at which the intersection operates. A major challenge in this regard is the ability to accurately estimate all the components underlying the overall control delay, including the uniform, incremental and initial queue delays. This paper tackles this challenging task by proposing a novel exact model of the uniform control delay component with a view to enhancing the accuracy of the existing approximate models, notably, the one reported in the Highway Capacity Manual 2010. Both graphical and analytical proofs are employed to derive exact closed‐form expressions for the uniform control delay at undersaturated signalized intersections. The high degree of accuracy of the proposed models is analysed through extensive simulations to demonstrate their abilities to exactly characterize the performance of real‐life intersections in terms of the resulting vehicle delay. Unlike the existing widely adopted uniform delay models, which tend to overestimate the LOS of real‐life intersections, the delay models introduced in this paper have the merit of exactly capturing such a LOS. Copyright © 2016 John Wiley & Sons, Ltd.