Biologically induced differences in erodibility and aggregation of subtidal and intertidal sediments: a possible cause for seasonal changes in sediment deposition

This study was carried out to describe the difference in erodibility and aggregation in a tidal basin including both subtidal and intertidal study sites and to use these results to explain the shifting erosion/deposition cycles at the sites. Erosion thresholds, erosion rates and settling velocities of the eroded material were measured at a mudflat transect and at sediment cores taken from a nearby tidal channel during surveys made in May 2000 and March 2002. Surface samples were analysed for grain-size, chl. a content, faecal pellet content, dry bulk density and organic content. Additionally, surface samples were taken at eight occasions in the period January 2002 to May 2003 from shallow tidal channels in the area. These samples were analysed for mud content and showed that major shifts in sediment distribution occurred in the period. The erodibility of the mudflat was generally high due to pelletization by the mudsnail Hydrobia ulvae but close to the salt marsh much lower erodibility was found, probably due to stabilisation by microphytobenthos. In contrast, the erodibility of the channel bed seemed to be very little influenced by biological activity and the relatively low erodibility found here was caused by physical characteristics of the sediment. The sediment eroded from the mudflat was generally strongly pelletized and showed high settling velocities whereas less aggregation and lower settling velocities were found for the channel bed sediments. Temporal variations of the mudflat stability and hydrodynamics resulted in temporal variations of deposition and erosion and the changing stability at the mudflat is likely to be one of the main reasons for a general transport of fine-grained sediment from the mudflat to the channel in the cold seasons and vice versa during the rest of the year.     

Toward regional transportation governance: a case study of Greater Vancouver

This paper discusses the evolving institutional structure and governance of transportation planning, policy development and transit delivery within one major North American city-region, the Greater Vancouver area. Various methods of transportation governance are explored from complete independence to full regional integration. The move away from a direct provincial role in transportation management to a greater regional transit authority is discussed and critiqued. This revised version was published online in June 2006 with corrections to the Cover Date.     

Torque characteristics analysis for optimal design of a copper-layered eddy current brake system

An enhanced parametric model for a copper-layered eddy current electric machine (retarder) is introduced in this paper. The modeled torque characteristics of the copper-layered electromagnetic retarders are based on the results from a detailed electromagnetic finite element analysis (FEA) of these eddy current machines. The model uses a parameterized double-exponential function to model the steady state speed-torque characteristics of the retarder. The parameters are adjusted for optimal braking performance in conjunction with predicted speed-torque characteristics of a copper-layered retarder. A full vehicle model, along with the proposed retarder speed-torque model has been used to simulate a series braking events. The simulation results show that the peaks of the retarder speed-torque curves must be designed to occur within a specific range of speeds for optimal braking performance.     

The need for a structured policy towards reducing human-factor errors in marine accidents

The paper questions why so little attention has been given to the primary control centre of a merchant ship, namely the bridge, when so many accidents at sea are caused by ‘human error’. The paper then suggests that there is a need for a policy which will draw the various threads of the problem together in a form suitable for international discussion and even legislation. The identified areas are those of training, bridge design, psychology and marine traffic discipline.     

电流变流体的润滑性能研究

提出了电流变流体作为润滑剂使用的新设想，研究了电流变流体粘度的可控特性，通过试验获得了电流变流体摩擦力随电场强度、悬浮颗粒浓度、油膜厚度等因素的变化规律，为深入研究电流变流体的润滑特性奠定了基础。     

Response-based extreme value analysis of moored offshore structures due to wave, wind, and current

Floating moored offshore structures have a significant future in offshore operations as an attractive economic alternative to fixed structures in deep waters and/or in areas where there is no existing infrastructure. This paper describes an analysis procedure based on the structure variable approach to estimate load and response values of a moored offshore platform at a given return period by taking into account the joint occurrence of wave, wind, and current. The results show that the most severe mooring loads may not occur when wind, wave, and current are collinear and are at their maximum design values, i.e., the 50- or 100-year case. It is recommended that the extreme mooring design loads for moored offshore systems should be determined through a range of physical or numerical simulations where wave, wind, and current are noncollinear and act with less severe magnitudes than the 50- or 100-year case. This recommendation has also been adopted in the ITTC/Ocean Engineering Committee recommendations to the ITTC Conference held in September 1996.     

Role of filtering and biodeposition by Adamussium colbecki in circulation of organic matter in Terra Nova Bay (Ross Sea, Antarctica)

At Terra Nova Bay, the scallop Adamussium colbecki (Smith, 1902) characterises the soft and hard bottoms from 20 to 80 m depth, constituting large beds and reaching high values of density (50–60 individuals/m²) and biomass (120 g/m² DW soft tissues). To assess its role in the organic matter recycling in the coastal ecosystem, its filtering and biodeposition rates were evaluated in laboratory experiments during the austral summer 1993/94. Filtration rates, measured in a flow-through system, were calculated from the difference in particulate organic carbon (POC), nitrogen (PON) and chlorophyll-a (Chl-a) concentration in inflow and outflow water. Experiments were performed using natural sea water with POC, PON and Chl-a concentrations of about 450 μg/l, 90 μg/l and 2 μg/l, respectively. The biodeposition rate and the biochemical composition of the biodeposits were studied in order to detect how the organic matter is transformed through feeding activity of A. colbecki. At +1°C temperature, the average filtering rate was about 1 l h⁻¹ g⁻¹ (DW soft tissues) in specimens ranging in body mass from 2 to 3 g (DW soft tissues) and 6–7 cm long. The biodeposition rate in 3–8 cm long specimens, ranging from 0.4 to 5.7 g (DW soft tissues), was about 5.65 mg DW/g DW/day, leading to an estimate of Corg flux, through biodeposition by A. colbecki, of about 21 mg C m⁻² day⁻¹ at in situ conditions. Comparison between the biochemical composition of seston and biodeposits shows a decrease of the labile compounds, of the Chl-a/phaeopigments ratio in the biodeposits. The recorded C/N ratio decrease suggests a microbial colonisation in the biodeposits. This study suggests that Adamussium colbecki plays an important role in coupling the material fluxes from the water column to the sea bed, processing about 14% of total Carbon flux from the water column to the sediments, with an assimilation efficiency of 36%.     

Choice of parking: Stated preference approach

Over recent years, parking policy has become a key element of transport policy in many countries. Parking policy measures can affect many different dimensions of travel behaviour but are likely to be most significant in terms of travellers' choice of parking type and location. This dimension of travel choice has, to date, received comparatively little attention, yet is of vital importance if we are to properly understand and predict the effects of parking policy measures.This paper presents two studies addressing this issue carried out in the United Kingdom and Germany. Both studies used a stated preference approach in order to collect disaggregate data on travellers responses to changes in parking attributes and used these data to build simple logit models of parking type choice. The studies were designed in order to allow comparable choice models to be estimated from the two datasets. The results obtained strongly indicate the need to separately identify the costs associated with different components of the parking activity (e.g., general in-vehicle time, parking search time, egress time) and also point to the existence of significant differences in the relative valuation of these components across different journey purposes. Where possible, the results of the choice modelling exercises are also compared with existing revealed and stated preference results and are found to be generally in line with prior expectations.     

Rigid moorings in shallow water: A wave power application. Part I: Experimental verification of methods

Experimental work carried out at 1:60 scale in a wave flume assessed the pitch motion and anchor loading of 3 articulated tower installations in 50 m water depth while being exposed to north Atlantic storms with H_s of 15.2 m and T_p of 18.4 s. The three installations differ only in that their mass and buoyancy characteristics provide a natural period in pitch at equilibrium of 13 s, 20 s and 34 s respectively. It is verified that the dominant behaviour can be simulated by a relatively simple mathematical model, allowing the critical parameters of peak anchor loads and pitch angles to be calculated and extrapolated to full scale. It is demonstrated from the experimental and simulation results that the mass characteristics of a non surface piercing tower can be used to offset some of the challenges of moving to shallow water. If done correctly, it is possible to keep horizontal anchor loads under control and reduce vortex-induced transverse loading at the expense of increased pitch motions. Overall, the use of articulated tower installations in water depths of 50 m would appear to be technically feasible, even in exposed areas. The limitations on the size of such structures and the consequences of the resulting pitch accelerations and induced anchor loads are the subject of further study. It is proposed that the model verified herein can be used to further assess their potential at delivering viable wave power position mooring systems.     

Prospects for plug-in hybrid electric vehicles in the United States and Japan: A general equilibrium analysis

The plug-in hybrid electric vehicle (PHEV) may offer a potential near term, low-carbon alternative to today’s gasoline- and diesel-powered vehicles. A representative vehicle technology that runs on electricity in addition to conventional fuels was introduced into the MIT Emissions Prediction and Policy Analysis (EPPA) model as a perfect substitute for internal combustion engine (ICE-only) vehicles in two likely early-adopting markets, the United States and Japan. We investigate the effect of relative vehicle cost and all-electric range on the timing of PHEV market entry in the presence and absence of an advanced cellulosic biofuels technology and a strong (450 ppm) economy-wide carbon constraint. Vehicle cost could be a significant barrier to PHEV entry unless fairly aggressive goals for reducing battery costs are met. If a low-cost PHEV is available we find that its adoption has the potential to reduce CO₂ emissions, refined oil demand, and under a carbon policy the required CO₂ price in both the United States and Japan. The emissions reduction potential of PHEV adoption depends on the carbon intensity of electric power generation. Thus, the technology is much more effective in reducing CO₂ emissions if adoption occurs under an economy-wide cap and trade system that also encourages low-carbon electricity generation.