Deep foundation pit excavation procedure optimization considering creep deformation on nearby metro tunnelEI北大核心

Research purposes: The existing researches about excavating procedures of deep foundation pit on nearby metro tunnel in soft formation are lack of systematicness, and creep characteristics of soft clay are not usually taken into consideration. This paper takes Qianhaiwan station of Metro Line 11 in Shengzhen as engineering background and considers creep characteristics in sludge formation. The influence of step excavation in the transversal, longitudinal and vertical directions on the deformation of foundation pit and nearby subway tunnel are simulated, which may be expected to provide theoretical basis for choosing foundation pit excavation procedure of Qianhaiwan station. Research conclusions: (1) The segment far away from tunnel should be excavated firstly when only transversal step excavation was undertaken along the horizontal direction of foundation pit. (2) The maximum horizontal displacement of the piles show exponential relations with the number of segments when step excavation of foundation pit was undertaken in vertical and transversal or longitudinal. If thickness of every step excavation was limited in 1.5~2 m, the horizontal displacement of the pile near tunnel can be reduced about 9 percent when there is no horizontal step excavation. (3) Transversal step excavation with segments far from tunnel excavated firstly was found to be the best step excavation method under the same condition of step number and support, and longitudinal and transversal step excavation followed while longitudinal step excavation was the last. (4) The research results have guiding significance for foundation pit of Qianhaiwan station and similar projects.     

Development of a low-noise cooling fan for an alternator using numerical and doe methods

An alternator, which converts mechanical rotational energy into electrical energy, is an important component of a vehicle. Alternators operate over a broad range of rotational speeds, typically from 3,000 RPM to 18,000 RPM, which demands a cooling fan producing sufficient airflow, ideally with a minimum of noise. In the current study, an optimized alternator-cooling fan was developed through a linked DOE(Design OF Experiment) process and numerical analysis. The SC/Tetra and FlowNoise S/W programs were used to calculate flow rates and noise levels, respectively, for the newly developed fan. Compared with original model, the numerical results predicted a 3 dBA noise reduction; the measured reduction was 4 dBA.     

Performance Index for a Preview Active Suspension Applied to a Quarter-Car Model

A simple and convenient matrix expression is derived for the performance index in the case of a linear vehicle model with two degrees of freedom and a preview active suspension, subject to a unit step road input and employing optimal control. The usual quadratic integral-type performance index is assumed and the effect of an additional form of constraint is described briefly. The effects of preview time on the performance index and the optimal feed-forward control are illustrated graphically for a particular example.     

Safety Evaluation for Freeway Exit Ramp Based on Speed Consistency

Speed differential has direct relationship with road safety. Conventional speed consistency measures draw sample data from independent population that follows a normal distribution. These methods may fall into ecological fallacy and overestimate the safety level of road elements. After deducing the relationship between the difference in operating speed ΔV₈₅ and85(ΔV), the 85^th percentile value of individual speed reduction, this paper recommends 85(ΔV) and speed reduction rate 85(ΔV)R is used to evaluate ramp safety. Point speeds of individual vehicle at freeway diverge area, upper ramp, and lower ramp are collected by radar guns. Safety performance of 37 exit ramps are appraised using three different measures, namely, ΔV₈₅, 85(ΔV), and 85(ΔV)R. The results show that 85(ΔV) is 1.42 to 2.02 times of ΔV₈₅, and that the evaluation result of 85(ΔV)R is between the other two. The measure 85(ΔV)R considers not only individual speed but also the base speed on upstream element, which avoid the pitfalls of ecological fallacy and overestimation possessed by conventional measures. It is a safer and reasonable measure that should be adopted in practice.     

Driver behavior formulation in intersection dilemma zones with phone use distraction via a logit-Bayesian network hybrid approach

Use of cellular phone while driving is one of the top contributing factors that induce traffic crashes, resulting in significant loss of life and property. A dilemma zone is a circumstance near signalized intersections where drivers hesitate when making decisions related to their driving behaviors. Therefore, the dilemma zone has been identified as an area with high crash potential. This article utilizes a logit-based Bayesian network (BN) hybrid approach to investigate drivers' decision patterns in a dilemma zone with phone use, based on experimental data from driving simulations from the National Advanced Driving Simulator (NADS). Using a logit regression model, five variables were found to be significant in predicting drivers' decisions in a dilemma zone with distractive phone tasks: older drivers (50–60 years old), yellow signal length, time to stop line, handheld phone tasks, and driver gender. The identified significant variables were then used to train a BN model to predict drivers' decisions at a dilemma zone and examine probabilistic impacts of these variables on drivers' decisions. The analysis results indicate that the trained BN model was effective in driver decision prediction and variable influence extraction. It was found that older drivers, a short yellow signal, a short time to stop line, nonhandheld phone tasks, and female drivers are factors that tend to result in drivers proceeding through intersections in a dilemma zone with phone use distraction. These research findings provide insight in understanding driver behavior patterns in a dilemma zone with distractive phone tasks.     

A tool to aid redesign of flexible transport services to increase efficiency in rural transport service provision

Rural areas generally have lower and more dispersed demands for travel which cannot sustain conventional public transport services and consequently have a greater number of flexible and demand responsive transport services operating. These services usually operate on a stand-alone basis, are often subsidized and are typically only accessible by certain passenger types or for specific trip purposes. This generally results in uncoordinated and inefficient transport provision overall. The Flexible integrated transport services (FITS) system featured in this paper has been designed to address this problem. FITS can be used as a planning tool to assess potential benefits from relaxing operating constraints (e.g., a service's operating boundaries), which can potentially suggest service redesign. It also includes the capacity to assign subsidy payments on a trip by trip basis to increase cost efficiency whilst meeting a greater proportion of transport needs. The case study in the paper focusses on transport to health in the Aberdeenshire and Morayshire areas of Scotland in the UK. Despite flexible transport operators receiving public funds to meet passenger needs, this is currently being supplemented by public bodies paying large amounts in taxi fares in instances where there is a statutory obligation to provide travel but where no other suitable transport service exists. The results demonstrate the potential substantial savings which could be realized by allowing transport operators to redesign their services by relaxing constraints and by the reassignment of subsidies: resulting in more passenger demands being met and a reduction in public spending on taxi fares.     

The delimitation of exclusive economic zones

In this paper Admiral Kapoor examines some of the problems relating to the delimitation of maritime boundaries, particularly that of exclusive economic zones, as they affect the hydrographic surveyor.     

Maritime education in cross cultural settings

Cross-cultural interaction is growing in our global economy. Expanding maritime trade in ports around the world reinforces the need for standardized training and education to cope with new global technologies and logistics systems. Working, studying and interacting in cross-cultural settings can lead to problems of misunderstandings and misinterpretations among people having different worldviews.     

An algorithm for oceanic front detection in chlorophyll and SST satellite imagery

An algorithm is described for oceanic front detection in chlorophyll (Chl) and sea surface temperature (SST) satellite imagery. The algorithm is based on a gradient approach: the main novelty is a shape-preserving, scale-sensitive, contextual median filter applied selectively and iteratively until convergence. This filter has been developed specifically for Chl since these fields have spatial patterns such as chlorophyll enhancement at thermohaline fronts and small- and meso-scale chlorophyll blooms that are not present in SST fields. Linear Chl enhancements and localized (point-wise) blooms are modeled as ridges and peaks respectively, whereas conventional fronts in Chl and SST fields are modeled as steps or ramps. Examples are presented of the algorithm performance using modeled (synthetic) images as well as synoptic Chl and SST imagery. After testing, the algorithm was used on > 6000 synoptic images, 1999–2007, to produce climatologies of Chl and SST fronts off the U.S. Northeast.     

Role of filtering and biodeposition by Adamussium colbecki in circulation of organic matter in Terra Nova Bay (Ross Sea, Antarctica)

At Terra Nova Bay, the scallop Adamussium colbecki (Smith, 1902) characterises the soft and hard bottoms from 20 to 80 m depth, constituting large beds and reaching high values of density (50–60 individuals/m²) and biomass (120 g/m² DW soft tissues). To assess its role in the organic matter recycling in the coastal ecosystem, its filtering and biodeposition rates were evaluated in laboratory experiments during the austral summer 1993/94. Filtration rates, measured in a flow-through system, were calculated from the difference in particulate organic carbon (POC), nitrogen (PON) and chlorophyll-a (Chl-a) concentration in inflow and outflow water. Experiments were performed using natural sea water with POC, PON and Chl-a concentrations of about 450 μg/l, 90 μg/l and 2 μg/l, respectively. The biodeposition rate and the biochemical composition of the biodeposits were studied in order to detect how the organic matter is transformed through feeding activity of A. colbecki. At +1°C temperature, the average filtering rate was about 1 l h⁻¹ g⁻¹ (DW soft tissues) in specimens ranging in body mass from 2 to 3 g (DW soft tissues) and 6–7 cm long. The biodeposition rate in 3–8 cm long specimens, ranging from 0.4 to 5.7 g (DW soft tissues), was about 5.65 mg DW/g DW/day, leading to an estimate of Corg flux, through biodeposition by A. colbecki, of about 21 mg C m⁻² day⁻¹ at in situ conditions. Comparison between the biochemical composition of seston and biodeposits shows a decrease of the labile compounds, of the Chl-a/phaeopigments ratio in the biodeposits. The recorded C/N ratio decrease suggests a microbial colonisation in the biodeposits. This study suggests that Adamussium colbecki plays an important role in coupling the material fluxes from the water column to the sea bed, processing about 14% of total Carbon flux from the water column to the sediments, with an assimilation efficiency of 36%.