Further evidence on the temporal stability of disaggregate travel demand models

Current evidence on the transferability of disaggregate travel demand models is inconclusive. Adding to this body of research, the present analysis focuses upon the temporal characteristics of work trip behavior in the San Francisco Bay Area. Using before and after data sets associated with the BART Impact Travel Study, multinomial logit models of work trip modal choice are estimated. The results indicate that the general form and the coefficient estimates of a pre BART model are transferable in time. Moreover, when updated to reflect BART's presence, the model's predictive success and its implied elasticity measures are generally accurate, relative to those implied by reestimating the entire model on post BART data. Finally, as economic theory would predict, elasticity measures of the service related variables were found to increase over time.     

The design of liner shipping serives: the problem of feeder services versus multi-port-calls

In this paper, the authors outline the structure of liner shipping systems with special emphasis on the question of whether feeder services are superior in economic terms to the more traditional and commonly-used multi-port-calling system. They describe the theoretical advantages of the former over the latter, and develop a model by which the optimal conditions both operate in may be determined. This model is then applied to a real situation to ascertain whether the theory works in practice. They conclude that the shuuttle/feeder system is worthwhile only in exceptional circumstances when specific route characteristics—low trade density; hinterland generated cargo; inland position of port; and heavy congestion—coexist. Despite the expense of multi-port-calling, it remains the most practical solution to the thin trade problem.     

Roll Dynamics of Commercial Vehicles

An analytical model is developed here for studying the roll dynamics of commercial vehicles. Large displacements and rotations are accounted for in this nonlinear model so that it can be used for the study of roll dynamics well beyond the limits of wheel lift-off. The model is used to illustrate some of the dynamic phenomena in vehicle rollover, especially the interactive coupling between the roll and the vertical modes of motion. The influence of suspension backlash on rollover resistance is demonstrated, and the phenomenon of roll motion resonance is illustrated to suggest new means for evaluating vehicle rollover sensitivity.     

Economic Valuation of Coastal and Marine Resources: Bohol Marine Triangle,Philippines

This article provides results on the net benefits generated from the natural resources in the Bohol Marine Triangle (BMT) in the Philippines. The BMT spans over 112,000 ha and its coastal ecosystems are rich in biodiversity and provide economic opportunities to the coastal communities. With a 10% discount rate, the accumulated total net benefits for the BMT resources over a 10-year period is US$11.54 million. Tourism and the municipal fisheries are the most important direct use values of the coastal and marine resources of the BMT accounting for 44% and 39% of the total net benefits. Annual revenues attributed to ecosystems were as follows: coral reefs, US$1.26 million; beach/intertidal area, US$1.12 million; marine waters, US$646,501; mangrove, US$239,561; and seagrass, US$105,990. The large market values indicate the dependence of the local community on the BMT coastal and marine resources. In the same way, non-market values show the important life-support functions of coastal and marine ecosystems. The net benefits reflect the magnitude of potential losses due to improper management of coastal and marine resources in the BMT. This valuation highlights the importance of the coastal services to the BMT economy and draws attention to the benefits the local stakeholders derive from BMT coastal resources. Policy measures can now take into account these values to justify a sufficient investment in coastal management efforts to sustain the flow of coastal services in the interest of current and future generations.     

Model-based analysis of the mechanical subsystem of an air brake system

Most commercial vehicles such as buses and trucks use an air brake system, often equipped with an S-cam drum brake, to reduce their speed and/or to stop. With a drum brake system, the clearance between the brake shoe/pad and the brake drum may increase because of various reasons such as wearing of the brake shoe and/or brake drum and drum expansion caused by high heat generation during the braking process. Hence, to ensure proper functioning of the brake system, it is essential that the clearance between the brake shoe and the brake drum is monitored. In this paper, we present a mathematical model for the mechanical subsystem of the air brake system that can be used to monitor this clearance. This mathematical model correlates the push rod stroke transients and the brake chamber pressure transients. A kinematic analysis and a dynamic analysis of the mechanical subsystem of the air brake system were performed, and the results are corroborated with experimental data.     

Benthic sediment composition and nutrient cycling in an Intermittently Closed and Open Lake Lagoon

Surfical sediments within Corunna Lake, a moderate size Intermittently Closed and Open Lake Lagoon (ICOLL), were examined for solid phase nutrient concentrations (TN, TP, TOC,) and solute exchange rates between the sediment and water column (O₂, NO₃–N, NH₄–N, FRP, and N₂). The surfical sediments in Corunna Lake contained high concentrations of TN (5 mg/g dry mass), total phosphorus (0.6 mg/g dry mass), and TOC (~ 5% dry mass). The carbon stable isotope ratio (δ¹³C) and TOC:TN ratios (δ¹³C ~ ? 24, TOC:TN ~ 11–14) demonstrated that the composition of the organic matter in the sediment was a mixture derived primarily of degraded planktonic matter. The close association between TP and Fe concentrations highlighted the potential role Fe plays in mediating Filterable Reactive Phosphorus (FRP) concentrations in the water column of Corunna Lake. In situ benthic chamber incubations were used to measure benthic fluxes. Solute exchange rates between the sediment and water column in Corunna Lake were similar to other reported studies (O₂ = ? 469 to ? 1765 µmol m^? 2 h^? 1, NH₄–N = 0.1–63 µmol m^? 2 h^? 1, NO₂/NO₃–N = 0 µmol m^? 2 h^? 1, FRP = ? 4–1.6 µmol m^? 2 h^? 1and N₂ = 12–356 µmol m^? 2 h^? 1). As more carbon was deposited and mineralized the efficiency of the bacterial population to denitrify nitrogen in the sediment decreases. The linkage between land use and benthic biogeochemistry was also explored. A dairy farm exists in the middle catchment of Corunna Lake, and the receiving bay sediment consistently demonstrated the highest oxygen consumption rates in winter and spring (? 1408 µmol m^? 2 h^? 1 in winter, ? 1691 µmol m^? 2 h^? 1 in spring) and lowest denitrification efficiencies during summer (~ 3%). Nitrate/nitrite fluxes were not observed during any of the chamber incubations, with the concentrations of nitrate/nitrite being below detection limits (< 10 μg/L). Seasonal changes influenced the rates of solute exchange between the sediment and water column. Critical measures of solute exchange for NH₄–N and biogenic N₂ indicated that seasonal temperature changes play a significant role in mediating the reaction rates of sedimentary based biogeochemical processes. Measurable FRP fluxes were small but greater in the benthic sediments which received higher carbon inputs. Sediments have a high capacity to adsorb P which is released as sediment oxygen demand increases as a result of increases in labile carbon loads.     

Cycle-simulation turbulence modelling of IC engines

Numerical simulations of IC engines are of high interest for automotive engineers worldwide. The simulation models should be as fast as possible, low-computational effort and predictive tool. The correct prediction of turbulence level inside the combustion chamber of spark ignition engines is the most important factor influencing to the engine working cycle. This paper presents a development of the k-ε turbulence model applied to the commercial cycle-simulation software with the high emphasis on the intake part. The validation was performed on two engine geometries with the variation of engine speed and load comparing the cycle-simulation results of the turbulent kinetic energy and in-cylinder temperature with 3-D CFD results. In order to apply the cycle-simulation turbulence model for the simulation of entire engine map, the parameterization model of turbulence constants was proposed. The parameterized turbulence model was optimized using NLPQL optimization algorithm where the single set of turbulence model parameters for each engine was found. A good agreement of the turbulent kinetic energy during the expansion was achieved when the turbulence affects the flame front propagation and combustion rate as well.     

Fast passenger ferries and their future

This papers examines the different choices of High Speed Craft (HSC) hull design available and briefly looks at the advantages and disadvantages of each hull form. The trends in various design aspects of HSC such as speed, capacity and size are studied. An investigation on the HSC development is conducted and the future of HSC in the UK is studied. A study onboard an HSC with the aim of trying to determine what passengers think of HSC and why they travel by them is also conducted. Finally, an analysis of the possible market for HSC is carried out.