Topology optimization of gas flow channel routes in an automotive fuel cell

An efficient topology optimization method for fluid-structure problems was developed in an effort to determine the optimum flow channel route in a fuel cell bipolar plate from first principles. This study describes the derivation and solution of new mathematical equations for topology optimization combining a density-based algorithm, the interpolation method of moving asymptotes (MMA), and the incompressible Navier-Stokes equation with a term representing the chemical reaction between hydrogen and the catalyst. The present method is based on the finite element method with a newly developed reaction rate equation. In this model, a topology variable of 0 represents viscous flow, whereas a value of 1 indicates porous flow. The flow velocity and pressure were obtained from the Navier-Stokes equation and constraints and element matrices for sensitivity analyses during the optimization. MMA was utilized to calculate the optimum flow routes in the design domain. The influence of the key design parameter q and the pressure drop on the optimum topology were also investigated. The channel topology became smoother with decreasing q, and the number of channels increased with increasing pressure drop.     

Fatigue design for plug/ring type gas welded joints of sts301l including welding residual stresses

This paper presents a fatigue design method for plug and ring type gas welded joints, which incorporates welding residual stress effects. A non-linear finite element analysis (FEA) was first performed to simulate the gas welding process. The numerically predicted residual stresses of the gas welds were then compared to experimental results measured using a hole drilling method. In order to evaluate the fatigue strength of the plug and ring type gas welded joints, a stress amplitude (σ _a ) _R taling the welding residual stress of the gas weld into account was introduced and is based on a modified Goodman equation incorporating the effect of the residual stress. Using the stress amplitude (σ _a ) _R , the ΔP-N _f relations obtained from fatigue tests for plug and ring type gas welded joints having various dimensions and shapes were systematically rearranged into (σ _a ) _R -N _f relations. It was found that the proposed stress amplitude (σ _a ) _R could provide a systematic and reasonable fatigue design criterion for the plug and ring type gas welded joints.     

Automotive structure vibration with component mode synthesis on a multi-level

The recursive component mode synthesis method (RCMS) has been implemented for the finite element analysis model of an automobile structure as an efficient free vibration analysis tool. The RCMS method is intended to obtain a better performance relative to the block Lanczos method, which is a traditional method in the industry of obtaining eigenvalues, while obtaining the acceptable accuracy. A numerical example of the automobile finite element model demonstrates the outstanding performance of RCMS compared to the block Lanczos method.     

A selection scheme for optimum number of cooperative secondary users in spectrum sensing

An optimization scheme for choosing the optimum number of secondary users in cooperative spectrum sensing based on the cyclostationary feature detection with Neyman-Pearson criterion is proposed in this paper. The optimal soft combination test statistic for the cooperative spectrum sensing based on cyclostationary feature detection is derived according to the generalized likelihood ratio test and its corresponding detection performance is deduced. A target function, considering two important parameters as the resource use efficiency and the number of samples employed by each cooperative secondary user in the system design, is constructed to obtain the optimum number of cooperative secondary users. It can be found that the selection scheme is to make a tradeoff between the system complexity of the cognitive radio network and the global sensing performance of the cooperative spectrum sensing.     

External equality and absolute equality coincide in finite CCS and <Emphasis Type="Italic">π</Emphasis> calculus without summation

External equality and absolute equality are defined model independently by Fu. It is interesting and important to know whether these two equalities coincide or not. There are some results in Fu’s paper for this issue. It is relatively easy to prove the coincidence if the summation operator is in the language, otherwise it is harder. In fact Fu proposed it as an open problem whether the two equalities coincide in some languages without summation. In this paper, the proofs of the coincidence in finite CCS and π calculus without summation are given.     

Development and application of thermal mathematical model of iron ore pellet bed in grate

Based on the analysis of heat transfer mechanics, physical and chemical change of pellet drying and preheating process in grate, the mathematical model is established and solved by three-diagonal matrix algorithm. With Visual Basic 6.0 a simulation software is developed. The model is verified by measurements at a domestic pellet plant, and the temperature distribution of pellet bed is gained. Meanwhile, the influence of different operation parameters on the pellet thermal process is studied. The results can be taken as a basis of practical production control and the grate optimizing design.     

The precautionary principle in maritime affairs

Since the 1980s, the precautionary principle has been drawing more and more international attention. This became particularly clear during the series of Conferences on the Protection of the North Sea, which addressed marine environmental protection, and initiated the application of the principle into maritime affairs. Although a unified concept of the precautionary principle is lacking, some typical formulations have been concluded in regional treaties and international documents, and components of the principle can be summarised (Part I and Part II). The precautionary principle has been adopted by international documents involving different fields of law of the sea, and been addressed by international courts and tribunals (Part III). While the precautionary principle is still not part of customary international law (Part IV), its increasing level of worldwide acceptance suggests that it will become a customary international law in the future.     

Effect on friction of engine oil seal with engine oil viscosity

Low viscosity engine oil can improve a vehicle’s fuel economy by decreasing the friction between the engine components. Frictional torque varies with the velocity change due to different viscosity characteristics of SAE grade 5W-20, 5W-30 and 5W-40 engine oils. The viscosity for each of these grades was measured to outline the effect low viscosity engine oils have on engine friction, which may lead to improved fuel economy. Engine oil seal frictional torque increases with the shaft rotational speed for all three engine oil grades. A decrease in engine oil seal frictional torque was confirmed when low viscosity engine oil was used. Also, the leak-free performance of the engine oil with the seal satisfied the life limit durability test criteria. Thus, low viscosity engine oil may be used to improve fuel economy by decreasing the frictional loss of the engine oil seal while having no negative impact on performance due to leak-free functioning.     

Mathematical model validated by a crash test for studying the occupant’s kinematics and dynamics in a cars’ frontal collision

The aim of the paper was to determine the kinematic parameters that influence the occupant injury risk through a mathematical model. The developed model is a 2D model composed of 4 bodies (2 vehicles, thorax and head). The head and thorax are interconnected with a rotation joint and a torsion spring meant to stiffen the relative movement between the bodies. The thorax is connected with the vehicle body by a linear spring meant to simulate the seatbelt stiffness. The model was solved using Lagrange principle and the validation of the model was made through a crash test performed using the same initial conditions and comparing the obtained values of the displacement, velocity and acceleration parameters with the ones obtained with the mathematical model. The head and torso were chosen due to the fact that they are the common parts of the body that get injured, especially the head with the change of 80 % to cause fatal injury in car’s frontal collision. Once the model was validated, the stiffness of the seatbelt was modified in order to determine the behavior of the occupant in case of car frontal collisions. When the seatbelt stiffness was reduced, the occupant displacement and velocity increased, while by increasing the stiffness, these parameters decreased. The values of the developed model presented a high degree of similarity with the results obtained from the crash test with an error of 10 %. This model can be used by engineers to easily asses the occupant injury risk in case of vehicle frontal collisions.