Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition,Part 2: Stress distribution in the double bottom and simplified approaches

This is the second of two companion papers dealing with nonlinear finite element modelling and ultimate strength analysis of the hull girder of a bulk carrier under Alternate Hold Loading (AHL) condition. The methodology for nonlinear finite element modelling as well as the ultimate strength results from the nonlinear FE analyses was discussed in the companion paper (Part 1). The purpose of the present paper is to use the FE results to contribute towards developing simplified methods applicable to practical design of ship hulls under combined global and local loads. An important issue is the significant double bottom bending in the empty hold in AHL due to combined global hull girder bending moment and local loads. Therefore, the stress distributions in the double bottom area at different load levels i.e. rule load level and ultimate failure load level are presented in detail. The implication of different design pressures obtained by different rules (CSR-BC rules and DNV rules) on the stress distribution is investigated. Both (partially) heavy cargo AHL and fully loaded cargo AHL are considered. Factors of influence of double bottom bending such as initial imperfections, local loads, stress distribution and failure modes on the hull girder strength are discussed. Simplified procedures for determination of the hull girder strength for bulk carriers under AHL conditions are also discussed in light of the FE analyses.     

评柯胡《社会、贸易及组织:3世纪至13世纪的闽南》

泉州位于福建沿海,是中国宋元时期著名的港口城市之一,在中国与其他国家发展贸易、文化及外交往来中发挥了重要的作用.目前,有关泉州的各种语言的文献记载和研究,数量还是相当多的,然而,将其置于一个较大的区域性框架下进行考察的研究还比较少见.在本人尚未出版的完成于1982年的博士论文中,就曾作过这方面的尝试.我在自己的论文中,不仅把泉州视作一个繁荣的海港,更把它看作是泉州、漳州、兴化三府区域的中心.[2]柯胡的大著无疑是第一部从此视角来研究泉州的英语学术著作.书中涉及的区域包括福建的南部沿海地区,明清时期多称之为闽南,但作者称之为泉南.     

Improved modeling of park‐and‐ride transfer time: Capturing the within‐day dynamics

An important factor that affects park‐and‐ride demand is transfer time. However, conventional park‐and‐ride demand models treat transfer time as a single value, without considering the time‐of‐day effect. Since early comers usually occupy spots closer to the entrance, their transfer times are shorter. Hence, there is a relationship between arrival time and transfer time. To analyze this relationship, a micro‐simulation model is developed. The model simulates the queuing system at the entrance and the pattern that parking spots are occupied in the parking lot over time. As expected, the model output illustrates an increasing relationship between arrival time and transfer time. This relationship has significant implication in mode choice models because it means that the attractiveness of park‐and‐ride depends on the time of arrival at the park‐and‐ride lot. This model of park‐and‐ride transfer time can potentially improve travel demand forecasting, as well as facilitate the operation and design of park‐and‐ride facilities.     

Passenger route guidance system for multi‐modal transit networks

In many public transport oriented cities in the world, especially Asian cities, the public transport system has been developed extensively, to the extent that it has become increasingly difficult to navigate. Although inter‐modal transfers are common and often necessary, a complete set of the routes across transport modes is generally not presented in a form that is accessible to travelers, as each operator would only publish its own routes. Moreover, the common nonlinear fare tables together with inter‐modal fare discounts pose challenges to travelers in deciding their best routes. This study develops a multi‐modal passenger route guidance system, called eFinder, to aid travelers with their combined mode‐route choices. We discuss the architecture and features of this system in this study. This system forms a platform for disseminating public transit information and should complement further development and use of the public transport network by enabling travelers to make informed choices.     

Application of fuzzy theory for identifying the required availability of an autonomous localization unit in European Train Control System

According to the evolution tendency of the control decision process from a trackside to a train-borne system, various autonomous localization units for railway vehicles were developed. As recommended in railway standards, the design process of each system, here the autonomous localization units (LU), follows the V-model whose first step is to define its availability requirement in order to satisfy the global ETCS system requirements. The classical approach for assigning the subsystem availability is based on the assumption that failure parameters of other units are precisely known. This assumption is too restricted in reality due to the lack of information. In this paper, we propose a new approach that allows taking into account uncertainties in the dependability parameters of the ETCS components for identifying the upper threshold of the LU unavailability to reach ETCS availability requirements. Using fuzzy fault trees, the fuzzy unavailability of the ETCS without the autonomous LU is evaluated. Then, based on its membership function, we assess the satisfaction rate that an advanced ETCS with the autonomous LU can satisfy the ETCS availability target.     

An object-oriented approach to transport modelling: Software development to calculate road traffic noise

A framework for developing object-oriented software in transport modelling in proposed and demonstrated with the implementation of the calculation of road traffic noise (CORTN). Major tasks in the life cycle of an object-oriented development process are identified, and illustrated with the implementation of TRANSOOP – a software library containing 33,000 lines of C++ programming code. Software re-use from this library to produce a object-oriented noise program is compared with conventional computer programming shows that almost 90 per cent of the lines of code were drawn from TRANSOOP. Advantages of the object-oriented approach are discussed.     

推动东北地区的振兴

中国东北省份的振兴举措成为中国观察家关注的焦点，在充分剖析了珠江和长江三角洲地区之后，最近他们开始热衷于了解中国的其他地区。     

单个逆变器驱动两台并联感应电机的无速度传感器矢量控制方法

介绍在单个逆变器驱动两台定子绕组并联的感应电机时,对各转子产生的转矩采取无速度传感器矢量控制的方法.该方法采用自适应转子磁通观测器取代磁通传感器,磁通观测器中增加转子速度自适应测定来取代速度传感器.试验结果表明,在每台感应电机不同的额定条件下,该方法是实用的.     

Optimizing shipping company operations using business process modelling

In order to identify the elements constituting quality in services, a business process modelling methodology has been applied in the case of a Greek liner shipping company. The company operations have been identified and analysed in order to assess the complete performance of service elements and thereafter identify how to match the service performance against the user requirements. A liner container service within Europe has to compete with the road transport which, in many cases, is an alternative to the sea transportation and not complementary to it. Thus, not only the ship has to be envisaged when aiming to improve quality in services but also the whole chain, namely port authorities, land transportation enterprises, subcontractors, agents, charterers and others. A set of potential improvements within this framework are thus suggested and time and cost (examined in a specific voyage scenario) are measured before and after the implementation of these measures. Very large time and cost savings are observed after the application of the technology improvements, allowing, in fact, the shipping company to even increase the number of round trips per year in the examined route. This indicates that very large benefits can be drawn by analysing and critically adjusting business processes in modern shipping companies.     

History of Stability of Railway and Road Vehicles

Stability of running of vehicles is one of the important design criteria of railway and road vehicles. Railway vehicle stability is based on kinematics as well as contact mechanics. It reaches back to the 19th century and had its first hey-day with the work of Carter and Rocard on stability of locomotives. A rediscovery of their knowledge, which seemed to have been forgotten, was inevitable due to increased vehicle speeds since the early Fifties. — Though investigations on road vehicle stability only began approximately in 1930 with the treatment of the shimmy phenomenon, realistic solutions were available at the same time as for railway vehicles. Besides considering historical aspects we discuss in the paper links which exist between both approaches; open questions are described.