Research on the thrust output of a long primary double-sided linear induction motorEI北大核心

Research purposes: Based on Maxwell equations and T-type equivalent circuit of linear induction motor, we analyze the electromagnetic thrust output of a double-sided linear induction motor in the case of edge effect, and use the finite element method and simulation to test the effectiveness of the theoretical calculation. We further derivate the mathematical expressions of a double-sided linear induction motor, build the simulation model by parameter design, and experimentally analyze the slip frequency control thrust output in conditions of different operating. Through analysis of the output characteristics of the electromagnetic force, optimal control of constant current slip frequency is achieved. Research conclusions: (1) We calculate various mechanical properties of a bilateral linear induction motor through its mathematical model and equivalent circuit, and derive the corrected coefficients of the horizontal and vertical edge effect. When the motor runs at a high speed, the edge effect has little influence on the output of the electromagnetic force. (2) We use the finite element computer software to establish the simulation model of a bilateral linear induction motor, and compare the theoretical calculation and simulation data: the simulation results are consistent with theoretical calculation, thus ensuring the validity of the mathematical model. (3) We simulate and analyze the influence of slip frequency, speed, suspension air gap, and length of the mover on electromagnetic force. At different speeds, properly adjusting the slip frequency can increase the output of electromagnetic force. For low speed, the optimal slip frequency is near 2 Hz; for high speed, the optimal slip frequency is between 4.0 Hz and 6.0 Hz. When satisfying the motor's rated condition, the optimal control of electromagnetic force is achieved. (4) The research result of double-sided linear induction motor can provide important implications for the electromagnetic launch system of an aircraft carrier.     

Examination of factors affecting freeway incident clearance times: a comparison of the generalized F model and several alternative nested models

Traffic incidents are a principal cause of congestion on urban freeways, reducing capacity and creating risks for both involved motorists and incident response personnel. As incident durations increase, the risk of secondary incidents or crashes also becomes problematic. In response to these issues, many road agencies in metropolitan areas have initiated incident management programs aimed at detecting, responding to, and clearing incidents to restore freeways to full capacity as quickly and safely as possible. This study examined those factors that impact the time required by the Michigan Department of Transportation Freeway Courtesy Patrol to clear incidents that occurred on the southeastern Michigan freeway network. These models were developed using traffic flow data, roadway geometry information, and an extensive incident inventory database. A series of parametric hazard duration models were developed, each assuming a different underlying probability distribution for the hazard function. Although each modeling framework provided results that were similar in terms of the direction of factor effects, there was significant variability in terms of the estimated magnitude of these impacts. The generalized F distribution was shown to provide the best fit to the incident clearance time data, and the use of poorer fitting distributions was shown to result in severe over‐estimation or under‐estimation of factor effects. Those factors that were found to impact incident clearance times included the time of day and month when the incident occurred, the geometric and traffic characteristics of the freeway segment, and the characteristics of each incident. Copyright © 2012 John Wiley & Sons, Ltd.     

Optimization of pedestrian phase patterns at signalized intersections: a multi‐objective approach

This paper presents a multi‐objective optimization model and its solution algorithm for optimization of pedestrian phase patterns, including the exclusive pedestrian phase (EPP) and the conventional two‐way crossing (TWC) at an intersection. The proposed model will determine the optimal pedestrian phase pattern and the corresponding signal timings at an intersection to best accommodate both vehicular traffic and pedestrian movements. The proposed model is unique with respect to the following three critical features: (1) proposing an unbiased performance index for comparison of EPP and TWC by explicitly modeling the pedestrian delay under the control of TWC and EPP; (2) developing a multi‐objective model to maximize the utilization of the available green time by vehicular traffic and pedestrian under both EPP or TWC; and (3) designing a genetic algorithm based heuristic algorithm to solve the model. Case study and sensitivity analysis results have shown the promising property of the proposed model to assist traffic practitioners, researchers, and authorities in properly selecting pedestrian phase patterns at signalized intersections. Copyright © 2013 John Wiley & Sons, Ltd.     

The decline of the U.K. merchant fleet: an assessment of government policies in recent years—a rejoinder to Goss's comment

In recent years, the Hong Kong port has been challenged by the emergence of the Shenzhen port. This gives rise to a concern that the high terminal handling charges (THC) levied by the Hong Kong terminal operators are undermining the competitiveness of the Hong Kong port. As the major container terminals in both Hong Kong and Shenzhen are operated by the Hong Kong terminal operators, the monopoly power of these operators is commonly believed to be the cause of the high THC in Hong Kong. The theoretical model developed in this study shows that the trigger point mechanism (TPM) used by the Hong Kong Government to control the supply of terminal capacity may be a source of such monopoly power. Two possible scenarios are considered in the model—Scenario 1 in which expansion of capacity is unconstrained (i.e. the Shenzhen port); and Scenario 2 in which expansion of capacity is constrained by TPM (i.e. the Hong Kong port). Under TPM, the Hong Kong Government commits not to grant the right to build new container terminals unless and until the demand for container handling services exceeds the current capacity by a certain amount, which provides the incumbent operators incentives to invest preemptively in excess capacity in order to block the entry of potential entrants. This model is supported by the empirical findings from this study. The results from this study suggest an urgent need for the Hong Kong Government to overhaul the current port development policy as a part of the effort to promote economic integration between Hong Kong and the Mainland China.     

Maritime transportation research: topics and methodologies

The purpose of this paper is to review and analyze maritime transportation academic research. For articles published in Maritime Policy & Management (MPM) in the period 2001 to 2012, the most frequent topics addressed include shipping performance/management and shipping finance. For articles published in Maritime Economics & Logistics (MEL) in the period 2002 to 2012, the most frequent topics addressed include port performance and shipping performance/management. MPM articles are more likely than MEL articles to utilize the institutional (IS) methodology and MEL articles are more likely than MPM articles to utilize the optimization (OP) methodology. Maritime transportation proposition theoretical research may be particularly useful in undertaking research in maritime transportation areas for which data are unavailable, insufficient, difficult to obtain, or of poor quality. Future maritime transportation research needs to include focus on: (i) maritime shippers, (ii) maritime transport chains, (iii) maritime transportation as a service, (iv) the quality of maritime transportation, and (v) maritime theoretical proposition research.     

Optimal portfolio choice for ship leasing investments

ABSTRACT

We develop an advanced portfolio analysis method to determine the optimal ship mix for a portfolio. A typical business model of a ship leasing firm is to acquire ships for charter income. However, transportation assets (such as ships and aircraft) are different from financial assets (e.g. stocks and bonds) as they are tangible and have a limited useful life. Thus, methodologies for financial portfolios cannot be simply extended to portfolios of transportation assets. Recently, ship leasing represents a non-traditional source of ship finance. A ship leasing firm can manage a certain number of ships across different ship types. Based on portfolio theory and industry-related evidence, we construct an optimal ship portfolio consisting of a manageable combination of carefully chosen ships. The expected return of the asset combination is examined with respect to various ship types and sizes. We quantify the freight risk for different categories of ships in different sectors to investigate the characteristics of ship portfolios. The estimation of such freight risk is of considerable interest to academics and practitioners alike, because determining the behaviour of freight risk has important implications for investment decisions regarding ships. Our portfolio method should strongly support the decision-making process involved in leasing ships.     

Indirect Effects to Include in Strategic Environmental Assessments of Transport Infrastructure Investments

Abstract

Indirect effects are important considerations when making consequence analyses in general and in strategic environmental assessments in particular of potential transport solutions and infrastructure plans. The primary objective of this paper is to emphasize the need for a deeper understanding of the long‐term system effects of investments in transport infrastructure with a focus on the structuring effects that roads and railways have on society, e.g. altered transport patterns, altered settlement structures and changes in use of the built environment. Special attention is given to the following potential indirect effects: increased total transport volume, increased share of private motorists and truck transport, increased urban sprawl, and increased energy use in buildings. The conditions that determine the power of the effects are discussed and a number of key factors to be considered in transport infrastructure planning, especially in strategic environmental assessments, are suggested. Since many indirect effects emerge over time, an extended time perspective is of essence. Therefore, scenario techniques may be useful when analysing indirect effects in transport planning processes.     

Port Economics,Policy and Management: Content Classification and Survey

This paper presents a taxonomy and analysis of the content of published research in port economics, policy and management (port studies). The recent increase of these publications suggests a growing interest in the study of ports. However, the research characteristics and directions of this research field are unidentified. This paper provides a systematic analysis of port studies published during the period 1997–2008. A comprehensive cross-citation and analysis of the themes, approaches and findings of all 395 relevant journal papers identifies the extent to which the research field is maturing, and the leading papers. This paper also presents an extensive analysis of the content, based on the classification of all port studies into seven research themes. For each theme, research topics, widely used research questions, concepts and research methods and the most important research findings are discussed. Finally, we identify emerging research challenges and research questions that still need to be answered.     

PIV study of the effect of piston position on the in-cylinder swirling flow during the scavenging process in large two-stroke marine diesel engines

A simplified model of a low speed large two-stroke marine diesel engine cylinder is developed. The effect of piston position on the in-cylinder swirling flow during the scavenging process is studied using the stereoscopic particle image velocimetry technique. The measurements are conducted at different cross-sectional planes along the cylinder length and at piston positions covering the air intake port by 0, 25, 50 and 75 %. When the intake port is fully open, the tangential velocity profile is similar to a Burgers vortex, whereas the axial velocity has a wake-like profile. Due to internal wall friction, the swirl decays downstream, and the size of the vortex core increases. For increasing port closures, the tangential velocity profile changes from a Burgers vortex to a forced vortex, and the axial velocity changes correspondingly from a wake-like profile to a jet-like profile. For piston position with 75 % intake port closure, the jet-like axial velocity profile at a cross-sectional plane close to the intake port changes back to a wake-like profile at the adjacent downstream cross-sectional plane. This is characteristic of a vortex breakdown. The non-dimensional velocity profiles show no significant variation with the variation in Reynolds number.