Optimal synthesis of function generation in steering linkages

This paper presents an approach to optimize planar mechanisms for function generation synthesis. It is applied to the design of different steering linkages used in road vehicles where the Ackermann condition is formulated as the objective function. Four different mechanisms are kinematically defined and synthesized in terms of the proposed method. Limitations of the size of the elements are also considered by means of inequality constraints. Solutions are presented as the difference between desired behaviour, established by Ackermann, and actual generated performance. The results show that the accuracy achieved by the proposed procedure is satisfactory for working conditions in this type of linkages.     

Benthic sediment composition and nutrient cycling in an Intermittently Closed and Open Lake Lagoon

Surfical sediments within Corunna Lake, a moderate size Intermittently Closed and Open Lake Lagoon (ICOLL), were examined for solid phase nutrient concentrations (TN, TP, TOC,) and solute exchange rates between the sediment and water column (O₂, NO₃–N, NH₄–N, FRP, and N₂). The surfical sediments in Corunna Lake contained high concentrations of TN (5 mg/g dry mass), total phosphorus (0.6 mg/g dry mass), and TOC (~ 5% dry mass). The carbon stable isotope ratio (δ¹³C) and TOC:TN ratios (δ¹³C ~ ? 24, TOC:TN ~ 11–14) demonstrated that the composition of the organic matter in the sediment was a mixture derived primarily of degraded planktonic matter. The close association between TP and Fe concentrations highlighted the potential role Fe plays in mediating Filterable Reactive Phosphorus (FRP) concentrations in the water column of Corunna Lake. In situ benthic chamber incubations were used to measure benthic fluxes. Solute exchange rates between the sediment and water column in Corunna Lake were similar to other reported studies (O₂ = ? 469 to ? 1765 µmol m^? 2 h^? 1, NH₄–N = 0.1–63 µmol m^? 2 h^? 1, NO₂/NO₃–N = 0 µmol m^? 2 h^? 1, FRP = ? 4–1.6 µmol m^? 2 h^? 1and N₂ = 12–356 µmol m^? 2 h^? 1). As more carbon was deposited and mineralized the efficiency of the bacterial population to denitrify nitrogen in the sediment decreases. The linkage between land use and benthic biogeochemistry was also explored. A dairy farm exists in the middle catchment of Corunna Lake, and the receiving bay sediment consistently demonstrated the highest oxygen consumption rates in winter and spring (? 1408 µmol m^? 2 h^? 1 in winter, ? 1691 µmol m^? 2 h^? 1 in spring) and lowest denitrification efficiencies during summer (~ 3%). Nitrate/nitrite fluxes were not observed during any of the chamber incubations, with the concentrations of nitrate/nitrite being below detection limits (< 10 μg/L). Seasonal changes influenced the rates of solute exchange between the sediment and water column. Critical measures of solute exchange for NH₄–N and biogenic N₂ indicated that seasonal temperature changes play a significant role in mediating the reaction rates of sedimentary based biogeochemical processes. Measurable FRP fluxes were small but greater in the benthic sediments which received higher carbon inputs. Sediments have a high capacity to adsorb P which is released as sediment oxygen demand increases as a result of increases in labile carbon loads.     

Modelling journey‐to‐work fuel consumption: a case study of Bayridge subdivision

Fuel consumption is calculated using a modelling procedure for automobiles travelling on three alternative street patterns designed for a subdivision in Kingston Township, Ontario. The modelling procedure is described. The results indicate that grid and solar superblock street patterns, compared to the existing street pattern, offer small fuel savings to a tripmaker in the portion of the work trip travelled in the subdivision.     

Cycle-simulation turbulence modelling of IC engines

Numerical simulations of IC engines are of high interest for automotive engineers worldwide. The simulation models should be as fast as possible, low-computational effort and predictive tool. The correct prediction of turbulence level inside the combustion chamber of spark ignition engines is the most important factor influencing to the engine working cycle. This paper presents a development of the k-ε turbulence model applied to the commercial cycle-simulation software with the high emphasis on the intake part. The validation was performed on two engine geometries with the variation of engine speed and load comparing the cycle-simulation results of the turbulent kinetic energy and in-cylinder temperature with 3-D CFD results. In order to apply the cycle-simulation turbulence model for the simulation of entire engine map, the parameterization model of turbulence constants was proposed. The parameterized turbulence model was optimized using NLPQL optimization algorithm where the single set of turbulence model parameters for each engine was found. A good agreement of the turbulent kinetic energy during the expansion was achieved when the turbulence affects the flame front propagation and combustion rate as well.     

Household attitudes toward environmental quality in a coastal South Carolina County

Abstract

This paper presents an analysis of the findings of a survey of a sample of Beaufort county, South Carolina, households which was conducted to ascertain preferences for environmental quality. These preferences were approximated from survey responses on willingness to pay for environmental amenities and the size of payments households would require to forfeit them. A scale was developed and used to rank these responses ordinally, and the matrices of scaled responses for each of eight household annual‐income classes were subjected to factor analyses.     

The EEZ and the progress of fisheries negotiations January to May 1977

This paper discusses negotiations, relative to sea fisheries, in terms of international arrangements—arrangements between the European Economic Community (EEC) and Third Countries; and those between member states of the EEC.     

International cooperation in Maritime casualty Investigations: an analysis of IMO RESOLUTION A.637 (1 6)

On 19 October 1989, the International Maritime Organization adopted a joint uslliberian resolution meant to advance international cooperation in maritime casualty investigations. This resolution reflected an international determination to achieve greater cooperation between different states in investigative matters, in a manner consistent with international law. This paper examines how the IMO resolution addresses some of the inherent problems in such a multi-national industry. It also examines the question of whether us lawmakers may, or should, impose stricter controls and restrictions unilaterally on foreign-flag ships which call on us ports.     

A user‐resource planning framework for offshore recreational artificial reefs

Abstract

Artificial reefs have been used extensively in coastal waters to attract and enhance recreational fishery resources. In the United States, they have been traditionally built from “materials of opportunity”; using limited budgets. This paper explores some past planning philosophies and presents a recent artificial reef deployment case that demonstrates a lack of sensitivity to local and regional recreational demand. A systems framework is developed to guide future planning efforts in artificial reef development. The framework is intended to integrate previously fragmented knowledge and to demonstrate the interdisciplinary nature of artificial reef planning. Emphasis is given to advance planning, user dimensions, and the integral issue of reef access.