Research on vibration and near-field sound radiation of ring-ribbed cylindrical shell coated deadening and decoupling materials

The research on structural vibration and sound radiation of underwater ring-ribbed cylindrical shell, which is coated with a kind of deadening and decoupling materials, becomes a focus in recent years. This paper analyzes the problem on two aspects: model experiment and numerical calculation. The model experiment is carried out including three cases firstly, in which the structural vibration response and radiating acoustic field are measured respectively, and the results gained in these three cases are analyzed to discuss the effect of reducing structural vibration and radiating noise of the deadening and decoupling materials. The coupling FEM/BEM and the SEA methods are both used in numerical calculation, i.e. the arithmetic of the coupling FEM/BEM method is adopted to calculate the low frequency characteristics and the SEA method is adopted to calculate the medium-high frequencies characteristics of the model. By comparing experimental results with numerical calculation results, it is proved that the algorithm adopted in this paper is reasonable.     

Classification of underwater still objects based on multi-field features and SVM

A Support Vector Machine is used as a classifier to the automatic detection and recognition of underwater still objects. Discrimination between the objects can be transferred into different projection spaces by the process of multi-field feature extraction. The multi-field feature vector includes time-domain, spectral, time-frequency distribution and bi-spectral features. Underwater target recognition can be considered as a problem of small sample recognition. SVM algorithm is appropriate to this kind of problems because of its outstanding generalizability. The SVM is contrasted with a Gaussian classifier and a k-nearest classifier in some experiments using real data of lake or sea trial. The experimental results indicate that SVM is better than the others two.     

A new source number estimation method based on the beam eigenvalue

Most source number estimation methods based on the eigenvalues are decomposed by covariance matrix in MUSIC algorithm. To develop the source number estimation method which has lower signal to noise ratio and is suitable to both correlated and uncorrelated impinging signals, a new source number estimation method called beam eigenvalue method (BEM) is proposed in this paper. Through analyzing the space power spectrum and the correlation of the line array, the covariance matrix is constructed in a new way, which is decided by the line array shape when the signal frequency is given. Both of the theory analysis and the simulation results show that the BEM method can estimate the source number for correlated signals and can be more effective at lower signal to noise ratios than the normal source number estimation methods.     

Research on vibration characteristics of L-shaped plate using a mobility power flow approach

L-shaped plates have become an important focuses in structural vibration research. To determine their vibration characteristics, this paper applied a mobility power flow method. Firstly, the L-shaped plate was divided into two substructures to simplify analysis. The coupled bending moment was then deduced by applying a continuous vibration property on the common edge. Next, the response on any point of the plate and the input and transmitted power flow formulas were calculated. Numerical simulations showed the distribution of the coupled bending moment and the response of the whole structure. The validity of this method was verified by the SEA approach.     

Measuring the effectiveness of methods for evaluating noise jammers

Reliable evaluations of a noise jammer's effectiveness are necessary to properly design, manufacture, and operate one, so it is important to have an evaluation model. Based on their characteristics and principles, relevant factors were classified in terms of their contribution to a unit's effectiveness. In this way an evaluation index system was established. In the proposed mathematical model a noise jammer is analyzed by combining the model of system effectiveness with the method of analytic hierarchical process. A simulation of underwater acoustic countermeasures was used to test the rationality and feasibility of the model. The results showed that this model is an effective way to solve the challenge of evaluating the effectiveness of non-offensive weapons under single working phase.     

Essentials of general average: A synoptic overview of an ancient maritime law

This article provides a synoptic overview of the concept of general average which is one of the saving acts in maritime law. Its principles were entrenched in the Roman law which acknowledged its origins being rooted in the Sea Law of Rhodes. Its evolution as customary law through the medieval maritime codes of the Mediterranean region is also traced in the article. The reader is then brought into the modern era of the international regime of general average through the advent of the York-Antwerp Rules. The basic principles of general average loss, including expenditures and sacrifices, and general average contributions are introduced through references to a number of leading cases. The current status of this ancient law and practice and debates over its future are briefly addressed in conclusion.     

Modeling a high output marine steam generator feedwater control system which uses parallel turbine-driven feed pumps

Parallel turbine-driven feedwater pumps are needed when ships travel at high speed. In order to study marine steam generator feedwater control systems which use parallel turbine-driven feed pumps, a mathematical model of marine steam generator feedwater control system was developed which includes mathematical models of two steam generators and parallel turbine-driven feed pumps as well as mathematical models of feedwater pipes and feed regulating valves. The operating condition points of the parallel ttu-bine-driven feed pumps were calculated by the Chebyshev curve fit method. A water level controller for the steam generator and a rotary speed controller for the turbine-driven feed pumps were also included in the model. The accuracy of the mathematical models and their controllers was verified by comparing their results with those from a simulator.     

Mathematical model for takeoff simulation of a wing in proximity to the ground

Aircraft flying close to the ground benefit from enhanced efficiency owing to decreased induced drag and increased lift. In this study, a mathematical model is developed to simulate the takeoff of a wing near the ground using an Iterative Boundary Element Method (IBEM) and the finite difference scheme. Two stand-alone sub-codes and a mother code, which enables communication between the sub-codes, are developed to solve for the self-excitation of the Wing-In-Ground (WIG) effect. The aerodynamic force exerted on the wing is calculated by the first sub-code using the IBEM, and the vertical displacement of the wing is calculated by the second sub-code using the finite difference scheme. The mother code commands the two sub-codes and can solve for the aerodynamics of the wing and operating height within seconds. The developed code system is used to solve for the force, velocity, and displacement of an NACA6409 wing at a 4° Angle of Attack (AoA) which has various numerical and experimental studies in the literature. The effects of thickness and AoA are then investigated and conclusions were drawn with respect to generated results. The proposed model provides a practical method for understanding the flight dynamics and it is specifically beneficial at the pre-design stages of a WIG effect craft.     

Modeling of ship maneuvering motion using neural networks

In this paper, Neural Networks (NNs) are used in the modeling of ship maneuvering motion. A nonlinear response model and a linear hydrodynamic model of ship maneuvering motion are also investigated. The maneuverability indices and linear non-dimensional hydrodynamic derivatives in the models are identified by using two-layer feed forward NNs. The stability of parametric estimation is confirmed. Then, the ship maneuvering motion is predicted based on the obtained models. A comparison between the predicted results and the model test results demonstrates the validity of the proposed modeling method.     

Effect of injection angle on artificial cavitation using the design of experiment method

Using the supercavitation phenomenon is necessary to reach high velocities underwater. Supercavitation can be achieved in two ways: natural and artificial. In this article, the simulation of flows around a torpedo was studied naturally and artificially. The validity of simulation using theoretical and practical data in the natural and artificial phases was evaluated. Results showed that the simulations were consistent with the laboratory results. The results in different injection coefficient rates, injection angles, and cavitation numbers were studied. The obtained results showed the importance of cavitation number, injection rate coefficient, and injection angle in cavity shape. At the final level, determining the performance conditions using the Design of Experiment (DOE) method was emphasized, and the performance of cavitation number, injection rate coefficient, and injection angle in drag and lift coefficient was studied. The increase in injection angle in the low injection rate coefficient resulted in a diminished drag coefficient and that in the high injection rate coefficient resulted in an enhanced drag coefficient.