Long-term behavior of particulate matters at urban roadside and background locations in Seoul,Korea

The concentrations of particulate matter, PM_2.5, PM₁₀, and TSP at an urban roadside and an urban background station are analyzed. Data collected over a 10 year period are analyzed. The concentrations of the particulates measured at the urban site are systematically larger than at the background station. The mean PM values at the former also exhibit a slight fall over the decade unlike those at the background station. Overall, the particulate matters at both locations are in an intermediate range of global level, e.g., approximately two times lower than those in other Asian regions but higher than in Europe.     

Autonomous Emergency Braking Considering Road Slope and Friction Coefficient

The Autonomous Emergency Braking (AEB) systems have been actively studied for the safety enhancement and commercialized for the past few years. Because the driver tends to overly rely upon active safety systems, AEB needs to be designed to reflect the real road situations such as various road slope and friction coefficient. In this study, an AEB control algorithm is proposed to compensate for the effects of the slope and the friction of road. Based on the maximum possible deceleration for the real road conditions, the minimum braking distance is described with margin parameters for AEB activation control. The deceleration controller with a feedforward term is designed to avoid the collision during AEB operation on real road conditions. The proposed algorithm is validated in simulations first and the experimental verification is performed in the various slope conditions.     

Mean Value WGT Diesel Engine Calibration Model for Effective Simulation Research

Recently, to improve vehicle fuel economy, as well as the performance of internal combustion engines, optimized system matching between a vehicle’s drivetrain and engine has become a very important technical issue. For this reason, the need for simulation research on engine and vehicle performance improvement has increased. But in general, since both engine simulation and vehicle simulation require initial engine calibration map input, a simple engine calibration method is required for the efficient configuration of various virtual engine calibration map setups. On this background, in this study, an example of waste gate turbocharger (WGT) cooled — exhaust gas recirculation (EGR) Diesel engine calibration using a test-based mean value engine model is presented as a suitable engine calibration map setting method. Also, the feasibility of an engine calibration model is confirmed through various engine tests. Using the simple model presented here, it is possible for diverse engine operating conditions and engine performance maps to be acquired.     

Requirement-based testing of an automotive ECU considering the behavior of the vehicle

HILS (Hardware In the Loop Simulation) and RBT (Requirement-Based Testing) are widely used to evaluate the performance and reliability of automotive ECUs (Electronic Control Units). The HILS method is used to predict the behavior of ECU-installed vehicles and to evaluate the performance of ECU controllers. RBT evaluates whether the embedded system satisfies the pre-defined requirements. In this study, the behavior of a vehicle is regarded as a system requirement, and an embedded system test procedure that evaluates the system requirement is proposed. In particular, a new method is introduced, which integrates HILS with RBT. Using the proposed method, the behavior of an articulated vehicle equipped with an AWS (All Wheel Steering) ECU is evaluated with RBT software.     

Torque control of engine clutch to improve the driving quality of hybrid electric vehicles

As a powertrain for hybrid electric vehicles (HEVs), the automatic transmission (AT) is not only convenient for the driver but also reduces hybridization costs because the existing production line is used to produce the AT. However, it has low fuel economy due to the torque converter. To overcome this disadvantage, this paper studies HEVs equipped an AT without a torque converter. In this case, additional torque control is needed to prevent the driving quality from deteriorating. This paper suggests three different torque control methods and develops a simulator for an HEV that can simulate the dynamic behaviors of the HEV when the engine clutch is engaged. The HEV drive train is modeled with AMESim, and a controller model is developed with MATLAB/Simulink. A co-simulation environment is established. By using the developed HEV simulator, simulations are conducted to analyze the dynamic behaviors of the HEV according to the control methods.     

Autonomous vehicle control systems for safe crossroads

This article presents a cooperative manoeuvre among three dual mode cars – vehicles equipped with sensors and actuators, and that can be driven either manually or autonomously. One vehicle is driven autonomously and the other two are driven manually. The main objective is to test two decision algorithms for priority conflict resolution at intersections so that a vehicle autonomously driven can take their own decision about crossing an intersection mingling with manually driven cars without the need for infrastructure modifications. To do this, the system needs the position, speeds, and turning intentions of the rest of the cars involved in the manoeuvre. This information is acquired via communications, but other methods are also viable, such as artificial vision. The idea of the experiments was to adjust the speed of the manually driven vehicles to force a situation where all three vehicles arrive at an intersection at the same time.     

Comparative study on model-scale sloshing tests

This paper considers a comparative study on model-scale sloshing tests. There are two primary scopes of this study: the comparison of sloshing pressure measured in 1/50-scale model tests at Seoul National University (SNU) with (1) the data measured at the other facility for the same model, and (2) the data measured on a smaller scale model. For the comparative study, model tanks are excited with the same irregular motions with Froude scale, and sloshing pressure signals are measured at the same locations. The statistical quantities of 1/50-scale model tests are compared with those of other facility and 1/70-scale model tests. In this study, it is found that peak pressure measured at SNU are slightly lower than those of other facility, and this difference may be due to different sensor types and sensing diameters.     

Development of a control strategy based on the transmission efficiency with mechanical loss for a dual mode power split-type hybrid electric vehicle

In this study, a control strategy for a dual mode power split-type hybrid electric vehicle (HEV) is developed based on the powertrain efficiency. To evaluate the transmission characteristics of the dual mode power split transmission (PST), a mechanical loss model of the transmission (TM loss) is constructed. The transmission efficiency, including the TM loss, is evaluated for the dual mode PST. Two control strategies for the dual mode PST are proposed. An optimal operation line (OOL) control strategy is developed to maintain a high engine thermal efficiency by controlling the engine operation point on the OOL. A speed ratio (SR) control strategy is proposed to obtain a greater transmission efficiency by shifting the engine operation point when the dual mode PST operates near the mechanical points. Using the TM loss and the proposed control strategies, a vehicle performance simulation is conducted to evaluate the performance of the two control strategies for dual mode PST. The simulation results demonstrate that, for the SR control strategy, the engine efficiency decreases because the engine operates beyond the OOL. However, the transmission efficiency of the dual mode PST increases because the PST operates near the mechanical point where the PST shows the greatest transmission efficiency. Consequently, the fuel economy of the SR control strategy is improved by 3.8% compared with the OOL control strategy.     

Service quality,satisfaction and behavioral intentions towards public transport from the point of view of private vehicle users

Transportation - In order to attract car users towards the public transport services in an urban and metropolitan context, contributing to a sustainable mobility in cities, it is fundamental to...     

Existence,relatedness and growth needs as mediators between mode choice and travel satisfaction: evidence from Denmark

Transportation - Understanding the link between mode choice and travel satisfaction is essential for promoting sustainable travel by expanding utility theory to include also the eudaimonic value of...