Study of RCM-based maintenance planning for complex structures using soft computing technique

To guarantee the efficiency of maintenance strategies for a complex structure, safety and cost limitations must be considered. This research introduces RCM-based (Reliability Centered Maintenance) life cycle optimization for reasonable maintenance. The design variable is the reliability of each part, which consists of a complex structure, while the objective is to minimize the total cost function in order to maintain the system within the desired system reliability. This research constructs the cost function that can reflect the current operating condition and maintenance characteristics of individual parts by generating essential cost factors. To identify the optimal reliability of each component in a system, this paper uses a Neuro-Evolutionary technique. Additionally, this research analyzes the reliability growth of a system by using the AMSAA (Army Material Systems Analysis Activity) model to estimate the failure rate of each part. The MTBF (Mean Time Between Failure) and the failure rate of the whole system, which is responding to the individual parts, are estimated based on the history data by using neural networks. Finally, this paper presents the optimal life cycle of a complex structure by applying the optimal reliability and the estimated MTBF to the RAMS (Reliability, Availability, Maintainability, and Safety) algorithm.     

Effects of valve timing and intake flow motion control on combustion and time-resolved HC & NOx formation characteristics

In SI engines, valve events have a major influence on volumetric efficiency, fuel economy and exhaust emissions. Moreover, swirl and tumble motions in the intake charge also improve combustion speed and quality by stratifying the mixture as well as intensifying the mixing rate of air and fuel. This paper investigates the behaviors of an engine and the combustion phenomenon for various intake valve timings and intake charge motions using CVVT system and port masking schemes. Test condition includes a part load and a cold idle condition inclusive of a cold start of the engine. Time-resolved HC and NOx emissions were also measured at an exhaust port to examine their formation mechanisms and behaviors with fast response HC/NOx analyzers. In conclusion, the fast burning of fuel and improved combustion quality by enhanced charge motions reduced unburned HC emissions, and advancing the intake valve opening reduced HC as well as NOx. Furthermore, HCs during the cold transient phase and idle conditions decreased with recalibrated start parameters such as lean air-fuel ratio and spark retardation via the enhancement of intake charge motions.     

Predictive control of a vehicle trajectory using a coupled vector with vehicle velocity and sideslip angle

In this paper, a predictive algorithm for vehicle trajectory control using the vehicle velocity and sideslip angle is proposed. Since the driving state of a vehicle generates nonholonomic constraint equations, it is difficult to control the trajectory with a conventional control algorithm. Furthermore, control vectors such as vehicle velocity and sideslip angle are coupled together; hence, a separate control for each variable is not suitable. In this study, a coupled control vector that combines the velocity and sideslip angle is proposed for the predictive control of vehicle trajectory. Since the coupled control vector is derived from the status of the vehicle’s motion, it is easy to generate a feedback control vector for the predictive controller. The coupled vector cannot be directly used as input to the vehicle systems; therefore, the vehicle input vector should be calculated from the control vector using a nonlinear function. Since nonlinear functions are not inserted in the control loop, they are calculated by the controller. Therefore, this method does not require a linearization process in the control logic, which enhances the stability and accuracy of the predictive controller.     

Type synthesis of function-generating mechanisms for seat suspensions

Mechanisms with “negative” stiffness are a unique tool used to significantly improve vibration isolation for a vehicle driver via upgrade of the seat suspension. However, connection of such mechanisms to the suspension results in errors in the function generation process, and in most cases, makes motion impossible. An approach to type synthesis is presented in order to make this process more predictable, easy and thus more practical for the upgrade process. Structural classification of the suspensions is presented, and -an atlas of function-generating mechanisms for suspensions that reveals the effect of “negative” stiffness is completed. All of the function-generating mechanisms appear in the atlas as result of enumeration. Structural properties of novel and existing mechanisms are compared. Finally, some advantages in practical use of novel suspensions with “negative” stiffness are illustrated.     

Demand forecasting of diesel passenger car considering consumer preference and government regulation in South Korea

Changing market regulations in South Korea have allowed diesel-fueled passenger cars in the domestic market. The diffusion of diesel cars is tied to issues of environmental impact, energy supply and demand, and changes in tax revenue. Policymakers can influence demand for diesel vehicles to protect social welfare and to observe international environmental protection laws. On the supply side, carmakers need to know consumer preferences regarding new vehicles to arrive at development strategies.This study uses microsimulated demand forecasting to address these issues and predict consumer demand for diesel passenger cars. The model accommodates governmental policies and car attributes such as price and engine efficiency. We find that consumers will likely prefer diesel passenger cars to gasoline ones due to the low operation costs of the former in spite of high purchase price when diesel is relatively cheaper than gasoline. Finally we find that diesel passenger cars will capture a 42% market penetration ratio under the pricing system suggested by the Ministry of Environment of Korea.     

Equity based land‐use and transportation problem

Due to additional trip production by land use development, the O‐D travel costs between some O‐D pairs may also change intuitively. This leads to positive and negative impacts on network users traveling between different O‐D pairs. Therefore the equity issue about the benefit distribution gained from the land‐use development problem is raised. This paper proposes an Equity based Land‐Use Transportation Problem (ELUTP) which is intended to examine the benefit distribution among the network users and the resulting equity associated with land‐use development problem in terms of the change of equilibrium O‐D travel cost. In the resulting bi‐level programming model, the upper level sub‐problem maximizes traffic production incorporating equity constraints, while the lower level sub‐problem is a combined trip distribution/assignment user equilibrium problem. Genetic algorithm based method is applied to test the models using an example network.     

Importance of traveler attitudes in the choice of public transportation to work: findings from the Regional Transportation Authority Attitudinal Survey

The commute mode choice decision is one of the most fundamental aspects of daily travel. Although initial research in this area was limited to explaining mode choice behavior as a function of traveler socioeconomics, travel times, and costs, subsequent studies have included the effect of traveler attitudes and perceptions. This paper extends the existing body of literature by examining public transit choice in the Chicago area. Data from a recent Attitudinal Survey conducted by the Regional Transportation Authority (RTA) in Northeastern Illinois were used to pursue three major steps. First, a factor analysis methodology was used to condense scores on 23 statements related to daily travel into six factors. Second, the factor scores on these six dimensions were used in conjunction with traveler socioeconomics, travel times, and costs to estimate a binary logistic regression of public transit choice. Third, elasticities of transit choice to the six factors were computed, and the factors were ranked in decreasing order of these elasticities. The analysis provided two major findings. First, from a statistical standpoint, the attitudinal factors improved the intuitiveness and goodness-of-fit of the model. Second, from a policy standpoint, the analysis indicated the importance of word-of-mouth publicity in attracting new riders, as well as the need for a marketing message that emphasizes the lower stress level and better commute time productivity due to transit use.     

Public preference for the attributes of the marina port in Korea: a choice experiment study

As of late, the Korean government needs quantitative information on economic feasibility analysis for marina port development projects. This study applies a choice experiment to measure public preference for the attributes of marina port in Korea. We consider the trade-offs between price and four attributes of marina port (capacity, access, waterfront, and program) for selecting a preferred alternative and elicit the marginal willingness to pay (MWTP) estimates for each attribute. We also test whether irrelevant alternatives property for the estimation model holds and compare the estimation results of the multinomial logit (MNL) and the nested logit (NL) models. The results show that the NL model outperforms the MNL model. In the NL model, MWTPs for increasing the level of a waterfront from promenade to both promenade and rest area and for the provision of marine leisure experience program are KRW13 384 (USD11.8) and KRW17 937 (USD15.8), respectively. This study is expected to provide policymakers with quantitative information for evaluating marina port construction projects in Korea.     

Developing a conceptual model for sharing container terminal resources: a case study of the Gamman container terminal

It is an important matter closely connected with saving logistics costs, as well as encouraging national competitive power, to improve the productivity of container terminals by efficient utilization of container terminal resources. In this respect, this paper tries to suggest a conceptual model for sharing container terminal resources, taking as a case study the Gamman Container Terminal (GCT) in the port of Pusan. In so doing, it identifies what kinds of resources can be systematically shared from the viewpoint of their common use and draws some problems resulting from terminal operation by four operators at GCT. The model does not imply the conception that each terminal has its own resources individually, but recommends that tentatively-called Container Terminal Resource Management Center (CTRMC) should be established and operated in order to save operation and investment costs and improve operational efficiency. In addition, the continuous acquisition and life-cycle support (CALS) concept is imbedded in the model so that it can control the supply and demand of resources efficiently by sharing the database, through which the CTRMC can automatically identify the status of the excess or deficit of a certain resource in each berth at GCT.     

Requirement-based testing of an automotive ECU considering the behavior of the vehicle

HILS (Hardware In the Loop Simulation) and RBT (Requirement-Based Testing) are widely used to evaluate the performance and reliability of automotive ECUs (Electronic Control Units). The HILS method is used to predict the behavior of ECU-installed vehicles and to evaluate the performance of ECU controllers. RBT evaluates whether the embedded system satisfies the pre-defined requirements. In this study, the behavior of a vehicle is regarded as a system requirement, and an embedded system test procedure that evaluates the system requirement is proposed. In particular, a new method is introduced, which integrates HILS with RBT. Using the proposed method, the behavior of an articulated vehicle equipped with an AWS (All Wheel Steering) ECU is evaluated with RBT software.