Correlations between industrial demands (direct and total) for communications and transportation in the U.S. economy 1947–1997

Using input–output (I–O) accounts provided by the U.S. Department of Commerce, this study investigates the aggregate relationships between the transportation and communications inputs demanded (directly and in total) by all industries in the U.S., and compares the results across time. We analyzed five pairs of Spearman correlations of transportation and communications demands (utilities, manufacturing, and overall) using the direct and total coefficient tables from the ten benchmark input–output years spanning 1947 to 1997. To correctly represent the overall economy-wide relationship, each industry (direct table) or commodity (total table) in the correlation was weighted proportionately to the monetary value of its contribution to the U.S. economy. In the analysis using direct I–O coefficients, we found a pattern of predominant complementarity between transportation and communications manufacturing, and substitution between transportation and communications utilities. There are intriguing indications, however, of a shift from substitution to complementarity in the latter case, beginning around 1987. In the analysis using total I–O coefficients, we found a pattern of complementarity for all years between transportation and communications manufacturing, and a pattern changing from substitution to complementarity for the remaining four pairs (transportation manufacturing and communications utilities; transportation utilities and communications manufacturing; the utilities pair; and the overall pair). Thus, from the industrial perspective (which constitutes a sizable proportion of the total demand for communications and transportation), it is not realistic in modern times to expect telecommunications to substitute for travel. Nevertheless, further research is needed into the specific causes of the observed shift from substitution to complementarity, and current trends should continue to be monitored for any changes.

Crashworthiness of chromium plated plastic radiator grille

The use of plastic in vehicle development has increased. In particular, a design trend has resulted in chromiumplated plastics being used in exterior panels. Recently, as the appearance has become more important in design, the plastic radiator grille has become larger, to where it can become the primary member when a front collision happens. The radiator grille should be designed with considerations of the geometric structure, such as delamination, and material characteristics, when plastics are plated with chromium. The enlarged grille has to pass regulations like FMVSS Part 581. Although the material property of plastic has been studied before, what seems to be lacking is study on the crashworthiness of plastic radiator grilles that are plated using chromium. In this paper, in order to evaluate the crashworthiness, tensile test and front collision analysis using finite element method are performed. Tensile test is conducted with 4 types of materials, and then material properties of chromium-plated plastics are obtained. Meanwhile radiator grille’s crashworthiness is evaluated using finite element analysis method. Analysis result is evaluated according to failure criterion. Through this study, method of the assessment of plastic radiator grille’s crashworthiness considered material properties of chromium plated plastics is proposed, and it can be predicted the delamination and the failure point of radiator grille at the design step.     

Effect of tumble-home on roof strength of a vehicle

This study reports on the effect of vehicle tumble-home (side body inclination) on roof strength. The steep inclination of the side body of a vehicle increases its roof strength. Comprehensive analysis of the impact of high roof strength driven by the steep inclination on dynamic roof strength in rollover is described. Here, we have developed a numerical model using the ADAMS, which is capable of characterizing both of the static and the dynamic roof strength. According to the FMVSS 216 protocol, we achieve the strength to weight ratio (SWR; static roof strength) by applying loading plates to the roof of a vehicle. The Controlled Rollover Impact System (CRIS) allows us to quantitatively characterize the displacements of the top end of A-pillar and B-pillar, thus determining the dynamic roof strength by comparing the results. We demonstrated that the roof intrusion was one of the most critical causes which lead to injuries of occupants fastening seat belts. Our analysis revealed that the increase of the side body inclination of vehicles enhanced the static roof strength whereas it could not reduce the roof displacement (intrusion) in the dynamic rollover.     

Loosening analysis for fastening screw of automotive door trim parts

While a screw is a fastening element that can tighten the two parts at low cost, the loosening of the screw is generated due to external forces such as repetitive load, vibration, and thermal stress. This phenomenon decreases the initial clamping force, and this can be a serious problem to the safety of the product. However, while fastening parts are handled through experiment and experience, there is a lack of research on the screw loosening of plastic fastening parts. For example, vehicles have various fastening parts. Among the fastening elements, screws are typically used for tightening parts of the vehicle door trim. Vehicle interior materials are mainly composed of plastic parts. Especially, the temperature of the vehicle interior changes from a sub-zero temperature to 100 degrees (°C) due to solar radiation. Unlike metals, plastic materials are commonly susceptible to the environment. In this study, the fastening screw of automotive door trim parts is selected. First, a screw loosening mechanism is implemented through Computer Aided Engineering (CAE) analysis and the influences of degradation are then analyzed. Secondly, the selecting method of clamping force is suggested through the analysis result of reduction according to the tightening torque.     

Generation of synthetic datasets for discrete choice analysis

Despite the widespread use of synthetic data in discrete choice analysis, little is known about how the methodology used to generate synthetic datasets influences the properties of parameter estimates and the validity of results based on these estimates. That is, there are two potential sources of biases when using synthetic discrete choice data: (1) bias due to the method used to generate the dataset; and, (2) bias due to parameter estimation. The primary objective of this study is to examine bias due to the underlying data generation method. This study compares three methods for generating synthetic datasets and uses design of experiments and analysis of variance methods to investigate the ability to recover estimates for “true” logsum parameters for nested logit models. The method that uses nested logit probabilities to generate the chosen alternative results in unbiased parameter estimates. The method that is based on Gumbel error component approximations reveals that while the error components themselves are unbiased, subtle empirical identification problems can arise when these error components are combined with synthetically generated utility functions. The method that is based on normal error component approximations reveals that all logsum coefficients are biased upwards; the bias dramatically increases for those nests that have a low choice frequency and is most pronounced for those nests with high correlations among alternatives. Based on the results of the analysis, several recommendations for the generation of synthetic datasets for discrete choice analyses are provided.     

Development of a mobile welding robot for double-hull structures in shipbuilding

This paper describes the development of a self-driving mobile welding robot. The robot is used to weld U-shaped welding areas in enclosed double-hull structures. In order to place itself inside the double-hull structure, the robot is capable of passing through an access hole 600 mm wide and 800 mm high. This research addresses the mechanical and control systems of the robot. The mechanical system of the robot consists of an eight-axis mobile platform, and a six-axis welding unit. The control system consists of a main controller, a welding machine controller (arc sensor board), and seam tracking sensors, i.e., a touch sensor, a laser sensor, and an arc sensor. To reduce the number of cables that would be dragged by the welding robot, the main controller is designed as an embedded type that is mounted on the back of the mobile platform.     

一点欣慰 一点遗憾——大众新宝来C-NCAP碰撞试验点评

大众宝来,作为一款典型的德系紧凑型轿车,自2001年在中国上市以来,凭借其出色的制造工艺,灵活的操控性,高速行驶的稳定性,被消费者誉为“驾驶者之车”,并拥有了一大批忠实的拥趸,累计销量超过了37万辆。2008年10月,新款宝来隆重登场,尽管开始的几个月市场表现一直没有太多亮点,但2009年3月,新宝来的月销量猛蹿到10240辆,充分证明了这款在中国有着传统根基的德系车仍然有着不少的“粉丝”。     

Instantaneous 2-D visualization of spray combustion and flame luminosity of GTL and GTL-biodiesel fuel blend under quiescent ambient conditions

An experimental study has been performed on spray combustion and two-dimensional soot concentration in diesel (ULSD), GTL and GTL-biodiesel fuel jets under high-pressure, high-temperature quiescent conditions. Instantaneous images of the fuel jets were obtained with a high-speed camera. It was confirmed that by blending GTL with 20% rapeseed biodiesel, certain fuel properties such as kinematic viscosity, density, surface tension, volatility, lower heating value and others may be designed and improved to be more like those of conventional diesel fuel but with considerable decrease in the amount of sulfur, PAH, cold filter plugging point, etc. The results showed that the spray tip penetration increased and the spray cone angle decreased when 20% biodiesel fuel was added to GTL fuel. Autoignition of the GTL-biodiesel blend occurred slightly earlier than that of diesel fuel. Experiments under high-pressure, high-temperature conditions showed that higher injection pressure induced a lower soot formation rate. The integrated flame luminosity, which serves as an indicator of soot concentration in the fuel jet, was slightly higher for the GTL-biodiesel blend than for pure GTL fuel due to the slightly higher sulfur content of pure biodiesel fuel.     

The Causal Effects of Place Attachment and Tourism Development on Coastal Residents' Environmentally Responsible Behavior

Coastal areas are generally known as high-usage areas for residential, recreational, and tourism purposes. Coastal residents, as well as local visitors, therefore, can play an important role in protecting coastal resources. The purpose of this study was to identify important factors that could promote residents' environmentally responsible behavior (ERB). The two concepts, place attachment and attitudes toward tourism development (ATTD), were included to verify causal relationships of ERB. For data analysis, confirmatory factor analysis (CFA) and structural equation modeling (SEM) were conducted. Study results showed that place identity fully mediated the relationship between place dependence and ERB. With respect to the two dimensions of ATTD, there was a positive relationship between perceived benefits and ERB, while perceived concerns mediated this relationship. To promote ERB, the study emphasized the importance of developing place identity by providing diverse economical, socio-cultural, and recreational coastal benefits. In addition, involving those residents, who are positively and negatively impacted by tourism development, in the process of sustainable tourism development will develop more effective sustainable development strategies by reflecting local residents' opinions and preferences.     

Comparison between a reanalyzed product by 3-dimensional variational assimilation technique and observations in the Ulleung Basin of the East/Japan Sea

Reanalyzed products from a MOM3-based East Sea Regional Ocean Model with a 3-dimentional variational data assimilation module (DA-ESROM), have been compared with the observed hydrographic and current datasets in the Ulleung Basin (UB) of the East/Japan Sea (EJS). Satellite-borne sea surface temperature and sea surface height data, and in-situ temperature profiles have been assimilated into the DA-ESROM. The performance of the DA-ESROM appears to be efficient enough to be used in an operational ocean forecast system.Comparing with the results from Mitchell et al. [Mitchell, D. A., Watts, D. R., Wimbush, M., Teague, W.J., Tracey, K. L., Book, J. W., Chang, K.-I., Suk, M.-S., Yoon, J.-H., 2005a. Upper circulation patterns in the Ulleung Basin. Deep-Sea Res. II, 52, 1617-1638.], the DA-ESROM fairly well simulates the high variability of the Ulleung Warm Eddy and Dok Cold Eddy as well as the branching of the Tsushima Warm Current in the UB. The overall root-mean-square error between 100 m temperature field reproduced by the DA-ESROM and the observed 100-dbar temperature field is 2.1 °C, and the spatially averaged grid-to-grid correlation between the two temperature fields is high with a mean value of 0.79 for the inter-comparison period.The DA-ESROM reproduces the development of strong southward North Korean Cold Current (NKCC) in summer consistent with the observational results, which is thought to be an improvement of the previous numerical models in the EJS. The reanalyzed products show that the NKCC is about 35 km wide, and flows southward along the Korean coast from spring to summer with maximum monthly mean volume transport of about 0.8 Sv in August–September.