A review of the Effect of α/W ratio on fracture toughness （Ⅱ） experimental investigation in LEFM

In part I of this series, experimental investigation in EPFM （elastic-plastic fracture mechanics） had been discussed. In this paper, experimental investigation in LEFM （ linear elastic fracture mechanics） is given. Fracture toughness tests had been carried out on three different strength steels, using both through-cracked specimens with different α/W ratio and semi-elliptical cracked specimens with variable crack size and shape. Results show that the fracture toughness KIC increases with decreasing α/W when α/W 〈 0.3 for three-point-bend specimens, and that for α/W 〉 0.3, it is independent of α/W. Shallow crack specimens, both through-cracked and surface-cracked, gave markedly higher values than deeply notched specimens. However, the effect of crack shape on fracture toughness is negligible. Results also show that the LEFM approach to fracture is not tenable for design stresses where αc is often very small, far less than 2.5 （ KIC/σy）^2.     

Regional impacts of new transport infrastructure: a multisectoral potentials approach

This is the second of two background papers sponsored for the Symposium by the Administrative Commission for the north of the Netherlands. Its purpose is to provide an indication of the effects of the proposed high speed rail line between Amsterdam, Groningen and Hamburg on employment in the corridor. The authors first review the techniques of forecasting these effects discussed in the literature. The potentials approach is adopted for their analysis, the mathematics and underlying assumptions of which are presented. Finally, this model is run to provide an estimate of the impact on regional employment of three variants of the proposed rail line.     

The design of bus route systems — An interactive location-allocation approach

An interactive modelling approach is developed to solve the practical problem of bus route network design. Possible bus routes are identified with facilities which can be located. Zones or pairs of zones in the urban area are identified with customers who will be allocated to the established facilities. It is shown that the classical Set Covering Problem is useful under the assumption of fixed demand; the Simple Plant Location Problem is effective under the assumption of demand which is sensitive to the level of bus service provided.     

铁路隔震连续梁桥地震碰撞响应研究

在地震作用下隔震桥梁的梁体位移比非隔震桥梁明显增加,使得相邻梁发生碰撞的概率增大。以1联3跨铁路隔震连续梁桥为例,选用3条人工地震波,采用非线性时程分析方法进行该桥的碰撞响应分析,研究梁间伸缩缝宽度和隔震支座刚度对梁间碰撞响应的影响。结果表明:随着伸缩缝宽度的增大和隔震支座刚度的增大,相邻梁碰撞的发生次数和碰撞力均有明显减小;地震作用下隔震固定墩墩底最大弯矩和最大剪力均随着隔震支座刚度的增加而增加。因此,在进行隔震桥梁设计时,应综合考虑隔震支座的隔震效果和碰撞响应,从而得到既经济又安全的隔震桥梁设计参数。     

基于混合通信顺序进程的高速铁路列控系统形式化建模与验证方法

针对高速铁路列控系统的混杂特性,提出一种基于混合通信顺序进程(HCSP)的列控系统形式化建模与验证方法。引入了HCSP的假设条件,建立列控系统的行为模型;定义了HCSP到混合自动机(HA)的转换规则,将HCSP模型转换成HA模型;利用模型检验工具PHAVer对HA模型进行自动验证。以高速铁路列控系统典型的行车许可运营场景为例,建立区间闭塞分区行车许可场景的HCSP模型;根据转换规则将行车许可场景的HCSP模型转换成HA模型;用PHAVer验证了所建立的区间闭塞分区行车许可场景模型的正确性,从而证明了基于HCSP的高速铁路列控系统建模及验证方法的有效性。     

Micro-Grinding Performance of Hard-Brittle Chip Materials in Precision Micro-Grinding Microgroove

The micro-structure on hard-brittle chip materials (HBCMs) surface can produce predominant functions and features. The micro-grinding with diamond wheel micro-tip is an efficient method to machine microstructure on HBCMs. However, different HBCMs and crystal orientation may have a significant influence on the micro-grinding performance. In this paper, the micro-grinding performance along different crystal orientation of HBCMs is investigated. First, a dressed 600^# diamond grinding wheel is used to micro-grind micro-structure on HBCMs. Then, the experiment of micro-grinding force test is completed. Finally, the quality of microgroove, the grinding ratio and the micro-grinding force are investigated and they are related to the crystal orientation of HBCMs. It is shown that the stronger resistance to the micro-crack propagation has the best quality of microgroove and the smallest grinding ratio. Moreover, the hardest single-crystal SiC has the best machinability and the micro-grinding force is 38.9%, 10.8% and 46.8% less than the one of sapphire, single-crystal Si and quartz glass, respectively. The direction to micro-grind easily is the crystal orientation 〈10\(\overline 1 \)0〉 for single-crystal SiC and sapphire. In addition, the micro-grinding force increases with the increase of the micro-grinding depth and feed rate and decreases with the increase of the grinding wheel speed.     

Lattice-based group signature with verifier-local revocation

Among several post quantum primitives proposed in the past few decades, lattice-based cryptography is considered as the most promising one, due to its underlying rich combinatorial structure, and the worst-case to average-case reductions. The first lattice-based group signature scheme with verifier-local revocation(VLR) is treated as the first quantum-resistant scheme supported member revocation, and was put forward by Langlois et al. This VLR group signature(VLR-GS) has group public key size of O(nm log N log q), and a signature size of O(tm log N log q log β). Nguyen et al. constructed a simple efficient group signature from lattice, with significant advantages in bit-size of both the group public key and the signature. Based on their work, we present a VLR-GS scheme with group public key size of O(nm log q) and signature size of O(tm log q). Our group signature has notable advantages: support of membership revocation, and short in both the public key size and the signature size.     

富水砂层盾构始发井防涌水检测与加固

基于广州地铁6号线大坦沙站盾构始发井的实践,研究富水砂层中破除盾构井端头门时防涌水的施工监测和工程检测方法,根据检测和监测结果,基于朗金土压力理论进行计算分析,提出相应的加固措施和方法。介绍了具体的防水加固措施和效果。     

激光堆焊工艺在修造领域的应用现状及发展趋势

本文详细阐述了激光堆焊工艺在工业修造领域的应用现状及发展趋势,介绍了激光束的能源、输送和聚焦系统、堆焊材料及激光设备。重点说明了其在修造领域的应用工艺。     

Use and perceptions of a real time passenger information system

The use of high-technology systems in the transport sector has increased steadily over recent years. This paper outlines the development of vehicle monitoring and control systems and their use in the public transport arena. The paper shows how one such system, that operated by Datatrak Ltd., has been adapted to provide a real time passenger information system for the RiverBus Partnership in London.

1 The RiverBus service described in this article ceased operation in August 1993. The collapse of the RiverBus Partnership followed the financial difficulties surrounding Olympia and York, developers of Canary Wharf in London Docklands.

Passenger use and perception of the system is evaluated, based on surveys of RiverBus users. This provides an evaluation of the system, and highlights the importance of introducing such systems based on user information needs and as part of the total marketing package.