Parameter transfer of common-metric attributes in choice analysis: implications for willingness to pay

There is a growing literature that promotes the presence of a mix of compensatory and semi-compensatory processing strategies in the way that individuals evaluate packages of attributes in real or hypothetical markets, and make choices. This paper proposes a specification for the utility form in a choice model to test if, given a pair of attributes with a common-metric (e.g., components of travel time or cost), the attribute with the dominating level defines the marginal (dis)utility that is assigned to both attributes. We refer to this processing strategy as a parameter transfer rule. We use a stated choice data set, in the context of car driving individuals choosing between tolled and non-tolled routes, to estimate a mixed logit model which incorporates the presence of the parameter transfer rule and the conventional fully compensatory rule, both existing up to a probability. We find that if this parameter transfer heuristic is part of the mix, the WTP is more than 30% higher, on average, than when only a fully compensatory rule is imposed. We also contrast the parameter transfer rule with other semi-compensatory heuristics which have been investigated in other papers, and show that the finding adds further support to the accumulating evidence that a semi-compensatory attribute processing rules tend to result in higher mean WTP estimates compared to the fully compensatory attribute processing rule.     

Socio-demographic and built environment influences on the odds of being overweight or obese: The Atlanta experience

This paper explores the association of socio-demographic and built environment characteristics on the odds of being overweight and obese using data from the Atlanta SMARTRAQ travel survey. A new methodological framework based on a multinomial logit (MNL) model and an enhanced odds ratio plot is presented. The use of an MNL model overcomes limitations of many prior studies that employ a sequence of binary logit models to examine multiple weight categories. The use of an enhanced odds ratio plot provides important information into the relative importance of socio-demographic and built environment characteristics. Several new findings for the Atlanta area result from this study. Socio-demographic variables, including age and educational attainment, exhibit a non-linear relationship with the odds of being overweight or obese. Gender, age, ethnicity, and educational attainment are strongly associated with the odds of being overweight or obese, while income and number of students between 5 and 16 years old in the household have smaller effects. Built environment characteristics such as increased net residential densities and enhanced street connectivity are associated with reductions in the odds of being overweight and/or obese. Relative to socio-demographic variables, however, such built environment characteristics have a much smaller impact on describing the odds of being overweight or obese.     

Net tax incidence for urban public transit subsidies in New Zealand

This paper examines the impact of policy changes in the funding of New Zealand public transit modes.These changes, introduced in 1983, are evaluated in terms of the net incidence of public transit subsidy assistance, taking into account its source of funding and the income class of those commuters benefiting from the subsidy. The general conclusion is that the net incidence of subsidy assistance remains progressive (i.e., a transfer from high to low income commuters) following the introduction of shared funding on the predominant public transit modes (rail and bus), sourced from income tax (central government) and property tax (regional/local government). However, because of the predominance of medium to high income commuters on rail vis-a-vis bus and the traditional source of funding on these modes in terms of income tax (a progressive tax source) and property tax (a regressive tax source), the degree of progressivity previously associated with public transit subsidies has now substantially reduced.The analysis and opinions expressed in this paper are the responsibility of the author alone and do not purport to represent the views of the Ministry of Transport.     

Assessing the CO2 impact of current and future rail track in the UK

This paper investigates the CO₂ impact of current and future UK rail track and estimates the material, process and transport emissions associated with construction, maintenance and end-of-life activities for designs at high and low traffic loads. Analysis shows that for current track configurations, track with concrete sleepers has the lowest CO₂ impact, followed by steel, hardwood and softwood. Several potential future rail track designs have been analysed including embedded rail and double and quadruple-headed rail. All future track designs have a lower impact than current designs, but this improvement is more marked at high traffic loads. Up to a 40% reduction in CO₂ impact could be achieved if the UK rail network was to move from conventional track design to a double-headed embedded rail design. Key levers for reducing the CO₂ impact of track are identified as service life extension, traffic load reduction and the selection of low impact track designs.     

Off-set crack propagation analysis under mixed mode loadings

An assessment was carried out herein to study the eccentricity of cracks subjected to mixed-mode loadings. Several loading locations relative to a central line were selected to induce mixed-mode loadings, which were computed using a finite element method. An adaptive meshing technique was adopted during the simulation of crack propagation to ensure the singularity of stress at the tip of the crack. The stress intensity failure criterion was used and programmed, and the node splitting technique was used when the stress intensity factor reached the fracture toughness of the material to simulate crack propagations. It was found that large variations in the stress intensity factor were observed when off-set cracks were used, and that K _II decreased when loading distance increased, but increased when the off-set crack distance was increased. Both crack eccentricity and loading distance played important roles in producing mixed-mode loading, compared to the influence of central cracks. Correction factors were introduced to modify the calculation of stress intensity factors under mixed-mode loadings. Simulations of crack propagation were also conducted to study the effects of crack eccentricities and loading distances. It was found that the crack length, the loading distance relative to the central crack and the crack eccentricity dominated calculations of the integrity of cracked structures.     

Sampling of alternatives for route choice modeling

This paper presents a new paradigm for choice set generation in the context of route choice model estimation. We assume that the choice sets contain all paths connecting each origin–destination pair. Although this is behaviorally questionable, we make this assumption in order to avoid bias in the econometric model. These sets are in general impossible to generate explicitly. Therefore, we propose an importance sampling approach to generate subsets of paths suitable for model estimation. Using only a subset of alternatives requires the path utilities to be corrected according to the sampling protocol in order to obtain unbiased parameter estimates. We derive such a sampling correction for the proposed algorithm.Estimating models based on samples of alternatives is straightforward for some types of models, in particular the multinomial logit (MNL) model. In order to apply MNL for route choice, the utilities should also be corrected to account for the correlation using, for instance, a path size (PS) formulation. We argue that the PS attribute should be computed based on the full choice set. Again, this is not feasible in general, and we propose a new version of the PS attribute derived from the sampling protocol, called Expanded PS.Numerical results based on synthetic data show that models including a sampling correction are remarkably better than the ones that do not. Moreover, the Expanded PS shows good results and outperforms models with the original PS formulation.     

Development of a semi-empirical friction model in automotive driveshaft joints

High speed and sport utility vehicles with large joint articulation angle demand lower friction in automotive driveshaft joints to meet noise and vibration comfort levels. Thus a more thorough understanding of internal friction characteristics and mechanisms is required. In this paper, a friction model in automotive driveshaft joints was developed through the use of test data from an instrumented Constant Velocity (CV) joint friction apparatus with actual driveshaft assemblies. Experiments were conducted under different realistic operating conditions of oscillatory speeds, CV joint articulation angles, lubrication, and torque. The experimental data was used to develop a physics-based semi-empirical CV joint internal friction model as a function of different CV joint operating parameters. It was found that the proposed friction model captures the experimental results well. Also the friction model estimates the generated axial force (GAF) in tripod CV joints well, which is the main source of force that causes vehicle vibration problems.     

Interval estimation in the calibration of certain trip distribution models

This paper argues for interval, rather than point, estimation when calibrating some variants of the trip distribution “gravity” models. Analytic expressions are derived for the approximate asymptotic covariances of least squares and maximum likelihood estimates of the parameters in the impedance function under a variety of conditions. A comparative numerical example, and an application using migration flows, are also presented.     

考虑稳健性的汽车结构耐撞性优化设计

本文中基于C-NCAP中40%重叠度的偏置碰撞工况对某轿车进行结构耐撞性优化。为提高输出响应的预测精度,使用基于粒子群算法优化的支持向量回归模型来拟合设计变量与输出响应之间的关系,并利用非支配排序多目标遗传算法Ⅱ获得该优化问题的Pareto前沿。在确定性优化的基础上,并考虑产品性能在不确定因素影响下的波动,对其进行稳健性优化设计。最后,对优化结果进行有限元仿真验证。结果表明:优化后,结构质量减轻,耐撞性能明显提升,同时保障了稳定的产品性能。     

Development of a low-noise cooling fan for an alternator using numerical and doe methods

An alternator, which converts mechanical rotational energy into electrical energy, is an important component of a vehicle. Alternators operate over a broad range of rotational speeds, typically from 3,000 RPM to 18,000 RPM, which demands a cooling fan producing sufficient airflow, ideally with a minimum of noise. In the current study, an optimized alternator-cooling fan was developed through a linked DOE(Design OF Experiment) process and numerical analysis. The SC/Tetra and FlowNoise S/W programs were used to calculate flow rates and noise levels, respectively, for the newly developed fan. Compared with original model, the numerical results predicted a 3 dBA noise reduction; the measured reduction was 4 dBA.