Scene Simulation of Bridge Collapse Based on Finite Element Analysis and Virtual Reality Technology

为准确、真实、完整的重现桥梁垮塌事故过程,研究了结合有限元垮塌分析和虚拟现实技术的桥梁垮塌场景模拟方法.在MSC.Marc中完成了桥梁垮塌有限元分析.基于该有限元分析数据,设计了桥梁垮塌场景模拟的系统架构,并提出了一套基于图形引擎OpenSceneGraph (OSG)和物理引擎PhysX的桥梁垮塌动画和特效的技术流程,在OSG平台上开发了基于有限元分析数据的桥梁垮塌场景模拟系统.以某石拱桥为例,展示了基于本系统的桥梁垮塌过程以及碎块、烟尘等效果.并与有限元垮塌分析的图形结果进行了对比.结果表明:基于本系统的桥梁垮塌场景模拟具有与有限元模拟相同的准确性,同时更具有真实感和丰富的场景内容.桥梁垮塌场景模拟准确而真实的还原了桥梁垮塌事故场景,可以用于桥梁垮塌事故鉴定辅助分析.     

西藏复杂地质环境下路基加宽拼接方案试验研究

针对西藏某公路的加宽改造,提出了5种新旧路基加宽拼接方案.按这5种方案,共修筑了3段试验路.对试验路的设计原则、施工要求和工艺进行了讨论.通过试验数据,对各种拼接方案的效果进行了比较分析.结果表明,用5层双向土工格栅自路基顶面向下,以层间距30 cm的加筋方式加强新旧路基间的结合是较好的路基加宽拼接方案.     

On-road visual vehicle tracking using Markov chain Monte Carlo particle filtering with metropolis sampling

In this study, a method for vehicle tracking through video analysis based on Markov chain Monte Carlo (MCMC) particle filtering with metropolis sampling is proposed. The method handles multiple targets with low computational requirements and is, therefore, ideally suited for advanced-driver assistance systems that involve real-time operation. The method exploits the removed perspective domain given by inverse perspective mapping (IPM) to define a fast and efficient likelihood model. Additionally, the method encompasses an interaction model using Markov Random Fields (MRF) that allows treatment of dependencies between the motions of targets. The proposed method is tested in highway sequences and compared to state-of-the-art methods for vehicle tracking, i.e., independent target tracking with Kalman filtering (KF) and joint tracking with particle filtering. The results showed fewer tracking failures using the proposed method.     

High-strain-rate fracture of adhesively bonded composite joints in DCB and TDCB specimens

Double-cantilever beam (DCB) and tapered double-cantilever beam (TDCB) specimens are the test configurations most commonly used to measure the fracture toughness of composites and adhesive joints. Strain rates of 1 to 18.47 m/s were applied to the test specimens via high-speed hydraulic test equipment. Because the fracture occurs through the adhesively bonded joints and the cracks grow rapidly, the crack length and beam displacement were recorded by a high-speed camera. An energy range from 0 to 10 J was often observed in the high-strain-rate fracture experiments for nonlinear plastic behavior of the dynamically loaded adhesively bonded DCB and TDCB specimens. The range of energy release rates (fracture energy) for TDCB specimen was 2 to 3 times higher than that of a DCB specimen for all high strain rates. The fracture energy of automotive adhesive joints can be estimated using the experimental results in this study for the fracture toughness (G_IC) under high rates of loading. The crack grows as the applied fracture energy exceeds the value of the critical energy release rate (G_IC) at the crack tip. The energy release rate was calculated using the fracture mechanics formula. The key fracture mechanics parameter, the fracture energy GIC, was ascertained as a function of the test rate and can be used to assess and model the overall joint performance.     

A fundamental investigation of tilt control systems for narrow commuter vehicles

One way of addressing traffic congestion is by efficiently utilizing the existing highway infrastructure. Narrow tilting vehicles that need a reduced width lane can be part of the solution if they can be designed to be safe, stable, and easy to operate. In this paper, a control system that stabilizes the tilt mode of such a vehicle without affecting the handling of the vehicle is proposed. This control system is a combination of two different types of control schemes known as steering tilt control (STC) and direct tilt control (DTC) systems. First, different existing variations of both STC and DTC systems are considered and their shortcomings analysed. Modified control schemes are then suggested to overcome the deficiencies. Then a new method of integrating these two control schemes that guarantees smooth switchover between the controllers as a function of vehicle velocity is proposed. The performance of the proposed STC, DTC, and integrated systems is evaluated by carrying out simulations for different operating conditions and some experimental work. The design of a second-generation narrow tilting vehicle on which the developed control system has been implemented is presented.     

Transient characteristics of emissions during engine start/stop operation employing a conventional gasoline engine for HEV application

In this paper, we investigate the transient characteristics of combustion and emissions during engine start/stop operations in hybrid electric vehicle (HEV) applications. Hydrocarbon (HC) emissions during the initial 2^nd∼9^th cycles are found to be significantly greater when the engine is quickly started under the original engine calibration mode. Lower intake manifold absolute pressure (MAP) was also found to cause larger residual gas dilution and poor combustion, resulting in a higher HC concentration when the cranking speed was increased. The post-catalyst HC concentration was found in the way of initially decrease and then to increase again as the cranking speed was increased. A lowest concentration value was achieved at a cranking speed of 1000 r/min. Engine shut-down by fuel cut-off was shown to produce lower emissions than shut-down by ignition cut-off as one can avoid misfire of the last fuel injection cycle. The fuel deposited during the stop process seems to impact engine restart enrichment mostly during the initial 0.7 s for this engine, whose performance is dominated by the MAP transition characteristic and the time coefficient for fuel vaporization in this time period     

柴油机曲轴有限元计算与台架试验数据对比分析

目前，国内柴油机行业普遍使用的曲轴弯曲疲劳强度试验台架，均采用音叉共振板结构。该试验台架对于大多数常规结构曲轴的连杆轴颈圆角疲劳强度的测定是比较准确的，但对于有些特殊结构曲轴的试验，却未能取得理想结果。以某曲轴台架试验、台架仿真模型及有限元计算模型数据为基础，分析对比了不同模型数据的差异及产生原因。     

汽车动力总成三点式悬置系统的设计方法探讨

首先分析汽车动力总成一悬置系统的振动激励、质量矩阵、刚度矩阵各元素的特点及其相互关系,阐释了系统弹性解耦设计的理论基础和重要性。然后根据动力总成一悬置系统刚度矩阵各元素的解析表达式,应用V形悬置组的弹性解耦原理,论述了目前普遍应用的三点式悬置系统在弹性解耦设计方面的问题,提出了悬置布置设计匹配的有效方法。