Air Cored Rogowski Coil for Measurement of Partial Discharges

A Rogowski coil was designed to measure partial discharge (PD) signal with low currents and high frequency. The possibilities of obtaining better measurements of PDs were explored by changing the inductance, mutual inductance, resistance, and capacitance of the coil. The designed Rogowski coil was calibrated under square wave voltage and arbitrary sine wave voltage. Then, according to the parameters of the Rogowski coil, the effect of changing some of these variables was simulated using a bode plot. Compari...     

Influence of Ca Element on Microstructure and Mechanical Properties of AZ61-1.2Y

The effects of Ca element on the microstructure and mechanical properties of AZ61-1.2Y alloy were investigated by microstructure observation, tensile tests and fracture analysis. The results show that, with the addition of Ca element, the microstructure of AZ61-1.2Y was obviously refined, high melting point Al2Ca intermetallic compound formed, and β-Mg17Al12 phase disappeared. With 1.0% Ca addition, the values of tensile strength at 25, 150 and 175 ℃ reached their maxima simultaneously, 225, 182, and 175 MP...     

Application of On-Line Rail Milling in Rail Maintenance of High-Speed Railways

On-line rail milling technologies have been applied in rail maintenance, and are proving to be efficient and environmental friendly. Based on the field data of on-line rail milling, a program for comparing rail transverse profiles before and after milling was designed and the root mean square (RMS) amplitude of longitudinal profile was calculated. The application of on-line rail milling technology in removing rail surface defects, re-profiling railhead transverse profiles, smoothing longitudinal profiles and improving welding joint irregularity were analyzed. The results showed that the on-line rail milling technology can remove the surface defects at the rail crown and gauge corner perfectly, re-profile railhead transverse profile with a tolerance of -1.00.2 mm , improve longitudinal irregularity of rail surface, with the RMS amplitude of irregularity reduced more than 50% and the number of out-of-limited amplitude reduced by 42%82% in all wavelength ranges. The improvement of welding joint irregularity depends on the amount of metal removal determined by the milling equipment and the primal amplitude.     

公路工程投标技巧及注意事项

对整个投标过程中所应注意的重点问题进行了分析和总结。从资格预审到招标文件购买后,消化、吃透标书,重点注意合同条件、材料设备和施工技术、工程范围和报价等方面问题,特别是在工程报价的过程中应掌握好工程量、单价、费率这三大要素,对提高单位中标率起很大作用。     

浅谈土的变形特性

土的力学性质研究是建立在三大力学基础之上,但又因为土的多相性、散体性和自然变异性,使其与金属材料有着本质的区别。在土的非线性、剪胀性、硬化与软化、应力路径和应力历史等方面分析了土有别于金属材料的变形特性。     

海洋真菌抗表皮葡萄球菌抗生素的初步研究

从海藻和海绵表面或组织内分离筛选出五株具有抑制表皮葡萄球菌活性的海洋真菌,分别鉴定为木霉属、光孢青霉、曲霉属、尖孢镰刀霉和交链格孢霉.经单剂量法测定其每毫升发酵液抑制表皮葡萄球菌的效价分别相当于氨苄青霉素0.8单位、1.1单位、22.5单位、7.9单位和6.2单位.高效液相色谱分析显示这五株真菌的代谢产物具有较显著差异,抗菌活性生物自显影表明这些菌株的抗表皮葡萄球菌抗生素成分也呈现较高的多样性.化学显色试验表明其中一株曲霉菌DLEP2008001的最强活性成分可能为含有仲胺及羧基基团的甾体或三萜类化合物,而次强活性成分可能为含有仲胺基团的化合物.研究结果表明,作为抗表皮葡萄球菌后备药物的潜在来源,海洋真菌值得深入研究.     

时频分析在心电信号分析中的应用

从理论上研究了时频分析方法中的短时傅立叶变换和W inger-V ille分布,并对正常心电信号和心室纤维颤动心电信号进行了仿真试验.仿真结果表明,利用时频分析方法研究时变的非平稳信号的特征变化是有效的,可以为临床诊断提供更充分的诊断依据.     

市政道路中彩色沥青混凝土路面施工工艺控制

以邢台市南三环道路路面改造工程中两侧非机动车道彩色沥青混凝土路面施工为例．着重对彩色沥青混凝土路面的原材料选择、混合料拌和、施工工艺、工程检测及分析等进行全面阐述,有助于彩色沥青混凝土路面施工工艺的推广。     

冲击压实施工对路旁地下光缆影响的实验分析

为了研究冲击压实施工对路侧地下光缆的影响,以广东省道S249线坪乳公路大修改造工程为依托,首先对冲击压实处理旧水泥混凝土路面的作用机理及振动影响、通讯光缆的特性及铺设情况加以介绍;然后就冲击压实施工对道路两侧土路肩埋设的光缆的影响情况及所采取的保护措施进行阐述;最后通过现场检测证实了所采取的避让及保护措施是有效的,不会影响光缆的正常通讯。     

国内车用乙醇汽油的应用现状及尾气治理效果分析

通过介绍我国车用乙醇汽油的应用现状以及在汽车尾气治理方面取得的进展,分析其在我国推广应用过程中的困难．并指出车用乙醇汽油在使用过程中出现的一些问题及其应用前景,对车用乙醇汽油的应用推广具有积极的意义。