电子签名技术及其在公路工程管理中的应用

随着我国公路工程管理信息化程度的日益提高,传统签名方式已经成为阻碍工程项目信息化管理发展的瓶颈。本文在介绍电子签名技术的基础上,对电子签名技术在公路工程项目文档管理中的应用等问题做了探讨。     

某发动机缸盖碗型塞密封失效分析及解决案例研究

碗型塞又名堵塞,因碗型塞的结构相对简单,可靠性高,价格便宜,广泛应用于内燃机.通过碗型塞与孔的过盈配合,及密封胶双重作用进行密封,碗型塞作为发动机常见的水道,油道密封方式,常见问题主要为漏液,因其结构简单,漏液问题根因也常常容易忽视;文章主要围绕发动机碗型塞漏水问题整改进行了理论分析和试验验证,为问题解决提供参考.     

城市产业集聚区地下环路系统布局研究

随着城市用地的紧张及开发强度的增加,在新一轮城市开发中,直接连接地库的地下环路系统逐渐得到普及.为总结地下环路系统的适用性,基于国内实践经验提出一套因地制宜的地下环路系统规划思路.首先,基于国内规划建设案例,总结地下环路的多种布局模式及其适应性;其次,从城市、交通及用户角度,结合案例及实践经验,总结地下环路的规划要点及...     

某型直流充电柜温度场仿真

对某型直流充电柜满负载工况下温度场进行仿真,根据实验测量数据验证仿真结果准确性,成功完成了对充电柜温度场的建模仿真工作,并实现对初始模型的简化,为对整个充电站进行温度场建模仿真奠定了基础。     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

A signal-based fault detection and classification method for heavy haul wagons

This paper proposes a signal-based fault detection and isolation (FDI) system for heavy haul wagons considering the special requirements of low cost and robustness. The sensor network of the proposed system consists of just two accelerometers mounted on the front left and rear right of the carbody. Seven fault indicators (FIs) are proposed based on the cross-correlation analyses of the sensor-collected acceleration signals. Bolster spring fault conditions are focused on in this paper, including two different levels (small faults and moderate faults) and two locations (faults in the left and right bolster springs of the first bogie). A fully detailed dynamic model of a typical 40t axle load heavy haul wagon is developed to evaluate the deterioration of dynamic behaviour under proposed fault conditions and demonstrate the detectability of the proposed FDI method. Even though the fault conditions considered in this paper did not deteriorate the wagon dynamic behaviour dramatically, the proposed FIs show great sensitivity to the bolster spring faults. The most effective and efficient FIs are chosen for fault detection and classification. Analysis results indicate that it is possible to detect changes in bolster stiffness of ±25% and identify the fault location.     

A receding horizon sliding control approach for electric powertrains with backlash and flexible half-shafts

Active control of electric powertrains is challenging, due to the fact that backlash and structural flexibility in transmission components can cause severe performance degradation or even instability of the control system. Furthermore, high impact forces in transmissions reduce driving comfort and possibly lead to damage of the mechanical elements in contact. In this paper, a nonlinear electric powertrain is modelled as a piecewise affine (PWA) system. The novel receding horizon sliding control (RHSC) idea is extended to constrained PWA systems and utilised to systematically address the active control problem for electric powertrains. Simulations are conducted in Matlab/Simulink in conjunction with the high fidelity Carsim software. RHSC shows superior jerk suppression and target wheel speed tracking performance as well as reduced computational cost over classical model predictive control (MPC). This indicates the newly proposed RHSC is an effective method to address the active control problem for electric powertrains.     

新加坡公共交通发展经验及启示

通过实际考察和走访咨询,系统地总结了新加坡的公共交通发展经验。首先介绍了新加坡对小汽车和公共交通发展采取的＂推、拉策略＂,以及新加坡公共交通的发展历程。在此基础上,对新加坡公共交通发展的成功经验进行了归纳和总结,包括管理机制、公共交通设施建设、公共交通运营系统、政策法规等方面的内容。结合我国城市交通发展的现状和特点,对城市公共交通的发展提出了措施和建议。     

纤维与沥青胶结料的抗拉拔性能评价

通过纤维拉拔试验来评价纤维与沥青胶结料的界面粘结强度,提出了拉拔过程中纤维与沥青胶结料相互作用的受力模型;利用此试验对聚酯纤维和芳纶纤维进行了试验研究,分析了影响界面粘结强度的主要因素,给出了沥青混合料中纤维的合理长度。     

强夯置换法处理滨海公路软土路基

结合辽宁省滨海公路庄河市大张至中隈段的土质情况,阐述了强夯处理软土地基的设计方法、施工过程及处理后的地基效果.