Bicycle mode share in China: a city-level analysis of long term trends

In the past 15 years, cities in China have experienced big changes in socioeconomic and traffic conditions, resulting in a long term change in bicycle use. This study aims to quantify the changes in bicycle mode share in Chinese cities and explore the potential causes. Based on data from 51 cities, it is found that bicycle mode share at the city level decreased gradually in the past. Conventional bicycle mode share decreased with a rate of 3 % per year, but electric bicycle mode share increased with a rate of 2 % per year. The correlations between city features such as demographics and built environments and bicycle mode share at different city sizes are compared. The generalized linear models are estimated to relate the changes in the share of different trip modes to various city-level factors. The results show that the bicycle mode share in a city is impacted by factors including city area size, population density, number of cars, percentage of local road mileage among all roads, and trip purpose. Possible reasons for the changes in bicycle uses in Chinese cities are explored and policy implications are discussed.     

Long-term impact of the Shinkansen on rail and air demand: analysis with data from Northeast Japan

This paper analyses how the high-speed rail construction in Northeast Japan (Tohoku) has affected total demand and interregional travel patterns. We use annual interregional passenger data from 1989 to 2012 and apply regression analysis with the demand between Tokyo and the Tohoku prefectures as the dependent variable. We distinguish particularly between the ‘Full-’ and the ‘Mini-’ Shinkansen, where the latter are branch services running with reduced speed. We find that the ‘Full-Shinkansen’ quickly increases rail and total public transport trips and generates additional rail demand year on year. The ‘Mini-Shinkansen’ impacts are less pronounced. Furthermore, our analysis shows that the Shinkansen has shifted some demand from air to rail once it started operation and increased rail share gradually. We therefore suggest that predictions of demand impacts should carefully distinguish immediate from gradual impacts. We also discuss differences in regional demand in that not all prefectures have gained equally from Shinkansen construction.     

基于标度扩展的AHP在飞机空战效能评估中的应用

阐述了标度扩展AHP法的基本原理和步骤,基于该方法对三种典型战斗机的空战效能进行评估,结果表明,采用标度扩展的AHP法进行效能评估,可以减少计算量,并能提高结果的可信度。     

长歌祭英魂

一个噩耗传来,撼动了每个海事人的内心;一种精神升华,被大家默念、铭记、传颂;一曲挽歌唱响,留不住那缕英魂;一个声音传来,死者长已矣。生者当奋发!     

利用PLC对定位车进行运动控制

黄骅港的翻车机系统分为翻车机、定位车、推车机三大运动机构。它们之间紧密配合,协调动作,共同完成火车的翻卸工作。由于现场实际的需要,对其运动的速度、加速度和定位精度的要求非常高。图1是定位车的运动控制的方框图。     

紫阳汉江2#特大桥栈桥设计与施工技术

详细介绍了紫阳汉江2#特大桥工程栈桥的方案设计、施工技术、使用维护三方面施工经验。     

简析地铁安全门驱动控制器的控制构架

针对地铁安全门驱动控制器,提出了一种电机控制软件构架。该构架以嵌入式操作系统为基础调度各控制任务,将控制任务分为高优先级任务和低优先级任务。在该控制构架基础上,完成了地铁安全门驱动控制器的软件系统,并在样机上进行了应用测试。试验表明,该电机控制软件构架运行稳定,能有序地调度各控制任务,并具有良好的复用性和扩展性。以该构架为基础开发的驱动控制系统控制精度高,动态响应好,能够满足现场应用的需求。     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Numerical Simulation of Advanced Geological Forecasting Based on Multi- Source Seismic Interferometry北大核心CSCD

For existing advanced geological forecasting, the forecast distance is short and the test frequency is high, increasing test and construction risks. Since various methods have different requirements for the test environ-ment, preparation work can be tedious and result in a long construction time thereby affecting normal construction.A new advanced geological forecast technique based on multi-source seismic interferometry for tunnels is proposed.This technique uses the blast at one end of tunnel as a centrum and receives the signal at the other end of the tun-nel, therefore allowing advanced geological forecasting of the unexcavated tunnel part by relative processing and im-aging. A numerical simulation of this kind of geological forecasting using the finite difference method to simulate two kinds of unfavorable geological bodies (karst and a fault) predicted them accurately and verified the effective-ness and accuracy of this geological forecasting method. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.