浅谈高铁建设中区间信号光、电缆的施工安全

总结京津城际、京沪高铁光、电缆施工中的问题,分析信号电缆绝缘性能,浅谈高铁建设中区间信号光、电缆的施工安全,提出改进高铁光、电缆施工方法的建议。     

Dynamic model of cable tension and configuration for vessel at anchor

Journal of Marine Science and Technology - A numerical model considering the seabed friction is developed to investigate the dynamic behavior of anchor cable in this paper. In the model, the anchor...     

带护套的高速永磁同步电动机转子涡流损耗及其径向分布解析模型

本文提出一种针对带有护套的高速永磁同步电机转子涡流损耗及其径向分布的解析模型.模型基于子域法将护套和永磁体子域径向分域,通过计算每个细分区域产生的涡流损耗进而得到转子涡流损耗的径向分布.为提高模型的计算精度,通过扩散方程和磁导模型分别考虑了涡流反作用和定子开槽的影响.利用该解析模型计算了不同气隙长度,不同护套材料及其厚度对转子涡流损耗的影响.最后采用有限元的方法对解析模型进行验证,证明解析模型的正确性.     

Micro-Grinding Performance of Hard-Brittle Chip Materials in Precision Micro-Grinding Microgroove

The micro-structure on hard-brittle chip materials (HBCMs) surface can produce predominant functions and features. The micro-grinding with diamond wheel micro-tip is an efficient method to machine microstructure on HBCMs. However, different HBCMs and crystal orientation may have a significant influence on the micro-grinding performance. In this paper, the micro-grinding performance along different crystal orientation of HBCMs is investigated. First, a dressed 600^# diamond grinding wheel is used to micro-grind micro-structure on HBCMs. Then, the experiment of micro-grinding force test is completed. Finally, the quality of microgroove, the grinding ratio and the micro-grinding force are investigated and they are related to the crystal orientation of HBCMs. It is shown that the stronger resistance to the micro-crack propagation has the best quality of microgroove and the smallest grinding ratio. Moreover, the hardest single-crystal SiC has the best machinability and the micro-grinding force is 38.9%, 10.8% and 46.8% less than the one of sapphire, single-crystal Si and quartz glass, respectively. The direction to micro-grind easily is the crystal orientation 〈10\(\overline 1 \)0〉 for single-crystal SiC and sapphire. In addition, the micro-grinding force increases with the increase of the micro-grinding depth and feed rate and decreases with the increase of the grinding wheel speed.     

Lattice-based group signature with verifier-local revocation

Among several post quantum primitives proposed in the past few decades, lattice-based cryptography is considered as the most promising one, due to its underlying rich combinatorial structure, and the worst-case to average-case reductions. The first lattice-based group signature scheme with verifier-local revocation(VLR) is treated as the first quantum-resistant scheme supported member revocation, and was put forward by Langlois et al. This VLR group signature(VLR-GS) has group public key size of O(nm log N log q), and a signature size of O(tm log N log q log β). Nguyen et al. constructed a simple efficient group signature from lattice, with significant advantages in bit-size of both the group public key and the signature. Based on their work, we present a VLR-GS scheme with group public key size of O(nm log q) and signature size of O(tm log q). Our group signature has notable advantages: support of membership revocation, and short in both the public key size and the signature size.     

提速道岔启动电路分析

为保证提速道岔的可靠运用,在设计方案上对提速道岔启动电路进行了时序控制,减少同时转换提速道岔的转辙机数量,使道岔转辙机转换电流峰值控制在合理的范围内,保证各信号设备正常工作。     

软交换技术在轨道交通公务电话系统中的应用前景

随着软交换技术的不断发展和日渐成熟,建立基于软交换技术的公务电话系统在技术发展和组网灵活性方面具有更大的优势。就软交换技术的概念、特点及其在轨道交通专网中的应用条件进行了分析,论述了软交换是轨道交通公务电话系统的技术发展方向。     

一起智能电源屏站联电源模块故障分析

为吸取故障教训,从多区段故障现象着手,对处理人员的重视程度、特性标准掌握、查找程序,以及电源屏图纸、模块备用、监测报警等方面进行了分析,指出存在问题,提出相应的整改建议。     

铁路列车调度指挥系统网络安全技术研究

研究依据铁道部运输局基础部编写的《TDCS/CTC信息安全防御体系技术方案》,按照铁路列车调度指挥系统信息安全保障体系实际需要,根据自身的实际经验,并借鉴国内外先进网络安全技术与经验,对全路TDCS/CTC网络安全体系进行统一设计与开发的部分实施细节进行研究,并提出了修改建议。     

论检测实验室的设备管理

介绍《实验室资质认定评审准则》和《检测和校准实验室能力认可准则》对检测实验室在用设备的管理要求,分析设备管理的过程要求,论述计量管理是设备管理过程中的着重控制点,总结实际工作中设备管理的难点与对策。