A non-geometrically similar model for predicting the wake field of full-scale ships

The scale effect leads to large discrepancies between the wake fields of model-scale and actual ships, and causes differences in cavitation performance and exciting forces tests in predicting the performance of actual ships. Therefore, when test data from ship models are directly applied to predict the performance of actual ships, test results must be subjected to empirical corrections. This study proposes a method for the reverse design of the hull model. Compared to a geometrically similar hull model, the wake field generated by the modified model is closer to that of an actual ship. A non- geometrically similar model of a Korean Research Institute of Ship and Ocean Engineering (KRISO)’s container ship (KCS) was designed. Numerical simulations were performed using this model, and its results were compared with full-scale calculation results. The deformation method of getting the wake field of full-scale ships by the non-geometrically similar model is applied to the KCS successfully.     

Experimental and numerical investigations on vibration characteristics of a loaded ship model

In this paper, vibration characteristics of the structure in the finite fluid domain are analyzed using a coupled finite element method. The added mass matrix is calculated with finite element method (FEM) by 8-node acoustic fluid elements. Vibration characteristics of the structure in finite fluid domain are calculated combining structure FEM mass matrix. By writing the relevant programs, numerical analysis on vibration characteristics of a submerged cantilever rectangular plate in finite fluid domain and loaded ship model is performed. A modal identification experiment for the loaded ship model in air and in water is conducted and the experiment results verify the reliability of the numerical analysis. The numerical method can be used for further research on vibration characteristics and acoustic radiation problems of the structure in the finite fluid domain.     

Numerical calculation of supercavitating flows over the disk cavitator of a subsonic underwater projectile

To deal with the effect of compressible fluids on the supercavitating flow over the subsonic disk cavitator of a projectile, a finite volume method is formulated based on the ideal compressible potential theory. By using the continuity equation and Tait state equation as well as Riabouchinsky closure model, an “inverse problem” solution is presented for the supercavitating flow. According to the impenetrable condition on the surface of supercavity, a new iterative method for the supercavity shape is designed to deal with the effect of compressibility on the supercavity shape, pressure drag coefficient and density field. By this method, the very low cavitation number can be computed. The calculated results agree well with the experimental data and empirical formula. At the subsonic condition, the fluid compressibility will make supercavity length and radius increase. The supercavity expands, but remains spheroid. The effect on the first 1/3 part of supercavity is not obvious. The drag coefficient of projectile increases as the cavitation number or Mach number increases. With Mach number increasing, the compressibility is more and more significant. The compressibility must be considered as far as the accurate calculation of supercavitating flow is concerned.     

复合地层下泥水盾构管片上浮规律及影响因素分析

针对在盾构隧道施工中经常出现的管片上浮问题,以南昌轨道交通4号线泥水盾构过江隧道为工程依托,通过数理统计方法对泥水盾构穿越不同地层时管片上浮量进行归纳分析,探讨地层参数以及盾构掘进参数对管片上浮的影响规律.研究结果表明:在全断面砂层中掘进,管片上浮量小且上浮值变化稳定;而当进入上软下硬地层和泥质粉砂岩层,管片上浮量急剧...     

Image Registration Technique for Assessing the Accuracy of Intraoperative Osteotomy for Pelvic Tumors by 3D-Printed Patient-Specific Templates

The study aimed to explore the feasibility of an image registration technique for assessing the accuracy of intraoperative osteotomy of pelvic tumors by 3-dimen...     

3D-Printed Porous Titanium Augments for Reconstruction of Massive Bone Defect in Complex Revision Total Knee Arthroplasty:Implant Design and Surgical Technique

Reconstruction of severe bone defects in revision total knee arthroplasty(TKA)remains a challenge for orthopaedists.The progression of medical imaging and addit...     

使用有限元分析以改善重载运输车轴

分析了北美铁路货运发生的车轴故障,介绍了使用有限元对F级和K级车轴进行应力分析计算,研究车轴尺寸变化对应力的影响,并提出了改善重载车轴设计的建议.     

ISS-based robust adaptive fuzzy algorithm for maintaining a ship's track

This paper focuses on the problem of linear track keeping for marine surface vessels. The influence exerted by sea currents on the kinematic equation of ships is considered first. The input-to-state stability(ISS) theory used to verify the system is input-to-state stable. Combining the Nussbaum gain with backstepping techniques,a robust adaptive fuzzy algorithm is presented by employing fuzzy systems as an approximator for unknown nonlinearities in the system. It is proved that the proposed algorithm that guarantees all signals in the closed-loop system are ultimately bounded. Consequently,a ship's linear track-keeping control can be implemented. Simulation results using Dalian Maritime University's ocean-going training ship 'YULONG' are presented to validate the effectiveness of the proposed algorithm.     

Determinants of the property damage costs of bulk barge accidents

This study investigates determinants of the vessel, cargo, and other-property damage costs of bulk barge accidents in US inland waterways. Tobit estimation of a three-equation recursive model suggests that, in bulk barge accidents: (1) vessel damage cost is greater for collision, fire/explosion, and material/equipment failure accidents than for groundings; (2) cargo damage cost is greater at night and when the weather is foggy and increases with barge age; and (3) otherproperty damage cost is greater for multi-vessel accidents, but decreases with barge size. A dollar of vessel damage cost increases other-property damage cost by $1.38, while a dollar of cargo damage cost increases this cost by $6.90. An important result for formulating bulk barge accident cost-reduction policies is that a given determinant might have a negative effect on one type of damage cost but a positive effect on another.     

Institutional reform in ports of developing countries: the case of Lebanon—part I: the plan

Upon the expiry of the concession contract signed between Lebanon and a private company for the Port of Beirut operation (in December 1990), the Government appointed a temporary commission to operate the port under the rules of the expiring concession. The legality of this measure has since always been questioned, while the temporary commission underwent three major personnel changes which clearly prevented any long-term thinking or planning. In 1998, the temporary commission entered into a 20-year joint venture for the establishment of a container terminal. Meanwhile, Lebanon's two main ports were facing major regional competition, while competing against each other to some degree. Thus, the need became urgent to end the temporary status and propose reforms to the entire sector. To that end, the Ministry of Public Works and Transport was commissed by the Government to propose a permanent institutional framework for the port of Beirut while assessing the need for a national maritime sector regulator. This paper presents the recommendations for the institutional reform of the Lebanese maritime transport sector.