Stability Analysis of Uncertain Discrete Time-Delay Control Systems

Based on Lyapunov stability theory, a less conservative sufficient condilions for the stabih＇lies of uncertain discrete delayindependent and delay-dependent control systems are obtained by using the linear matrix inequality （LMI） approach. Judgement of the stability of time-delay systems is transformed to judgement of the feasible solution of an LMI, and hence is solved by use of MATLAB. Numerical simulations verify the validity of the proposed method.     

Integrated optimization of bus priority operations in connected vehicle environment

Most previous works associated with transit signal priority merely focus on the optimization of signal timings, ignoring both bus speed and dwell time at bus stops. This paper presents a novel approach to optimize the holding time at bus stops, signal timings, and bus speed to provide priority to buses at isolated intersections. The objective of the proposed model is to minimize the weighted average vehicle delays of the intersection, which includes both bus delay and impact on nearby intersection traffic, ensuring that buses clear these intersections without being stopped by a red light. A set of formulations are developed to explicitly capture the interaction between bus speed, bus holding time, and transit priority signal timings. Experimental analysis is used to show that the proposed model has minimal negative impacts on general traffic and outperforms the no priority, signal priority only, and signal priority with holding control strategies (no bus speed adjustment) in terms of reducing average bus delays and stops. A sensitivity analysis further demonstrates the potential of the proposed approach to be applied to bus priority control systems in real‐time under different traffic demands, bus stop locations, and maximum speed limits. Copyright © 2016 John Wiley & Sons, Ltd.     

基于CAN的城市客车ABS／ASR／ECB集中控制系统

在分析基于CAN的ABS（Anti-Lock Braking System,防抱死制动系统）、ASR（Anti-Slide Retractor,驱动防滑控制）和ECB（Eddy Current Brake,电涡流缓速器）集中控制系统CAN总线接口的基础上,实现了基于CAN的ABS、ASR和ECB集中控制。     

重庆集装箱中心站工程地质条件及其对策探讨

针对重庆集装箱中心站规模较大、地质条件较复杂、地基沉降要求严格的情况,就场区的工程地质条件及对策进行了分析和探讨.     

材料参数对车身吸能元件抗撞性影响的数值分析

基于数值分析方法研究了材料参数对车身薄壁吸能构件抗撞性的影响.以材料参数为变量,选取多个离散的设计点,用显式有限元分析,求得这些点的比吸能;采用响应面法建立了表示比吸能随材料参数而变化的曲面,和高次多项式拟合时的相对误差曲线.最后给出了有限元分析得到的构件轴对称叠缩变形图,与试验结果吻合很好,表明响应面法与显式有限元技术相结合的方法可行有效.     

基于工作模态法的动力总成刚体参数识别

介绍一种基于多参考点最小二乘频域法(一种工作模态法)的刚体参数识别方法。它适用于具有阻尼和非线性刚度支承的系统(如汽车动力总成),可在实车工作情况下对动力总成的模态参数和惯性参数进行识别。通过实验验证了该方法的有效性。     

咸淡水钢管桩牺牲阳极设计与施工

依托安哥拉LNG码头钢管桩牺牲阳极阴极保护工程,重点介绍在咸淡水环境下牺牲阳极阴极保护的设计、施工与验收,并介绍该工程浅水区引桥钢管桩牺牲阳极的实施。为咸淡水和浅水区的特殊环境下牺牲阳极阴极保护的实施与验收提供了重要依据。     

基于鱼类分布与水力特性的鱼道进口布置方案比选

鱼道进口布置方式直接影响鱼道的诱鱼效果和过鱼效率。以临淮岗枢纽为例,通过构建二维宽浅河道水流流场数值模型,对典型工况下枢纽下游河道流场进行精细模拟,并结合河段鱼类分布的水声学调查结果,对3种不同鱼道进口布置方案进行比选。结果表明：临淮岗闸门下游左右岸流速满足鱼类适宜条件,且靠近鱼类聚集区域,均满足鱼道进口布置条件,可综合考虑经济效益、施工难度、工程安全性等确定布置方案,并建议相应调整闸门运行方案。     

断层与平行隧道空间位置关系对涌水量的影响研究

作为渗流影响边界,断层是制约富水断层区隧道设计及施工的重要影响因素,研究断层对隧道涌水的影响具有重要的理论意义和工程应用价值.为分析断层与隧道空间位置关系对隧道涌水量的影响,将断层视为定水头边界,利用反映法将有界含水层用映射原理转化为无界问题,构建含断层的深埋平行隧道涌水简化计算模型.利用地下水力学理论、达西定律及线性...     

JSF技术在管理信息系统中的应用

文章简要介绍了JSF技术的原理与基本实现方式,以及应用此技术开发的一个管理信息系统,为后续Web应用软件项目的开发提供了技术参考方案。