Use of a probabilistic particle tracking model to simulate the Prestige oil spill

A probabilistic particle tracking model is used to simulate the oil dispersion after the Prestige wreckage. This oil spill constitutes a suitable benchmark to analyze the capabilities of a probabilistic model, since the time elapsed from wreckage to oil landing (12 days) is much longer than the reliability time associated with forecast winds, usually on the order of 3–4 days. The particle model can be run in two different modes: real time mode (when existing reliable wind fields for the event under scope) and in probabilistic mode (in absence of reliable wind fields but with historical fields corresponding to a similar period). The validity of the particle model is first evaluated in a hindcast way, running the Prestige case with the wind fields corresponding to the period November 19 to November 30, 2002, which were not available at the moment of the wreckage. Calculations show the accuracy of the model to provide the right impact point and timing. The probabilistic model is then used to simulate the same event by means of historical data. The region where the oil landed is shown to be the area with the highest probability to be impacted.     

Improved customs inspection at a small international airport: Case study: Colombo

The present procedures for processing arriving passengers at the Colombo International Airport cause inordinte waiting times. An alternate plan, which is based on state of the art customs procedures, and which can reduce waiting times significantly while maintaining a high level of enforcement, is proposed. The present and proposed procedures are analyzed and compared with respect to passenger waiting times, using deterministic queueing theory. An optimal inspection rate of passengers by the customs service is proposed taking into account the fraction of inspected passengers, the waiting time of passengers and the cost of customs processing.     

Development and Evaluation of a High Voltage Supply Unit for Electrorheological Fluid Dampers

Controllable dampers using electrorheological (ER) fluids have attracted considerable interest in recent years. They are proposed for use in semi-active suspensions for ground vehicles. The main advantages of ER fluid dampers are their fast response, ease of control, simple construction and low power requirements. This paper describes the development and testing of a high-voltage supply unit for modulating the damping force of an ER fluid damper. Experimental results on the vibration isolation characteristics of an ER fluid damper with different control strategies, obtained using a quarter-car model test rig, are also presented.     

The influence of food quality on the nutritional acclimation of the copepod Acartia clausi

The influence of food quality on the nutritional metabolism of Acartia clausi was studied experimentally using four different diets: (1) diatom cells of Thalassiosira weissflogii, (2) detritus prepared from the same culture, (3) 50 : 50 mix on a protein basis of the two previous diets, and 4) dinoflagellate cells of Prorocentrum micans. For each trophic, ingestion, gut transit time, trypsin activity and K_m (half saturation constant) were measured at limiting and saturating concentration. Assimilation rates were also estimated for both pure diatoms and mixed live–detrital cell diets. Ingestion followed a Holling type 2 response for diets 1 and 4, a linear one for detritus and an intermediate response for diet 3. Gut transit time displayed different adaptive changes with food regime depending on protein concentration. Trypsin activity was lower for detrital food and trypsin K_m significantly decreased with increasing concentration of live diatoms. Assimilation rates were higher for live food than for mixed live–detrital food. Results illustrated that Acartia-type copepods optimize nitrogen or protein uptake. They suggest that besides chemoreception-mediated selectivity, internal controls by digestion and assimilation also regulate ingestion (feed-back).     

内置式永磁同步电动机无传感器速度控制和转子初始位置估计方法的应用及实验研究

针对内置式永磁同步电动机传动提出了一种新的无速度传感器控制和转子初始位置估计方法.在内置式永磁同步电动机旋转过程中,采用扩展卡尔曼滤波方法,仅需测量电机定子的电压和电流,便可得到转速和转子位置的估计值.对内置式永磁同步电动机,采用扩展卡尔曼滤波方法的主要困难在于在静止坐标系中其动态模型的复杂性.由于磁路的不对称性,在静止坐标系中建内置式永磁同步电动机的模型比建表面式永磁同步电动机模型更复杂.在无传感器的传动系统中,电机的起动过程是一个问题,因为在起动之前没有任何信息可以获得.转子初始位置估计是在电机静止时,在瞬间对定子绕组施加合适的电压脉冲序列,通过测量峰值电流获得转子位置信息.利用磁饱和效应对凸极性的影响来区分南北磁极.给出基于浮点数字信号处理器TMS320C31平台得到的内置式永磁同步电动机实验结果.     

Stability and competition in intermodal container shipping: finding a balance

This article considers the perennial topic of how to acheive an equilibrium balance between stability and competition in intermodal shipping. It argues that competition is becoming destructive, but that the imbalance is difficult to correct in a climate where competitive pressures are strog everywhere and restraints on competiiton are unfashionable. In this context, pricing of intermodal services, the emergence of multi-trade alliances, the revelance of contestable market theory and developments in regulatory policies are all examimned. Some points towards restoring an equilibrium balance are offered.     

Thermal design of automobile exhaust based thermoelectric generators: Objectives and challenges

The potential for thermoelectric power generation (via waste heat recovery onboard automobiles) to displace alternators and/or provide additional charging to a vehicle battery pack has increased with recent advances in thermoelectric material processing. In gasoline fueled vehicles (GFVs), about 40% of fuel energy is wasted in exhaust heat, while a smaller amount of energy (30%) is ejected through the engine coolant. Therefore, exhaust-based thermoelectric generators (ETEG) have been a focus for GFV applications since the late 1980s. The conversion efficiency of modern thermoelectric materials has increased more than three-fold in the last two decades; however, disputes as to the thermal design of ETEG systems has kept their overall efficiency at limited and insufficient values. There are many challenges in the thermal design of ETEG systems, such as increasing the efficiency of the heat exchangers (hot box and cold plate), maintaining a sufficient temperature difference across the thermoelectric modules during different operating conditions, and reducing thermal losses through the system as a whole. This paper focuses on a review of the main aspects of thermal design of ETEG systems through various investigations performed over the past twenty years. This paper is organized as follows: first, the construction of a typical ETEG is described. The heat balance and efficiency of ETEG are then discussed. Then, the third section of this paper emphasizes the main objectives and challenges for designing efficient ETEG systems. Finally, a review of ETEG research activities over the last twenty years is presented to focus on methods used by the research community to address such challenges.     

Optimized design for a MacPherson strut suspension with side load springs

Undesired lateral force inevitably exists in a MacPherson suspension system, which is liable to damper rod’s side wear and promotes the damper’s inner friction decreasing the ride performance from the suspension system. Substituting a new side load spring with curved centerline for the conventional coil spring has been proven able to solve these problems and Multi-body Dynamics combining with Finite Elements Analysis may be an efficient method in optimizing its design. Therefore, taking a passenger car as example, a detailed multi-body dynamics model for the suspension system is built to simulate forces exerted on the damper and the minimization of its lateral component is selected as the design target for the spring. When the structure optimization of the side load spring is performed using FEA software ANSYS, its vertical and lateral elastic characteristics, supported by test data, are analyzed. After importing FEA results back to the suspension system, the dynamics simulation can be performed to validate the optimization result.