Experimental studies on low pressure semi-direct fuel injection in a two stroke spark ignition engine

In this work a two-stroke scooter engine was modified to work with semi-direct injection of gasoline at a pressure of 8 bar from an injector in the cylinder barrel pointed toward the cylinder head. The influence of injection timing, injection pressure, spark plug location and air-fuel ratio, on performance, emissions and combustion characteristics has been investigated. In addition, a comparison has been made with manifold injection of gasoline on the same engine at a given speed and various outputs. A significant reduction in HC emissions and fuel consumption with no adverse effects on NOx emissions and combustion stability was observed. A small drop in power and increase in CO emission were observed disadvantages of the new injection system. Injection timing was found to be the most important factor and a balance between reduction in shortcircuited fuel by late injection, and time for mixture preparation by advancing the injection, was found to be essential.     

Reliability-based sensitivity analysis of vehicle components with non-normal distribution parameters

Techniques from the perturbation method, fourth moment method, reliability-based design theory, and sensitivity analysis approach are employed to present a practical and efficient method for testing the reliability sensitivity of vehicle components with non-normal distribution parameters. With the condition that the first four moments of original random variables are known, the reliability sensitivity theory and cases are researched using the presented numerical method. The variation regularities of reliability sensitivity are obtained and the effects of design parameters on reliability of the vehicle components are studied. The sophisticated formulation provided in this paper is easily amenable to computational procedures. The respective program can be used to obtain the reliability sensitivity of vehicle components with non-normal distribution parameters accurately and quickly. The results obtained are perfect and the solutions compared very well with those from Monte Carlo simulation. The method presents a theoretic basis for the reliability design of the vehicle components.     

Analysis of a regenerative braking system for Hybrid Electric Vehicles using an Electro-Mechanical Brake

The regenerative braking system of the Hybrid Electric Vehicle (HEV) is a key technology that can improve fuel efficiency by 20∼50%, depending on motor size. In the regenerative braking system, the electronically controlled brake subsystem that directs the braking forces into four wheels independently is indispensable. This technology is currently found in the Electronic Stability Program (ESP) and in Vehicle Dynamic Control (VDC). As braking technologies progress toward brake-by-wire systems, the development of Electro-Mechanical Brake (EMB) systems will be very important in the improvement of both fuel consumption and vehicle safety. This paper investigates the modeling and simulation of EMB systems for HEVs. The HEV powertrain was modeled to include the internal combustion engine, electric motor, battery and transmission. The performance simulation for the regenerative braking system of the HEV was performed using MATLAB/Simulink. The control performance of the EMB system was evaluated via the simulation of the regenerative braking of the HEV during various driving conditions.     

Model-based control system design in a urea-SCR aftertreatment system based on NH3 sensor feedback

This paper presents preliminary control system simulation results in a urea-selective catalytic reduction (SCR) aftertreatment system based on NH₃ sensor feedback. A four-state control-oriented lumped parameter model is used to analyze the controllability and observability properties of the urea-SCR plant. A model-based estimator is designed via simulation and a control system is developed with design based on a sliding mode control framework. The control system based on NH₃ sensor feedback is analyzed via simulation by comparing it to a control system developed based on NO_x sensor feedback. Simulation results show that the NH₃ sensor-based strategy performs very similarly in comparison to a NO_x sensor-based strategy. The control system performance metrics for NO_x index, urea index, urea usage, and NH₃ slip suggest that the NO_x sensor can be a potential alternative to a NO_x sensor for urea-SCR control applications.     

Belt routing and safety assessment through computer simulation

Most of the research on safety belt systems has involved crash simulation that only considered a dynamic human model. However, belt routing analysis, usually known as comfort level estimation, is also an important factor in safety belt design, considering that serious injuries of the abdominal region result from the infiltration of a belt into the neck or the chest. Thus, safety belt evaluations using kinematic human models are also needed. In this paper, a belt fit simulation method is suggested. Using the proposed process, both comfort and safety analyses can be performed under the same conditions continuously, and thus the safety belt design parameters, such as the location of anchor points, dummy posture and etc., can be evaluated. In conclusion, this computer process enables a belt system design to reduce injuries.     

Theoretical method for predicting the weight reduction rate of a box-type car body for rolling stock by material substitution design

In this paper, a theoretical approach is suggested for predicting the structural performances and weight reduction rate of a car body with a box-type section when its material is substituted with a lightweight material for weight saving. For the material substitution design of a car body for rolling stock, bending, axial, and twisting deformations should be considered at constant stiffness and strength conditions. To compare the weight reduction effects on different material applications, some new indices were derived from a structural performance point of view. The derived indices provide good measures to estimate weight reduction by material substitution design and can be effectively applied to the conceptual design of a car body.     

Performance of air conditioners with a gas-liquid separation condenser and one-tank laminated evaporator

In this study, a parallel flow condenser and laminated evaporator for an automotive air-conditioning system were modified to improve performance. Gas-liquid separation type condensers, in which the condenser and receiver drier are integrated, and one-tank laminated type evaporators were developed, and their performances were investigated experimentally using HFC-134a. Heat transfer characteristics in the condenser are examined by means of air temperature, air velocity entering the condenser and inlet pressure of the refrigerant; heat transfer characteristics in the evaporator are examined by means of air temperature, relative humidity, flow rate of air, outlet pressure of refrigerant and superheat. Pressure drops for both evaporator and condenser are also measured, and correlations for pressure drop are derived for the condenser and evaporator, respectively. Air velocity and mass flow rate of the refrigerant have a significant effect on the overall heat transfer coefficient, and flow pass is not significantly influenced by the cooling capacity of the condenser. The overall heat transfer coefficient of the evaporator increases as air flow rate, air temperature and relative humidity increases.     

Grain refinement in bearing steels using a double-quenching heat-treatment process

A double-quenching (D/Q) process is proposed for heat-treating high carbon-chromium bearing steels to improve the fatigue properties through refinement of the microstructure. The new heat treatment method has two steps: The first step is a nitrocarburizing process that results in high surface hardness and lowers the transformation temperature. The second step is the same as in the conventional quenching process but can be conducted at a considerably lower temperature than in conventional quenching. The microstructure in the material that is caused by the D/Q heat treatment is much finer than in the conventional Q/T (quenching and tempering) process. In order to quantify the performance of the proposed heat-treatment process, various mechanical property tests are carried out. The rolling contact fatigue life of double-quenched bearing steels was eight times higher than in bearing steels that were treated by conventional Q/T.     

美国桥梁技术近期发展概况

美国是公认的世界上交通运输网最广泛的国家.随着74 674 km国道系统的建成,并伴随着人们对于旅游和货物运输要求的持续增长,交通便利性已经成为了一种权利.全国统计在册的600 000座桥梁的平均桥龄为45年,这就为推进及推广应用桥梁技术的研究提供了巨大的机会,通过这些技术,可使公路基础设施更新中的桥梁更耐久、更经济,可采用更快速的施工技术及修建更可靠、更便于维护的结构.介绍美国桥梁技术近期发展概况.     

Institutional reform in ports of developing countries: the case of Lebanon—part I: the plan

Upon the expiry of the concession contract signed between Lebanon and a private company for the Port of Beirut operation (in December 1990), the Government appointed a temporary commission to operate the port under the rules of the expiring concession. The legality of this measure has since always been questioned, while the temporary commission underwent three major personnel changes which clearly prevented any long-term thinking or planning. In 1998, the temporary commission entered into a 20-year joint venture for the establishment of a container terminal. Meanwhile, Lebanon's two main ports were facing major regional competition, while competing against each other to some degree. Thus, the need became urgent to end the temporary status and propose reforms to the entire sector. To that end, the Ministry of Public Works and Transport was commissed by the Government to propose a permanent institutional framework for the port of Beirut while assessing the need for a national maritime sector regulator. This paper presents the recommendations for the institutional reform of the Lebanese maritime transport sector.