Coupled analysis of multi-body motions in offshore connecting process

The coupled dynamic responses of two pontoons while connecting with each other in irregular waves are calculated by means of 3D potential flow theory. The computation is used to find the optimal status for connecting at certain sea state. On the basis of the relative motion of two pontoons in irregular waves,visual FORTRAN programming language,as well as open graphics library (OpenGL),is used to develop a set of virtual reality system,which is fully interactive and with realistic effect. The transfinite int...     

Low cost and reliable anonymity protocols in P2P reputation systems

In peer-to-peer (P2P) reputation systems,each peer's trustworthiness is evaluated based on its pseudonym's rating values given by other peers. Since it is assumed that each peer has a long lived pseudonym,all the transactions conducted by the same peer may be linked by its pseudonym. Therefore,one of the fundamental challenges in P2P reputation systems is to protect peers' identity privacy. In this paper,we present two independent anonymity protocols to achieve all the peers' anonymity by changing pseudonym...     

Numerical study of the forming process of high frequency welded pipe

The roll forming process is applied to the manufacturing of high frequency welded (HFW) pipes,section steels,etc. In this paper,the roll forming process of the HFW pipe is simulated with the finite element method (FEM). A user-defined material routine of the commercial finite element code ABAQUS/Explicit is developed,and the mixed hardening constitution model is realized through the user-defined material routine. Based on the mixed hardening constitutive equation,the numerical simulation of roll forming pro...     

Measurement of hydrocarbon and carbon monoxide emissions during the starting of automotive DI Diesel engines

Most of hydrocarbon (HC) and carbon monoxide (CO) emissions from automotive DI Diesel engines are produced during the engine warm-up period and are primarily caused by difficulties in obtaining stable and efficient combustion under these conditions. Furthermore, the contribution of engine starting to these emissions is not negligible; since this operating condition is highly unfavorable for the combustion progress. Additionally, the catalytic converter is ineffective due to the low engine temperature. In conjunction with adequate engine settings (fuel injection and fresh air control), either the glow plugs or the intake air heater are activated during a portion of the engine warm-up period, so that a nominal engine temperatures is reached faster, and the impact of these difficulties is minimized. Measurement of gaseous pollutants during engine warm-up is currently possible with detectors used in standard exhaust gas analyzers (EGA), which have response times well-suited for sampling at such transient conditions. However, these devices are not suitable for the measurement of exhaust emissions produced during extremely short time intervals, such as engine starting. Herein, we present a methodology for the measurement of the cumulative pollutant emissions during the starting phase of passenger car DI Diesel engines, with the goal of overcoming this limitation by taking advantage of standard detectors. In the proposed method, a warm canister is filled with an exhaust gas sample at constant volumetric flow, during a time period that depends on the engine starting time; the gas concentration in the canister is later evaluated with a standard EGA. When compared with direct pollutant measurements performed with a state-of-art EGA, the proposed procedure was found to be more sensitive to combustion changes and provided more reliable data.     

Fatigue design approach for the spot-welded T-type member using a simulated single spot-welded joint

In order to develop a fatigue design method for actual railroad car and commercial vehicle body structures using the fatigue data of simulated single spot-welded lap joints, we first analyzed the stress distribution and evaluated fatigue strength of spot-welded T-type members that are the components of actual railroad car and commercial vehicle body structures. Next, fatigue design approach of these members using the fatigue data of single spot-welded lap joints was investigated. From our results, we found that, even though there was a quantitative difference of fatigue strength between the single spot-welded joint and the actual members over the same number of fatigue cycles, through the use of appropriate correction, the fatigue design criterion of actual spot-welded members, such as those used in railroad car and commercial vehicle body, can be predicted using the fatigue strength of single spot-welded joint.     

Influence of shock absorber wearing on vehicle brake performance

In order to safely maintain a vehicle, it is necessary to verify the most important systems that affect safety during Periodic Motor Vehicle Inspections (PMVIs). In a previous paper, a test method and validation criteria were suggested by the authors to verify shock absorber status during PMVIs, as they are a fundamental component that may wear out during a vehicle’s life. In this paper, variations of the performance of the vehicle’s brakes resulting from shock absorber wearing have been analyzed, in order to confirm whether the suggested criteria is valid for taking into account longitudinal forces and pitch movement on the vehicle. A simulation-based study was conducted with several configurations of a worn damper on a vehicle driving on two virtual roads: smooth and undulating. The results confirmed that the damping coefficient established as an acceptable value to verify the shock absorber status in PMVIs is also valid considering the forces involved in a braking maneuver.     

Effect of intake valve swirl on fuel-gas mixing and subsequent combustion in a CAI engine

A fully three-dimensional model was used to investigate the optimal value for intake valve lift in a CAI engine. Uniform mixing in the engine is a key parameter that affects the auto-ignition reliability and thermal efficiency. The method of intake of the air supply often determines the uniformity (or quality) of the fuel-air mixture. In this paper, four strategies were applied for controlling the swirl intensity of intake air. The variation of the intake valve lift induces different swirling and tumbling intensities. Both experimental data and 1D WAVE software (Ricardo, Co.) were coupled with the 3D model to provide pressure and temperature boundary conditions. The initial condition of the EGR mass fraction was also provided by the 1D model. The benchmark scenario (Case 1) was considered as a valve lift with 2 mm for all intake valves. We found that an intake valve lift of 6 mm with the other intake valve closed (i.e., Case 5) yielded the largest swirling (helical motion in the axial direction) and tumbling, which in turn rendered optimal fuel-gas mixing. We also found that fuel distribution affected the auto-ignition sites (or spot). The better the mixing, the greater the gas temperature and combustion efficiency achieved, as seen in Case 5. The NOx level, however, was increased due to the gas temperature. The optimal operating condition is selected from the viewpoints of environmental protection and combustion efficiency.     

碎石基层的塑性变形对混凝土路面力学行为的影响

在这项研究中,通过与旋转硬化概念的结合来修正基于广义SMP准则的原始改良Cam-Clay模型,模拟在水泥混凝土板下碎石基层的塑性变形的发展,称之为旋转硬化Cam-Clay模型.模型通过预测塑性变形累计曲线和对碎石基层循环加载的三轴压缩试验得到的试验值相比较来确认.模型成功地预测了试件塑性变形的发展,塑性变形在一开始时迅速增长,此后增长的速率减小.该模型与三维有限元模型 (3DFEM)结合,在足尺试验路面上进行模拟试验.试验发现,水泥混凝土路面的弯沉值随着荷载重复次数的增加而增加,表明在水泥混凝土板下由于基层的塑性变形而产生了缝隙.通过引入等效荷载次数的概念来模拟在合理的计算时间内施加大量循环荷载的塑性回应.模拟结果和试验数据比较表明该概念是有效的.此外,调查了由于基层缝隙而引起的水泥混凝土路面的力学响应(变形,压力以及弯沉).     

Multilingual financial news retrieval and smart recommendation based on big data

In view of the study of finance and economics information, we research on the real-time financial news posted on the authority sites in the world’s major advanced economies. Analyzing the massive financial news of different information sources and language origins, we come up with a basic theory model and its algorithm on financial news, which is capable of intelligent collection, quick access, deduplication, correction and integration with financial news’ backgrounds. Furthermore, we can find out connections between financial news and readers’ interest. So we can achieve a real-time and on-demand financial news feed, as well as provide a theoretical basis and verification of the scientific problems on real-time processing of massive information. Finally, the simulation experiment shows that the multilingual financial news matching technology can give more help to distinguish the similar financial news in different languages than the traditional method.     

Price fluctuation,risk hedge and choice of optimal point

On the question of optimal hedge ratio, this paper firstly draws the chance to choose a market-entering point to the model. Using the replication principle of finance engineering, we make an assumed equity and get the optimal hedge ratio of the model, which gives the theoretical support to the practice. We should not only concern on the market-entering point, but also concern on the period of the hedge that still influences the effect of hedging. But only the period of hedging gives its affection if the time is relatively long.