Analysis of wheel speed vibrations for road friction classification

ABSTRACT

With higher level of vehicle automation, it becomes increasingly important to know the maximum possible tyre forces during normal driving. An interesting method in this respect is estimating the tyre–road friction from the resonance peak in the wheel speed signal, excited by road roughness. A simulation environment using the MF-Swift tyre model is proposed, which gives insight in the correctness and functioning of this method. From implementing the estimation algorithm and considering the tyre torsional vibration system, it is concluded that frequencies and damping ratios can be estimated with reasonable accuracy and that the trends observed with changing road friction are consistent. Furthermore, the proposed simulation environment gives opportunity to investigate other issues like robustness of the estimation method to road roughness. Additionally, the tyre modelling aspect of the estimation method is analysed and improvements are proposed.     

Optimal tyre usage for a Formula One car

Variations in track temperature, surface conditions and layout have led tyre manufacturers to produce a range of rubber compounds for race events. Each compound has unique friction and durability characteristics. Efficient tyre management over a full race distance is a crucial component of a competitive race strategy. A minimum lap time optimal control calculation and a thermodynamic tyre wear model are used to establish optimal tyre warming and tyre usage strategies. Lap time sensitivities demonstrate that relatively small changes in control strategy can lead to significant reductions in the associated wear metrics. The illustrated methodology shows how vehicle setup parameters can be optimised for minimum tyre usage.     

Knock in dual-fuel diesel combustion with an E85 ethanol/gasoline blend by multi-dimensional simulation

In this paper, knocking combustion in dual-fuel diesel engine is modeled and investigated using the CFD code coupled with detailed chemical kinetics. The ethanol/gasoline blend E85 is used as the primary fuel in a dual-fuel combustion concept based on a light-duty diesel engine equipped with a common-rail injection system. The E85 blend is injected and well mixed with intake air in the intake manifold and is ignited by the direct injection diesel fuel. A 46-species, 187-reaction Multicomponent mechanism is adopted to model the auto-ignition process of the E85/air/diesel mixture ahead of the flame front. Based on the model validation, knocking combustion under boost and full load operating condition for 0 %, 20 %, 50 %, as well as 70 % E85 substitute energy is simulated. The effects of E85 substitute rate and two stage injection strategies on knock intensity, power output, as well as location of the auto-ignition initiation is clearly reproduced by the model. The calculation result shows that, for a high E85 rate of 50 % and 70 % with single injection strategies, the most serious knock and the origin of auto-ignition always occurs far away from where the flame of diesel spray is first generated, at the center of combustion chamber, due to higher pressure wave, relatively richer E85 mixture and longer distances of flame propagation. The two stage injection strategies with a small amount of diesel pilot injection ahead of the main injection primarily influence the ignition behavior of the directly injected fuel, leads to a lower pressure rise rate and a reduced propagation distance, both of which contribute to the attenuation of knock intensity for a higher E85 rate.     

Non-natural equilibrium contour design for radial tire and its influence on tire performance

Two types of radial tire 11.00R20 and 385/65R22.5 are chosen as the research objects, and their carcass contours are redesigned by using Sakai Hideo’s, Frank’s and the new non-natural equilibrium contour design theories, which were based on analyzing the current non-equilibrium contour design theories of radial tire. Then the tire wear, rolling resistance and grip performance of the two radial tires designed by different non-natural equilibrium contour design theories are comprehensively analyzed with the finite element software ABAQUS. The results show that Frank’s contour design theory can reduce tire wear; the new non-natural equilibrium contour design theory can enhance tire wear, rolling resistance performance, etc. It is also found that the tire carcass contour has great influence on tire performance, especially on the tire rolling resistance. The new non-natural equilibrium contour theory provides a guidance to reduce the tire rolling resistance, and it can break through the target conflicts in tire performance. The tire with the new non-natural equilibrium carcass contour can enhance its comprehensive performance.     

Performance evaluation of slim low-risk-deployment dual-type passenger airbag system with dispersed inflation pressure

Motor vehicle passenger airbags have been proven to be effective for reducing the possibility of passenger injury during a crash. However, the inflation of the airbag sometimes causes serious injury when a passenger is positioned close to the airbag. The United States Federal Motor Vehicle Safety Standard (FMVSS) 208 requires the use of a low-riskdeployment (LRD) passenger airbag system. This paper proposes a newly developed airbag system comprising two slim airbags mounted on the instrument panel. A series of tests were conducted using the FMVSS 208 test procedures to demonstrate the effectiveness of the proposed system. It was found that the system not only satisfied the injury criteria of FMVSS 208, but was also effective for protecting passengers of all sizes.     

Novel coordinated algorithm for Traction Control System on split friction and slope road

A Traction Control System (TCS) is used to avoid excessive wheel-slip via adjusting active brake pressure and engine torque when vehicle starts fiercely. The split friction and slope of the road are complicated conditions for TCS. Once operated under these conditions, the traction control performance of the vehicle might be deteriorated and the vehicle might lack drive capability or lose lateral stability, if the regulated active brake pressure and engine torque can’t match up promptly and effectively. In order to solve this problem, a novel coordinated algorithm for TCS is brought forward. Firstly, two brake controllers, including a basic controller based on the friction difference between the two drive wheels for compensating this difference and a fuzzy logic controller for assisting the engine torque controller to adjust wheel-slip, are presented for brake control together. And then two engine torque controllers, containing a basic PID controller for wheel-slip control and a fuzzy logic controller for compensating torque needed by the road slope, are built for engine torque control together. Due to the simultaneous and accurate coordination of the two regulated variables the controlled vehicle can start smoothly. The vehicle test and simulation results on various road conditions have testified that the proposed method is effective and robust.     

Effect of regenerative braking energy on battery current balance in a parallel hybrid gasoline-electric vehicle under FTP-75 driving mode

In recent years, a hybrid electric vehicle (HEV) has been considered a successful technology. Especially, in case of a full HEV, the motor can drive the vehicle by itself at low velocity or assist the engine at high load. To improve the hybrid electric vehicle’s efficiency, a regenerative braking system is also applied to recover from kinetic energy. In this study, an experimental control apparatus was set up with a parallel hybrid electric vehicle mounted on a chassis dynamometer to measure ECU (engine control unit) and MCU (motor control unit) signals, including the current and state of charge in the battery. In order to analyze regenerative braking characteristics, user define braking driving cycle was introduced and carried out using different initial velocities and braking times. The FTP 75 driving cycle was then adapted under different initial SOC (state of charge) levels. The experiment data was analyzed in accordance with the vehicle velocity, battery current, instant SOC level, motor RPM, engine RPM, and then vehicle driving mode was decided. In case of braking driving cycle, it was observed that SOC were increased up to 1.5 % when the braking time and the velocidy were 6 second and 60 km/h, respectively. In addition, using the FTP 75 driving cycle, mode 1 was most frequently operated at SOC 65 conditions in phase 1. In phase 2, due to frequent stop-go hills, percentage of mode 1 was increase by 22 %. Eventually, despite of identity, it was shown that the characteristics of phase 3 differed from phase 1 due to the evanishment of the effects of initial SOCs.     

Novel hybrid optimal algorithm development for DC motor of Automated Manual Transmission

A novel hybrid optimal algorithm for DC motor of electro-mechanical Automated Manual Transmission (AMT) is presented. It combines non-linear time optimal controller and optimal Linear Quadratic Regulator (LQR) consequently used at different shifting stages. The working principle and dynamic characteristics of the AMT system are firstly presented, and the model of the DC motor is analyzed in detail. The non-linear time optimal controller is designed to explore the potential of the motor and minimize the gear shifting time. While the optimal LQR is then adopted at the final shifting stage to avoid overshoot and increase system robustness. Based on the position control algorithm of the actuators, the coordinated shifting control strategy is also proposed. Both simulation and vehicle test results demonstrate that, this control algorithm could decrease the shifting time and improve the shift quality effectively.     

Bayesian game-theoretic approach based on 802.11p MAC protocol to alleviate beacon collision under urban VANETs

Vehicular Ad-hoc Networks (VANETs) facilitate the broadcasting of status information among vehicles. In the IEEE 802.11p/WAVE vehicle network environment, the strict periodic beacon broadcasting of safety messages requires status advertisement to assist drivers in maintaining safety. The beacon broadcasting is required for real-time communication, and for avoiding the degradation of communication channels in high vehicular density situations. However, a periodic safety beacon in the IEEE 802.11p/WAVE standard can only transmit packets on a single channel using the MAC protocol. In high vehicular density situations, the channel becomes overloaded, thereby increasing the probability of beacon collision, and hence reducing the influx of successfully received beacons, which increases the delay. Many studies have indicated that appropriate congestion control algorithms are essential to provide efficient operation of a network. In this paper, to avoid beacon congestion, we have considered game theoretic models of wireless medium access control (MAC) where each transmitter makes individual decisions regarding their power level or transmission probability. We have evaluated the equilibrium transmission strategies of both the selfish and the cooperative user. In such a game-theoretic study, the central question is whether Bayesian Nash equilibrium (BNE) exists, and if so, whether the network operates efficiently at the equilibrium point. We proved that there exists only one BNE point in our game and validated our result using simulation. The performance of the proposed scheme is illustrated with the help of simulation results.     

Effect of injection timing,injector opening pressure,injector nozzle geometry,and swirl on the performance of a direct injection,compression-ignition engine fuelled with honge oil methyl ester (HOME)

Increasing petroleum prices, increasing threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for engines. Evolving feasible technology and recurring energy crisis necessitated a continued investigation into the search for sustainable and clean-burning renewable fuels. In this investigation, Honge oil methyl ester (HOME) was used in a four stroke, single cylinder diesel engine. Tests were carried out to study the effect of fuel injection timing, fuel injector opening pressure (IOP) and injector nozzle geometry on the performance and combustion of CI engine fuelled with HOME. Injection timing was varied from 19°bTDC (before top dead centre) to 27°bTDC in incremental steps of 4°bTDC; injector opening pressure was varied from 210 bar to 240 bar in steps of 10 bar. Nozzle injectors of 3, 4 and 5 holes, each of 0.2, 0.25 and 0.3 mm size were selected for the study. It was concluded that retarded injection timing of 19°bTDC, increased injector opening pressure of 230 bar and 4 hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions. Further air-fuel mixing was improved using swirl induced techniques which enhanced the engine performance as well.