采用快速镀铁法修复连杆

<正>采用镀铁法修复磨损不大的零件比堆焊法有一系列优点:对零件没有热力作用;零件不会翘曲;所镀复的金属利用率高;可以用不贵重和不稀缺的材料获得耐磨镀层。 普通镀铁法的缺点是工序多、耗水量大、排水污染、镀层的电镀速度低。 本文介绍的连杆大头快速镀铁工艺将会克服上述缺点。电镀前对连杆先进行清理与缺陷检查,并放在除油装置(图1)上,用滑石粉对连杆大头内表面除油。将连杆4套在轴2和带毛刷的轴5上,毛刷预先涂上滑石粉。轴5的转速为50～100r/min,在转动1分钟后,利用泵7将箱体1底壳内的水压送到清洗机构3,以此除去连杆表面上的滑石粉和其他污物。除油和清洗的时间总计为2～3分钟。     

两种直接波浪能转换系统性能的比较:阿基米德波浪摆和波能浮筒(英文)

Many wave energy conversion devices have not been well received. The main reasons are that they are too complicated and not economical. However, in the last two decades direct conversion systems have drawn the attention of researchers to their widely distributed energy source due to their simple structure and low cost. The most well-known direct conversion systems presently in use include the Archimedes Wave Swing (AWS) and Power Buoy (PB). In this paper, these two systems were simulated in the same conditions and their behaviors were studied in different wave conditions. In order to verify the simulations, results of the generator of the finite element computations were followed. An attempt was made to determine the merits and drawbacks of each method under different wave conditions by comparing the performance of the two systems. The wave conditions suitable for each system were specified.     

双通线加热的热力学及实验分析(英文)

The present investigation deals with process analysis of oxy-acetylene flame assisted double pass line heating for varying plate thickness. oxy-acetylene flame as the heat source for multi pass line heating to achieve 3-D bending of plates with varying thicknesses was studied. The oxy-acetylene flame was modeled as the moving heat source in the FEM analysis. The transient thermal histories were predicted taking into account the temperature dependent thermo-mechanical properties. A comparative study between single pass and double pass line heating residual deformation was also carried out. The temperature distribution and residual deformations predicted by the numerical model developed in the present work compared fairly well with those of the experimental ones.     

Experimental Investigation of TARMAX Model for Modeling of Hydrodynamic Forces on Cylinder-like Structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous (ARMAX) input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this paper, the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input a...     

采取使用措施降低废气排放中的颗粒数

日益收紧的轿车废气排放限值对发动机的开发不断提出新的挑战。欧5排放标准首次对汽油机实施颗粒质量排放限值,紧接着从欧6排放标准起,在颗粒质量排放限值的基础上,又首次实施颗粒数排放限值。AVL公司已研究了降低机内原始颗粒排放的可能性,开发了未来的减排方案,并证实采取使用措施能够降低颗粒排放。     

交通拥堵反思

通过对交通拥堵进行反思,认为交通拥堵是充满活力的成功城市的伴生品,应从不同角度考虑拥堵问题.提出了十项有别于传统观点的提议,主要包括:机动性至关重要,交通拥堵是社会、经济活力的象征;道路扩容效果短暂,并会诱发潜在需求,但仍可带来一定的社会、经济效益;土地使用对出行行为的改变需要长期的努力;紧凑型发展会加剧交通拥堵;降低...     

中国城市道路规划方位性问题研究

文章结合中国的传统建筑文化理念和现代科学原理,从历史文化、能源节约、环境保护、房地产定价、交通安全等多方面分析研究了城市道路在规划和设计时所应遵从的定向规则。     

海格新一代插电式混合动力客车值得信赖

海格新能源客车在研发之初,便确定了节能率与安全性可靠性并举的技术路线。海格新能源客车5000辆的市场验证,市场客户普遍评价,海格新能源客车不仅注重节能率,安全性可靠性也更是值得信赖。