基于固结度等效的软土地基沉降预测方法探讨

通过对常用软土地基沉降计算方法的分析,并基于固结度等效的原则推导出了计算地基最终沉降的计算公式,给出了某一时刻地基剩余沉降与沉降速率的关系。该法概念明确、参数确定容易,避免了传统沉降预测方法中确定参数时受人为因素影响大的缺点,该方法有一定的参考价值。     

从大莱龙铁路投标谈如何提高报价内涵质量

通过复核工程数量、合理计算运杂费和灵活编制补充单价,以及在认真检查计算过程中存在的问题等方面,简述提高报价内涵质量.     

Development of Green-Naghdi models with a wave-absorbing beach for nonlinear, irregular wave propagation

Two-dimensional and three-dimensional Green-Naghdi (GN) models equipped with a numerical wave-absorbing beach have been developed to simulate nonlinear, regular, and irregular wave propagation. The numerical beach is introduced near the downstream boundary to absorb outgoing waves. An appropriate amount of numerical damping and an appropriate length of numerical beach are investigated using numerical experiments. The results show that the GN models with a numerical beach work very well in simulating wave propagation in water in a small computational domain.     

APPLICATION OF HMB－45 MONOCLONAL ANTIBODY AND S100 PROTEIN IN THE IMMUNOHISTOCHEMICAL DIAGNOSIS OF MELANOMA

ＡＰＰＬＩＣＡＴＩＯＮＯＦＨＭＢ－４５ＭＯＮＯＣＬＯＮＡＬＡＮＴＩＢＯＤＹＡＮＤＳ１００ＰＲＯＴＥＩＮＩＮＴＨＥＩＭＭＵＮＯＨＩＳＴＯＣＨＥＭＩＣＡＬＤＩＡＧＮＯＳＩＳＯＦＭＥＬＡＮＯＭＡＬｉｕＤａｎｙａ（刘丹亚）；ＳｕＢａｏｓｈａｎ（苏宝山）；Ｘｕ...     

合成脂肪酸废水的厌氧处理

对合成脂肪酸废水首先采用氧化钙处理，使其浓度降低到３０００ｍｇ／Ｌ以下，再采用中温厌氧生物处理。在平均水力停留时间为５天时，废水的ＣＯＤＣｒ去除率达７９．１％，沼气产率为０．４１ＮＭ３／ｋｇＣｏＤＣｒ试验还发现，的存在失使厌氧发酵的ｐＨ值上升。     

三菱FV系列车离合器系统修复后的排气作业

在维修FV系列车过程中，离合器控制油路拆卸、修理、安装后，要对离合器系统进行注油和排气作业，即从离合器助力器排气螺栓排出空气。该车的排气作业不仅仅需要很多工时，而且严重影响修理效率。在详细分析该车型离合器系统的结构和工作原理的基础上，提出了一种高效的排气作业方法。     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.     

模糊控制变增益在曲柄箱油雾浓度检测系统中的应用

由于曲柄箱油雾浓度变化范围很大，在计算机控制系统中，必须根据油雾浓度变化而改变增益，以保证A／D转换精度，本文介绍了采用模糊算法控制增益的方法。     

基于Multigen Creator和Vega的"数字校园"演示系统开发

为了展示武汉大学美丽的校园风貌 ,充分利用我校新近引进的虚拟现实系统 ,开发了一个“数字校园”演示系统 ,实现了虚拟现实表现的基本功能。介绍了该演示系统的有关技术细节 ,包括系统构成、数据处理流程和应用软件的二次开发技术等     

TDZⅢ型弹性轨枕的设计与计算

我国既有线道碴厚度不足是普遍问题,是铁路提速重载化发展中道床结构要研究解决的关键技术之一。文章介绍TDZⅢ型弹性轨枕枕下垫板的设计以及轨道刚度和轨道动力响应计算。