穿浪双体船耐波性能预报方法研究

基于修正的切片理论的Seakeeper软件可以用来在方案设计阶段对穿浪双体船进行耐波性的理论预报，平均阻力增量除了在Fr〉0．6后误差很大外，其他耐波性指标包括纵摇有义值、升沉有义值和垂向加速度有义值在Fr〈1．0的范围内与船模试验结果相比有较好的精度。     

基于WSN的电力推进船舶电气设备过热监测系统研制

针对目前电力推进船舶普遍采用有线进行电气设备过热监测的局限性,结合无线传感器网络(WSN)技术,研制了一种基于WSN的电力推进船舶电气设备过热监测系统。设计并制作了中心节点和传感器节点的硬件,编写了过热监测的软件并创新性的采用软件动态休眠节能和发射功率控制的方案,有效的延长了系统的使用寿命。结果表明该系统实现了电气设备过热的精确测量,实验室数据测试证明其和有线测量可以达到同样的精度。     

Time taken for residents to adopt a new public transport service: examining heterogeneity through duration modelling

When a new public transport service is introduced it would be valuable for public authorities, financing organisations and transport operators to know how long it will take for people to start to use the service and what factors influence this. This paper presents results from research analysing the time taken for residents living close to a new guided bus service to start to use (or adopt) the service. Data was obtained from a sample of residents on whether they used the new service and the number of weeks after the service was introduced before they first used it. Duration modelling has been used to analyse how the likelihood of starting to use the new service changes over time (after the introduction of the service) and to examine what factors influence this. It is found that residents who have not used the new service are increasingly unlikely to use it as time passes. Those residents gaining greater accessibility benefits from the new service are found to be quicker to use the service, although the size of this effect is modest compared to that of other between-resident differences. Allowance for the possibility that there existed a proportion of the sample that would never use the new service was tested using a split population model (SPD) model. The SPD model indicates that 36% of residents will never use the new service and is informative in differentiating factors that influence whether Route 20 is used and when it is used.

大型地下互通式立交型式选择和路线标准研究

文章通过对地下和地面立交对比分析,给出了三路和四路地下立体交叉的几种立交型式建议;并从造价和行车安全的角度,给出了地下立交分岔隧道的部分路线标准确定方法。在地下隧道立交的选型中,应尽量选取少交叉口、少叠交层次和行车视距较好的型式。在路线标准的选择中,尤其要注意满足运营速度下的停车视距,以保障行车安全。在考虑安全因素的同时,经济性和工程造价也是决定隧道型式和路线标准的重要因素。     

基于TBM工法的隧洞工程进度定量分析——以引红济石隧洞工程TBM段为例

文章结合QTBM理论,对引红济石隧洞工程前期的开挖进度数据进行了分析统计,结果表明:该工区TBM在Ⅲ类、Ⅳ类围岩中掘进速率较为稳定,而在V类围岩中掘进速率较低;同时,获得了适合该工区的岩体品质参数以及TBM净掘进速率、平均使用率等相关参数;并据此对该工程TBM待开挖段的工程进度进行预测,预测表明剩余6600m的开挖尚需...     

RCF-RPWM策略的功率谱分析及优化设计

在DC-AC变换器中,通过对载波频率的随机化处理,可以把输出电压的离散谱转换成连续谱,降低功率谱的峰值,达到抑制声学噪声和降低电磁干扰的目的.文中推导了采用随机载波频率RPWM策略逆变器开关函数的功率谱密度解析表达式,实验结果验证了其正确性.通过引入特征函数,提出了采用有限点载波频率进行随机时,开关频率选取的优化准则,仿真结果验证了其有效性.     

Joint user and antenna selection for multiuser MIMO downlink with block diagonalization

User selection is necessary for multiuser multiple-input multiple-output (MIMO) downlink systems with block diagonalization (BD) due to the limited free spatial transmit dimensions. The pure user selection algorithms can be improved by performing receive antenna selection (RAS) to increase sum rate. In this paper, a joint user and antenna selection algorithm, which performs user selection for sum rate maximization in the first stage and then performs antenna selection in the second stage, is proposed. The antenna selection process alternately drops one antenna with the poorest channel quality based on maximum determinant ranking (MDR) from the users selected during the first stage and activates one antenna with the maximum norm of projected channel from the remaining users. Simulation results show that the proposed algorithm significantly outperforms the algorithm only performing user selection as well as the algorithm combining user selection with MDR receive antenna selection in terms of sum rate.     

交通信号灯相关标准及规范中存在的问题

分析了《道路交通信号灯》(GB14887)《中华人民共和国道路交通全法实施条例》及《道路交通信号灯安装规范》(GB14886)对交通信号灯的技术要求,指出了标准及规范在实际应用中存在的问题,针对问题提出了相应的解决对策,同时对相关的标准及规范给出了改进建议。     

拉萨柳梧大桥主墩基础设计变更与施工质量控制

针对拉萨河流特殊的水文、地质条件,对柳梧大桥主桥主跨8个预制下沉沉井基础进行了设计变更,变更为排桩地下连续墙组合式扩大基础,这样,既满足了基础受力要求,又解决了基础抗冲刷问题,同时还避免了沉井下沉过程中的施工风险。     

土工离心模型试验原理与若干问题分析

土工离心机试验是利用离心机所产生的离心力场，来提高土工模型的体积力，进而模拟原型在自然重力场下的行为。昭模型试验可在保证原型与模型几何相似的前提下，保持它们的力学特性相似，应力应变相同，破坏机理相同，变形相似。离心模型试验也存在离心场径向和切向误差、启动与制动带来的误差和粒径效应、边界效应、工况和动力模拟、局部模拟等问题，在试验中应予重视并努力克服。