Simulation of HCCI combustion with spatial inhomogeneities via a locally deterministic approach

There has been recent interest in a new engine type, Homogeneous Charge Compression Ignition (HCCI), to combine the advantages of SI and CI engines. In this paper, a locally deterministic approach is employed to consider spatial inhomogeneities using the KIVA-CHEMKIN package. Validation is performed for two experimental HCCI engines fueled, respectively, by hydrogen and n-heptane. The full mechanism for hydrogen and a skeletal mechanism for n-heptane are used for combustion chemistry. Differences in the reaction flow paths are shown at ignition and the heat release reaction stages of the two fuels. Results show good agreement between measured and calculated pressures for different initial mixture temperatures with estimated residual fractions. A parametric study is performed in both engines to consider the influences of the physical parameters wall temperature, swirl ratio and global equivalence ratio. The ignition time of n-heptane is shown to be relatively insensitive to variations in these parametric due to its two-stage ignition behavior.     

Computer Aided Simulation on Precision Cold Forging of Universal Joint Cross

IntroductionThefiwtee1emenmethod(FEM)playsanextrmelyimPortantroleintheanalysesofengineeringproblems.ForalongtimethismethodhasmainlybeenaPPliedinthelinearfieldandshownitsgreatpower.HoweveealOtofnonlinearengineeringPrOblemsWhichcanneitherbesimPlyreducedtolinearonesnorrCPresentedbylinearlyanalogywhichshallchnsethePfacticalconditionsrelativelymuch,havechallengedfiniteelementmethod(FEM).RecentymuchProgresshasbeenmadebothinthemathematicalandmechanicaltheoryandthecomPulertechnologysothatevent…     

Large-amplitude motion responses of a Ro–Ro ship to regular oblique waves in intact and damaged conditions

This article presents a nonlinear time-domain simulation method for the prediction of large-amplitude motions of a Ro–Ro ship in regular oblique waves in an intact and a damaged condition. Numerical computations and model tests have been carried out to investigate the dynamic motion responses of Ro–Ro ship Dextra to various wave amplitudes at three different wave headings. The results of numerical and experimental investigations for stern quartering waves are reviewed. Comparisons between predictions and measurements show good agreement except in the roll-resonant region. Nonlinear effects are significant in horizontal modes of motion, and resonant roll motion, and there is strong coupling between all modes of motion in the roll-resonant region for large-amplitude responses. On the other hand, the time-domain simulation technique suffers from numerical drift in horizontal modes of motion as wave amplitude increases. This is due to nonlinear equations of motion and the lack of a restoring force and moment in horizontal motion. Received: April 30, 2002 / Accepted: August 9, 2002 Acknowledgments. II Programme of the European Community Commission under contract No. BRPR-CT97-0513. Address correspondence to: H.S. Chan (hoi-sang.chan@ncl.ac.uk)     

Vertical Load-Deflection Behaviour of a Pneumatic Tire Subjected to Slip and Camber Angles

In this paper the vertical load-deflection behaviour of a pneumatic tire has been studied theoretically. A simple mathematical model which is especially suitable for a tire applied by a side force has been developed. Researches carried out in the past show that the tire vertical stiffness varies neither proportionally nor symmetrically as the slip angle of a cambered tire is changed. This effect can be explained by the theory developed here.

The model predictions have been verified using experimental results obtained from literature. Moreover, tire cornering characteristic curves obtained under different test conditions, i. e. during increasing of the slip angle the vertical load is kept constant or not, have been discussed through a simulation example. This study shows that the characteristic curves vary rather considerably under the different conditions.     

「台湾桃园国际机场联外捷运系统建设计划」地下工程的设计与施工

介绍「台湾桃园国际机场联外捷运系统建设计划」中机场区段地下工程的设计成果,并探讨施工时将面临的主要工程问题如,潜盾隧道穿越营运中的机场滑行道下方需考虑对其进行保护、隧道遭遇既有地锚的处理方式,及明挖覆盖隧道或车站于卵砾石层进行开挖,临时挡土措施及潜盾隧道的掘进作业,需考虑卵砾石大粒径与高硬度的特性等等设计考虑.现有数据显示,透过适当的机具改良、辅助工法的应用及良好的施工管理,即使是在高地下水压的卵砾石层,施作地下连续壁及以潜盾机施作隧道并无太大困难,且施工引致的地表沉陷及施工精度亦可获得良好的控制.     

Steering control of motorcycles using steer-by-wire system

This study proposes a steering control method to improve motorcycle handling and stability. Steer-by-wire (SBW) technology is applied to the motorcycle's steering system to remove characteristic difficulties of vehicle maneuvers. By examining computer simulation using a simplified motorcycle model, the actual rolling angle of the SBW motorcycle is controlled to follow the desired rolling angle intended by the rider. A state feedback control such as linear quadratic control gives the SBW vehicle a good follow-through performance compared with proportional-derivative control because it can decouple rolling motion from the other motions, which affect the rolling motion in the strongly coupled motorcycle system.     

论香港地下空间开发的规划、立法与发展经验

 海滨城市香港山多平地少,土地是极为稀少的资源,但山岭地貌和坚硬晶质火成岩岩体很适合开发地下洞室和隧道。20世纪70年代、80年代起,就开始考虑发展地下空间,以满足都市发展的需求。为此,政府开始有计划地进行工程可行性研究,并进行相关的立法工作,为规范地下空间的开发,建立了一套完整的地下空间开发体系。结合工程实例,就香港地下空间开发的研究、规划、开发、管理和立法作简要介绍。     

Pressure drop and heat transfer of catalyzed diesel particulate filters due to changes in soot loading and flow rate

When soot particles are loaded in a diesel particulate filter, it causes increase in back pressure of the exhaust system. To minimize this pressure drop due to DPF, the filter needs to be regenerated after a certain amount of soot has been accumulated. It is crucial to estimate the correct amount of soot that has been accumulated by measuring the differential pressure. It is also important to understand changes in pressure drop due to flow rate variations of the exhaust gas, since the pressure drop would be influenced by the exhaust flow rate as well as the amount of soot. Furthermore, the heat transfer characteristics of the catalyzed diesel particulate filter (CDPF) are another major issue, as the filter is occasionally exposed to high temperature gas. This study presents the characteristics of pressure drop according to the variation of soot loading and the mass flow rate in CDPF. In addition, heat transfer characteristics in the filter was investigated when a high temperature gas flows into the CDPF. Tests were performed in several CDPF samples having varying amounts of catalyst coating. Experimental results indicate that rig-based experiments are useful in understanding the characteristics of pressure drop in the CDPF. In the cake filtration region, a pressure drop has a proportional relationship according to soot loading and mass flow rate. It was found that an increased catalyst coating may lead to enhanced convective heat transfer.     

Impedance-based and circuit-parameter-based battery models for HEV power systems

The relationship between voltage and current inside a battery, or the impedance, plays an important role in the simulation and design of hybrid electric vehicle (HEV) power systems. This paper proposes a new approach employing the Bode plot for evaluation of equivalent circuit parameters for a lithium polymer battery (LiPB) for HEV application. The main concept of the proposed circuit-parameter-based model approach is the application of a transfer function used to process the frequency response of the battery for calculation of accurate circuit parameters. Additionally, the Bode plot is also applied to derive the impedance-based model directly from frequency response measurements for short time simulations and practical use in the HEV. Two methods for battery modeling are proposed and verified experimentally with the voltage-current profile of a conventional HEV using the battery measured in this paper. The results show that the proposed circuit-parameter-based technique provides a satisfactory battery equivalent circuit model.