Analysing Demand for Suburban Trips: A Mixed RP/SP Model with Latent Variables and Interaction Effects

We analyse mode choice behaviour for suburban trips in the Grand Canary island using mixed revealed preference (RP)/stated preference (SP) information. The SP choice experiment allowed for interactions among the main policy variables: travel cost, travel time and frequency, and also to test the influence of latent variables such as comfort. It also led to discuss additional requirements on the size and sign of the estimated model parameters, to assess model quality when interactions are present. The RP survey produced data on actual trip behaviour and was used to adapt the SP choice experiment. During the specification searches we detected the presence of income effect and were able to derive willingness-to-pay measures, such as the subjective value of time, which varied among individuals. We also studied the systematic heterogeneity in individual tastes through the specification of models allowing for interactions between level-of-service and socio-economic variables. We concluded examining the sensitivity of travellers’ behaviour to various policy scenarios. In particular, it seems that contrary to political opinion, in a crowded island policies penalising the use of the private car seem to have a far greater impact in terms of bus patronage than policies implying direct improvements to the public transport service.     

Safety of child passengers who ride to school on a motorcycle: An observational study in two Argentine cities

In low- and middle-income countries, the motorcycle has increasingly become a means of family transportation due to its low cost and the poor quality of public transportation. Consequently, many child motorcycle passengers are at an elevated risk of serious injury in the event of a traffic crash. The available research on child safety devices is scarce and focused mainly on helmet use, while other devices (e.g. high-visibility clothing) have received little attention. This observational study documented the safety conditions and related factors of primary schoolchildren who rode to school as motorcycle passengers in two cities of Argentina.Data was obtained in the vicinity of 27 public primary schools in two cities of Argentina (one mid-sized city and the other a small city by the country's standards) between May 2018 and September 2019. A total of 1440 motorcycle occupants (656 drivers and 784 child passengers) were observed.The use of an adequate helmet was lower among children (vs. drivers). Most of the children were unable to reach the motorcycle's footrests, did not use high-visibility clothing or a fastening device, carried a backpack, and mounted and dismounted the motorcycle in an unsafe place. Some children rode in front of the driver or in a motorcycle with three or four occupants. Use of helmet by drivers and driver sex (woman) were related with an increase in safety in children. The indicators were worse in the larger city.The results revealed a low level of adoption of safety measures in children as well as in adults in both cities. This suggests that motorcycle travel is unsafe. Greater effort is needed to improve motorcycle safety, especially for children. It is important to debate regulatory details such as a minimum age for passengers, a limit on the number of passengers, and other safety criteria. It is also important to conduct educational campaigns that include the distribution of safety devices.     

Correcting injection pressure maladjustments to reduce NOX emissions by marine diesel engines

Emissions from the exhausts of marine diesel engines comprises several different gases including NO_X. These are currently regulated at the international level under Regulation 13 of ANNEX VI of MARPOL 73/78, but this regulation only applies to new engines and is based on bench tests, for only a single engine designated the “parent engine”. Here, the need to take measurements from across their whole range and once in operation on board a vessel is examined. This would not only improve assessment of new equipment against the current regulation, but would also detect defects in the functioning of the engine.     

Seasonality of picophytoplankton chlorophyll a and biomass in the central Cantabrian Sea, southern Bay of Biscay

Seasonal changes in the abundance and biomass of cyanobacteria (Synechococcus and Prochlorococcus) and picoeukaryotes were studied by flow cytometry in the upper layers of the central Cantabrian Sea continental shelf, from April 2002 to April 2006. The study area displayed the typical hydrographic conditions of temperate coastal zones. A marked seasonality of the relative contribution of prokaryotes and eukaryotes was found. While cyanobacteria were generally more abundant for most of the year (up to 2.4 10⁵ cells mL^− 1), picoeukaryotes dominated the community (up to 10⁴ cells mL^− 1) from February to May. The disappearance of Prochlorococcus from spring through summer is likely related to shifts in the prevailing current regime. The maximum total abundance of picophytoplankton was consistently found in late summer–early autumn. Mean photic-layer picoplanktonic chlorophyll a ranged from 0.06 to 0.53 µg L^− 1 with a relatively high mean contribution to total values (33 ± 2% SE), showing maxima around autumn and minima in spring. Biomass (range 0.58–40.16 mg C m^− 3) was generally dominated by picoeukaryotes (mean ± SE, 4.28 ± 0.27 mg C m^− 3) with an average contribution of cyanobacteria of 30 ± 2%. Different seasonality of pigment and biomass values resulted in a clear temporal pattern of picophytoplanktonic carbon to chlorophyll a ratio, which ranged from 10 (winter) to 140 (summer). This study highlights the important contribution of picoplanktonic chlorophyll a and carbon biomass in this coastal ecosystem.     

Spatial variability of the barotropic M2 constituent tidal current over the Rías Baixas Galician shelf (NW Spain)

Using current meters and systematically repeated vessel mounted ADCP data legs, we describe the role of the semidiurnal and diurnal constituents in the tidal currents and investigate the mesoscale variability of the M₂ tidal currents field along three cross-shelf legs over the Galician shelf. We found that the estimated values of the semi-major axes of the main semidiurnal tidal constituents are closely related to those obtained in previous research and that the tidal currents are predominantly semidiurnal. Amplitudes of the M₂ and S₂ semi-major axes constituents are comparable, and important fortnightly variability should thus be expected in the amplitude of the semidiurnal tidal currents. Vertical profiles of the semi-major axes of the main tidal constituents reveal that, in the absence of stratification, and far from the bottom frictional effects, the tidal currents are mostly barotropic. Over the slope, the tidal ellipses tilt from a north–south orientation toward the northeast–southwest direction and, as we go further into the shelf, their amplitude is increased, a feature that is reasonably explained by the transition from the dynamics of a Poincaré wave offshore to the dynamics of a northward alongshore propagating Kelvin wave over the shelf. The Ría de Vigo exerts a notable influence over the tidal currents, acting as an extension of the shelf and introducing a meridional variation in the orientation of the ellipses from the alongshore direction in the southern straight coast toward the northeast–southwest direction at the latitude of the Rías. Finally, the spatial fitting methods we tried have proved to be successful in VMADCP data detiding in this region.     

A topological route choice model for metro

This article presents a route choice model for public transit networks that incorporates variables related to network topology, complementing those found in traditional models based on service levels (travel time, cost, transfers, etc.) and users’ socioeconomic and demographic characteristics (income level, trip purpose, etc.). The topological variables represent concepts such as the directness of the chosen route and user knowledge of the network. For both of these factors, the necessary data is endogenous to the modelling process and can be quantified without the need for information-gathering beyond what is normally required for building route choice models. Other novel variables in the proposed formulation capture notions of user comfort such as vehicle occupancy rates and certain physical characteristics of network stations. We conclude that these new variables significantly improve the explanatory and predictive ability of existing route choice specifications.     

Gantry crane operations to transfer containers between trains: A simulation study of a Spanish terminal

Freight transfer operations are critical in combined transport networks. In this paper a simulation model and modelling approach to the transfer of cargo between trains at rail terminals is presented. The model is used to study the Port-Bou terminal, the main intermodal terminal at the Spanish-French frontier. Four different gantry crane operation modes to interchange containers between trains are evaluated. These operation rules are tested in several scenarios to examine the critical factors of the system and the best operation rule for each situation. Latest generation software is used to develop the model that incorporates modular programming and enhanced graphic systems for output representation. It allows a dynamic display of the simulated system and, likewise, the possibility of developing modules that can be reused in other studies. The research shows how simulation can be a useful planning tool in the rail transportation context.     

Use of a probabilistic particle tracking model to simulate the Prestige oil spill

A probabilistic particle tracking model is used to simulate the oil dispersion after the Prestige wreckage. This oil spill constitutes a suitable benchmark to analyze the capabilities of a probabilistic model, since the time elapsed from wreckage to oil landing (12 days) is much longer than the reliability time associated with forecast winds, usually on the order of 3–4 days. The particle model can be run in two different modes: real time mode (when existing reliable wind fields for the event under scope) and in probabilistic mode (in absence of reliable wind fields but with historical fields corresponding to a similar period). The validity of the particle model is first evaluated in a hindcast way, running the Prestige case with the wind fields corresponding to the period November 19 to November 30, 2002, which were not available at the moment of the wreckage. Calculations show the accuracy of the model to provide the right impact point and timing. The probabilistic model is then used to simulate the same event by means of historical data. The region where the oil landed is shown to be the area with the highest probability to be impacted.     

Train-Track Interaction and Mechanisms of Irregular Wear on Wheel and Rail Surfaces

Summary High-frequency train-track interaction and mechanisms of wheel/rail wear that is non-uniform in magnitude around/along the running surface are surveyed. Causes, consequences and suggested remedies to relieve the problems are discussed for three types of irregular wheel/rail wear: (1) short-pitch rail corrugation on tangent tracks and large radius curves, (2) wheel corrugation as caused by tread braking, and (3) wheel polygonalisation. The state-of-the-art in modelling of dynamic train-track interaction in conjunction with prediction of irregular wear is reviewed.     

砂井联合超载预压控制软土地基路基工后沉降的优化设计

以经济效益为目标函数,软土地基路基工后沉降、沉降速率双控制指标为约束条件,建立了砂井联合超载预压处理软土地基的优化设计模型。通过一实例,采用遗传算法对控制工后沉降的3个主要设计参数:砂井间距、超载量和预压时间进行了优化求解。按优化的参数结果表明,通常情况下铺轨时加固区主固结沉降已完成,地基的工后主固结沉降大小主要取决于砂井底部的受压土层,控制的主要参数为超载量和预压时间,同时表明了作者所采用方法的有效性。