Shifting urban freight deliveries to the off-peak hours: a review of theory and practice

This paper presents a comprehensive review of the literature on off-peak hour deliveries (OPHD). The review identifies different approaches and policy levers used in the past, such as the laissez-faire approach, a road pricing approach, an incentives approach, and a regulatory approach. The paper also identifies different delivery reception schemes discussed in the literature. The authors complement the theory with a synthesis of pilot tests and the analysis of a set of interviews with practitioners (from the public sector and other organisations) in charge of OPHD programmes. The results from this review show the potential benefits that these programmes could bring about, the challenges faced in the early stages – along with potential solutions – and the significant progress that has been made in this domain in the last decade. According to the review, the results from the pilot tests tend to be positive, suggesting the importance of these programmes to reach more efficient and sustainable transportation systems.     

Relationship between service quality and demand for inter-urban buses

This article proposes a model for analysing the modal choice of travellers making inter-urban journeys. Discrete choice models with systematic and random tastes variation were applied to find the most relevant variables for encouraging the use of public transport by bus rather than private car. This research follows on from the results of previous user satisfaction studies on inter-urban bus services in the province of Burgos (Spain). Willingness to pay is also estimated for time savings or other improvements in the bus service.The results indicate that, in general, improvements in the journey time or the number of daily journeys are valued less by inter-urban bus users than they are by car or railway users. The type of bus and its characteristics are evaluated as a function of the distance travelled and result in very small values for this variable. Contrary to what is often reported in satisfaction surveys, the journey cost is found to be relevant when choosing which mode of transport to use, but the most important variable is journey time. Little value is placed on the features of the bus, except on long distance journeys.Finally, a methodology differentiating four hierarchical groups is presented for comparing the results of the relevant variables in demand and satisfaction models. Some only improve perception rather than encourage new users, while others increase take-up but do not improve the image of the service.     

Airport taxi planning: Lagrangian decomposition

The airport taxi planning (TP) module is a decision tool intended to guide airport surface management operations. TP is defined by a flow network optimization model that represents flight ground movements and improves aircraft taxiing routes and schedules during periods of aircraft congestion. TP is not intended to operate as a stand‐alone tool for airport operations management: on the contrary, it must be used in conjunction with existing departing and arriving traffic tools and overseen by the taxi planner of the airport, also known as the aircraft ground controller. TP must be flexible in order to accommodate changing inputs while maintaining consistent routes and schedules already delivered from past executions. Within this dynamic environment, the execution time of TP may not exceed a few minutes. Classic methods for solving binary multi‐commodity flow networks with side constraints are not efficient enough; therefore, a Lagrangian decomposition methodology has been adapted to solve it. We demonstrate TP Lagrangian decomposition using actual data from the Madrid‐Barajas Airport. Copyright © 2011 John Wiley & Sons, Ltd.     

Generating twins to build weekly time use data from multiple single day OD surveys

Origin-Destination surveys, which are regularly conducted in many cities (to calibrate transport models), contain indirect information on individual time use that can be recovered through the declared trip purpose. Although this data source is very rich, it has two limitations for the calibration of time use models: the level of disaggregation regarding time use is constrained by the definition of trip purposes, and the information gathered on different time periods is usually obtained from different individuals. In this paper we propose a new method to overcome the second limitation, transforming the original daily observations into individual-weeks. For every working day observation we build Saturday and Sunday “twins” as a convex combination of observed weekend individuals such that the distance between the attributes of the working day individual and the synthetic twin is minimized. We applied this procedure to the Santiago OD survey, and generated a database of weekly observations particularly rich for model calibration and segmentation.     

Integrating short turning and deadheading in the optimization of transit services

Urban transit demand exhibits peaks in time and space, which can be efficiently served by means of different fleets, increasing frequencies in those groups of stops with larger passenger inflow. In this paper we develop a model that combines short turning and deadheading in an integrated strategy for a single transit line, where the optimization variables are both of a continuous and discrete nature: frequencies within and outside the high demand zone, vehicle capacities, and those stations where the strategy begins and ends. We show that closed solutions can be obtained for frequencies in some cases, which resembles the classical “square root rule”. Unlike the existing literature that compares different strategies with a given normal operation (no strategy - single frequency), we use an optimized base case, in order to assess the potential benefits of the integrated strategy on a fair basis. We found that the integrated strategy can be justified in many cases with mixed load patterns, where unbalances within and between directions are observed. In general, the short turning strategy may yield large benefits in terms of total cost reductions, while low benefits are associated with deadheading, due to the extra cost of running empty vehicles in some sections.     

Numerical modeling of exhaust smoke dispersion for a generic frigate and comparisons with experiments

The exhaust smoke dispersion for a generic frigate is investigated numerically through the numerical solution of the governing fluid flow, energy, species and turbulence equations. The main objective of this work is to obtain the effects of the yaw angle velocity ratio and buoyancy on the dispersion of the exhaust smoke The numerical method is based on the fully conserved control-volume representation of the fully elliptic Navier-Stokes equations. Turbulence is modeled using a two-equation （k-ε） model The flow visualization tests using a 1/100 scale model of the frigate in the wind tunnel were also carried out to determine the exhaust plume path and to validatc the computational results. The results show that down wash phenomena occurs for the yaw angles between ψ=10° and 20°. The results with different exhaust gas temperatures show that the buoyancy effect increases with the increasing of the exhaust gas temperature. However, its effect on the plume rise is less significant in comparison with its momentum. A good agreement between the predictions and experiment results is obtained.     

Lights, camera and acoustics: Assessing macrobenthic communities at a dredged material disposal site off the North East coast of the UK

This study presents the results of a trial assessment based on a combination of sampling techniques at a dredged material disposal site located off the North East coast of the UK, over 2001 to 2004. The site was surveyed with a high-resolution sidescan sonar system producing a mosaic with 100% coverage of the survey area. Benthic communities and sediments were ground-truthed using a Hamon grab with a video camera. Additionally, the area was also sampled in 2003 with a Sediment Profile Imaging (SPI) camera, which complemented other techniques by providing in situ information on sediment quality, and biogenic activities. An assessment is made of the benefits of combining the results from conventional methods, principally using grab samples, with those from acoustic techniques and optical imaging devices to determine seafloor and macrobenthic conditions. This information has the potential to contribute to the enhancement of routine monitoring programmes within UK waters.     

Sustainability at Spanish ports specialized in liquid bulk: evolution in times of crisis (2010–2015)

In Spain, 28 Port Authorities of general interest moved more than 168 thousand tonnes of liquid bulk (34% of overall traffic) in 2015. Almost 82% of this amount corresponded to eight ports (G-8) that have a refinery within their facilities. This unique degree of specialization and concentration makes this set of ports an ideal sample to analyse the evolution of their sustainability levels, particularly during the crisis started in 2008 and onwards. A proprietary methodology based on Multidimensional Synthetic Indices has been used. The comparison of the findings obtained for 2010 and 2015 allows a diagnosis of the evolution of port sustainability measured through the economic, institutional, environmental and social dimensions to be established, as well as a study of the patterns of behaviour that each port has followed in this issue.     

Parametric roll mitigation using rudder control

Severe roll angles can be developed by parametric excitation in relatively moderate weather without any apparent pre-warning for the crew onboard. In this study the prospect of using rudder control to mitigate parametric roll was investigated using multi-degree of freedom simulations. A typical modern Pure Car and Truck Carrier was considered and modelled by coupling a roll model with a planar motion manoeuvring model. The combined model was calibrated using in-service, full-scale trials and model tests. Irregular variations of the metacentric height were applied to simulate recorded, full-scale events of parametric roll that have occurred with the considered design. These simulations with rudder roll control showed promising results and demonstrate that the approach could be very efficient for mitigation of parametric roll.     

Blast Pressure Measurements of an Underwater Detonation in the Sea

Blast pressure measurements of a controlled underwater explosion in the sea were carried out. An explosive of 25-kg trinitro-toluene (TNT) equivalent was detona...