Modeling the interactions between car and bicycle in heterogeneous traffic

In this paper, a new cellular automata model is proposed to simulate the car and bicycle heterogeneous traffic on urban road. To capture the complex interactions between these two types of vehicles, a novel occupancy rule is adopted in the proposed model to consider the variable lateral distances of mixed vehicular traffic. Based on massive simulations, microscopic fundamental diagrams under different bicycle densities are devised. With these, the bicycle's spilling behavior is then investigated and discussed. In order to reflect the interference of a bicycle on a car, the interference transformation from friction state to block state is modeled explicitly. Finally, different simulation results under different occupancy rules indicate that the constant and fixed occupancy rule adopted in the previous studies might lead to overestimation of car flux in the heterogeneous traffic flows with different bicycle densities. Copyright © 2013 John Wiley & Sons, Ltd.     

A comparison of modelled and real-life driving profiles for the simulation of railway vehicle operation

A key factor in determining the performance of a railway system is the speed profile of the trains within the network. There can be significant variation in this speed profile for identical trains on identical routes, depending on how the train is driven. A better understanding and control of speed profiles can therefore offer significant potential for improvements in the performance of railway systems. This paper develops a model to allow the variability of real-life driving profiles of railway vehicles to be quantitatively described and predicted, in order to better account for the effects on the speed profile of the train and hence the performance of the railway network as a whole. The model is validated against data from the Tyne and Wear Metro, and replicates the measured data to a good degree of accuracy.     

Modelling and Analysis of Turning Motion of a Subsurface Mapping AUV with Split-Hull Design

There is much need for autonomous underwater vehicles (AUVs) for inspection and mapping purposes. Most conventional AUVs use torpedo-shaped single-rigid hull, b...     

开目CAPP在武船机制的应用

武昌造船厂机械制造分厂(简称武船机制)是武昌造船厂的下属核心企业,主要进行武船配套零部件的工艺设计与制造。在推进信息化建设过程中,采用了开目CAPP解决方案,取得了较好的效果。武船机制工艺信息化系统需求分析1.产品和工艺特点分析(1)产品的质量要求高,工期要求严格,对工艺设计质量和效率有很高的要求。(2)采用按订单生产的方式,进行独立的成本核算和控制。(3)需从总厂ERP系统中提取工程任务树,建立工艺设计与制造任务。设计完成的工艺数据也需按照ERP系统要求的格式进行统计并向ERP系统进行传递。(4)不同订单中的工艺专业种类繁…     

台北公共交通月及无车日活动回顾与展望

台北国际无车日自2002年起举办了5次,由最早的骑自行车活动扩大至包含“走路上学日”与“公共交通月”丰富多彩的系列活动,渐渐获得民众认同。无车日活动的目标是通过活动的倡导和社会参与来改变民众使用交通工具的行为,潜移默化的效应可促使形成可持续交通政策,当可持续交通政策与基础设施建设落实后又可具体改变交通环境,形成良性的循环机制。首先说明了“无车日”的由来,并回顾台北都会区过去5年来举行无车日系列活动的内容与经验,同时基于活动的发展与成果归纳出无车日活动的成功要素,最后提出未来活动将扩大举办的内容、方式与展望,以期能为其他城市作参考。     

Assessment of factors associated with travel time reliability and prediction: an empirical analysis using probabilistic reasoning approach

Significant efforts have been made in modeling a travel time distribution and establishing measures of travel time reliability (TTR). However, the literature on evaluating the factors affecting TTR is not well established. Accordingly, this paper presents an empirical analysis to determine potential factors that are associated with TTR. This study mainly applies the Bayesian Networks model to assess the probabilistic association between road geometry, traffic data, and TTR. The results from this model reveal that land use characteristics, intersection factors, and posted speed limits are directly associated with TTR. Evaluating the strength of the association between TTR and the directly related variables, the log odds ratio analysis indicates that the land use factor has the highest impact (0.83) followed by the intersection factor (0.57). The findings from this study can provide valuable resources to planners and traffic operators in their decision-making to improve TTR with quantitative evidence.     

Subjective well-being and travel: retrospect and prospect

Although the improvement of well-being is often an implicitly-assumed goal of many, if not most, public policies, the study of subjective well-being (SWB) and travel has so far been confined to a relatively small segment of the travel behavior community. Accordingly, one main purpose of this paper is to introduce a larger share of the community to some fundamental SWB-related concepts and their application in transportation research, with the goal of attracting others to this rewarding area of study. At the same time, however, I also hope to offer some useful reflections to those already working in this field. After discussing some basic issues of terminology and measurement of SWB, I present from the literature four conceptual models relating travel and subjective well-being. Following one of those models, I review five ways in which travel can influence well-being. I conclude by examining some challenges associated with assessing the impacts of travel on well-being, as well as challenges associated with applying what we learn to policy.

     

Multi‐objective highway alignment optimization using a genetic algorithm

The available highway alignment optimization algorithms use the total cost as the objective function. This is a single objective optimization process. In this process, travel‐time, vehicle operation accident earthwork land acquisition and pavement construction costs are the basic components of the total cost. This single objective highway alignment optimization process has limited capability in handling the cost components separately. Moreover, this process cannot yield a set of alternative solutions from a single run. This paper presents a multi‐objective approach to overcome these shortcomings. Some of the cost components of highway alignments are conflicting in nature. Minimizing some of them will yield a straighter alignment; whereas, minimizing others would make the alignment circuitous. Therefore, the goal of the multiobjective optimization approach is to handle the trade‐off amongst the highway alignment design objectives and present a set of near optimal solutions. The highway alignment objectives, i.e., cost functions, are not continuous in nature. Hence, a special genetic algorithm based multi‐objective optimization algorithm is suggested The proposed methodology is demonstrated via a case study at the end.     

The Alternative Motor Fuels Act, alternative-fuel vehicles, and greenhouse gas emissions

The corporate average fuel economy (CAFE) standard is the major policy tool to improve the fleet average miles per gallon of automobile manufacturers in the US. The Alternative Motor Fuels Act (AMFA) provides special treatment in calculating the fuel economy of alternative-fuel vehicles to give manufacturers CAFE incentives to produce more alternative-fuel vehicles. AMFA has as its goals an increase in the production of alternative-fuel vehicles and a decrease in gasoline consumption and greenhouse gas emissions. This paper examines theoretically the effects of the program set up under AMFA. It finds that, under some conditions, this program may actually increase the production of fuel-inefficient gasoline vehicles, gasoline consumption and greenhouse gas emissions.     

Developing an enhanced weight-based topological map-matching algorithm for intelligent transport systems

Map-matching (MM) algorithms integrate positioning data from a Global Positioning System (or a number of other positioning sensors) with a spatial road map with the aim of identifying the road segment on which a user (or a vehicle) is travelling and the location on that segment. Amongst the family of MM algorithms consisting of geometric, topological, probabilistic and advanced, topological MM (tMM) algorithms are relatively simple, easy and quick, enabling them to be implemented in real-time. Therefore, a tMM algorithm is used in many navigation devices manufactured by industry. However, existing tMM algorithms have a number of limitations which affect their performance relative to advanced MM algorithms. This paper demonstrates that it is possible by addressing these issues to significantly improve the performance of a tMM algorithm. This paper describes the development of an enhanced weight-based tMM algorithm in which the weights are determined from real-world field data using an optimisation technique. Two new weights for turn-restriction at junctions and link connectivity are introduced to improve the performance of matching, especially at junctions. A new procedure is developed for the initial map-matching process. Two consistency checks are introduced to minimise mismatches. The enhanced map-matching algorithm was tested using field data from dense urban areas and suburban areas. The algorithm identified 96.8% and 95.93% of the links correctly for positioning data collected in urban areas of central London and Washington, DC, respectively. In case of suburban area, in the west of London, the algorithm succeeded with 96.71% correct link identification with a horizontal accuracy of 9.81 m (2σ). This is superior to most existing topological MM algorithms and has the potential to support the navigation modules of many Intelligent Transport System (ITS) services.