e-Navigation and situation-dependent manoeuvring assistance to enhance maritime emergency response

Safe ship handling in every situation and under all prevailing circumstances of ship status and the environment is a core element contributing to the safety of the maritime transportation system. Especially in case of emergencies, there is a need for quick, accurate and reliable information to manoeuvre a ship safely. This paper focusses on investigations into enhanced response to maritime emergencies by means of onboard manoeuvring support. The research and discussions are done exemplarily for person overboard (PoB) accidents. PoB is a typical situation for application of manoeuvring assistance and decision support, e.g. in order to return quickly to the position of the accident. Based on the analysis of selected accident case studies and existing solutions representing the technical state-of-the-art, shortcomings will be identified and discussed, and a potential approach for advanced manoeuvring support in the context of e-Navigation-based requirements will be introduced and discussed.     

Lane changing patterns of bane and benefit: Observations of an uphill expressway

A mechanism is unveiled by which congestion forms on a 3-lane, uphill expressway segment, and causes reductions in output flow. Vehicular lane-changing (LC) is key to the mechanism, particularly LC induced by speed disturbances (SDs) that periodically arise in the expressway’s median and center lanes. Early in the rush, when flow was relatively low in the shoulder lane, drivers readily migrated toward that lane to escape the oncoming SDs. The shoulder lane thus acted as a ‘release valve’ for the high vehicular accumulations created by the SDs, such that forced vehicular decelerations were short-lived. The release valve failed only later in the rush, when flow increased in the shoulder lane in response to rising demand. LC induced by the SDs thereafter became disruptive: the decelerations they imposed spread laterally, and a persistent queue formed in all lanes. Long-run output flow dropped each day by 4-11% once the queue engulfed the base of the incline, and impeded vehicle ascent.Subtle details of this mechanism became visible by examining thousands of vehicle trajectories that were extracted from a series of eleven roadside video cameras. Though these trajectories were collected from only a single day, we suspect that the findings can be generalized to other days at the present site, and to other sites. This is because: (i) conspicuous features of the mechanism were repeatedly observed in loop detector data that were measured over many days at the site; (ii) these macroscopic features are consistent with observations previously made at other sites; and (iii) the more subtle details unveiled by the trajectories are compatible with a general theory of multi-lane traffic.     

Low cost two dimension navigation using an augmented Kalman filter/Fast Orthogonal Search module for the integration of reduced inertial sensor system and Global Positioning System

Due to their complementary characteristics, Global Positioning System (GPS) is integrated with standalone navigation devices like odometers and inertial measurement units (IMU). Recently, intensive research has focused on utilizing Micro-Electro-Mechanical-System (MEMS) grade inertial sensors in the integration because of their low-cost. In this study, a low cost reduced inertial sensor system (RISS) is considered. It consists of a MEMS-grade gyroscope and the vehicle built-in odometer. The system works together with GPS to provide 2D navigation for land vehicles. With adequate accuracy, Kalman filter (KF) is the commonly used estimation technique to achieve the data fusion of GPS and inertial sensors in case of high-end IMUs. However, due to the inherent error characteristics of MEMS grade devices, MEMS-based RISS suffers from the non-stationary stochastic sensor errors and nonlinear inertial errors, which cannot be handled by KF and its linear error models. To overcome the problem, Fast Orthogonal Search (FOS), a nonlinear system identification technique, is suggested for modeling the higher order RISS errors. As a general-purpose numerical method, FOS algorithm has the ability to figure out the system nonlinearity efficiently with a tolerance of arbitrary stochastic system noise. Even using online short-term training data, this method is still able to build an accurate nonlinear model that predicts the system dynamics. Motivated by the above merits, an augmented KF/FOS module is proposed by cascading FOS algorithm to a traditional KF structure. By estimating and reducing both linear and nonlinear RISS errors, the proposed method is supposed to offer substantial enhancement on the positioning accuracy of MEMS-based RISS during GPS outages. In order to examine the effectiveness of the proposed technique, the KF/FOS module is applied on the low cost RISS together with GPS in a land vehicle for several road test trajectories. The performance of the proposed method is compared to KF-only solution, both assessed with respect to a reference offered by a high-end solution. The experimental results confirm that KF/FOS module outperforms KF-only method. The results also show the applicability of the proposed method for real-time vehicle applications.     

Dynamic and Vibration Analysis of a Vehicle Rear Axle System

A detailed finite element model for the rear axle system of a sport utility vehicle is developed in this investigation. The axle system is treated as a multibody system that consists of nine bodies that include the input shaft, two output shafts, the carrier and tube system, four control arms and a track bar. The rotating input and output shafts are mounted on the carrier and tube system using six bearings. The four control arms and the track bar are connected to the carrier system and the frame of the vehicle using rubber bushings. In the model developed in this investigation, three dimensional beam elements are used to develop the finite element model for the input and output axle shafts, the control arms, and the track bar. A non-conventional finite element formulation is used to develop the equations of motion of the rotating input and output shafts in order to account for the effect of their angular velocities. These equations are expressed in terms of inertia shape integrals that depend on the assumed displacement field. The inertia shape integrals are first evaluated for each finite element. The inertia shape integrals of the rotating shafts are obtained by assembling the inertia shape integrals of its finite elements using a standard finite element assembly procedure. A conventional finite element formulation is used for the control arms and the track bar. The model developed in this investigation includes the effect of the bearing stiffness, the effect of the stiffness of the helical springs of the suspension system, and the effect of the stiffness of the tires. Using the Lagrangian dynamics and the finite element method, the equations of motion of the axle system are developed and expressed in terms of the nodal coordinates of the shafts, the control arms and the track bar as well as the degrees of freedom of the carrier. This finite dimensional model is used to determine the mode shapes and the natural frequencies of the axle system. The discrepancies between several of the natural frequencies predicted using the dynamic model developed in this investigation and natural frequencies determined experimentally are found to be less than 2%. A parametric study is performed in order to investigate the effect of the axle system parameters on the natural frequencies and mode shapes. Using the modal transformation, a set of differential equations of motion of the axle system is developed and used to examine the system dynamics under given loading conditions. The solutions of the resulting equations of motion are obtained using numerical methods.     

Overview of Coupling of Multibody and Control Engineering Tools

The role of Computer Aided Engineering in vehicle development has been significantly increased during the last decade. Specialised simulation tools became very complex, however, growing demands on complexity and particularly interdisciplinarity of vehicles and their simulation models have led to a number of approaches trying either to develop multidisciplinary simulation tools or to connect various specialised simulation tools by interfaces. This paper addresses some aspects of interconnection of the specialised simulation tools as one possibility for simulating complex mechatronic vehicle systems. It classifies the interfaces between specialised software packages in general, mentions some historical development of the interfacing and further discusses the examples of the implemented couplings between the Multibody System codes and Computer Aided Control Engineering tools. Finally, the performance of selected interfaces is compared on an example simulation of a controlled vehicle suspension.     

The Horsepower Reserve Formulation of Driveability for a Vehicle Fitted With a Continuously Variable Transmission

Summary A systematic methodology is developed for choosing the optimum ratio trajectory of a continuously variable transmission in a passenger vehicle. The optimum CVT ratio schedule is formulated as a constrained optimization problem with maximum fuel economy as the objective function and driveability concerns and physical limitations included as the constraints. The key notion to achieving good driveability is the introduction and definition of a horsepower reserve function that creates a consistent and desirable vehicle response under different driving conditions. Simulation results compare the optimized schedule's performance with several other possible ratio schedules, including the minimum brake specific fuel consumption map. Results from the optimized schedule indicate only a mild tradeoff between driveability and fuel economy relative to the other ratio schedules. The ratio optimization problem formulation and solution provide a novel and unique approach for systematically addressing driveability and fuel economy considerations associated with a continuously variable transmission.     

究竟哪个中国公司会最先进驻美国市场?

上月在拉斯维加斯召开美国汽车经销商联席会议时,我在J．D．Power国际圆桌会议被美国经销商狂轰乱炸,一次又一次被问及这样两个问题:谁来了?什么时候进入美国市场?     

悬索桥主缆新型防护涂装系统的应用

广东虎门大桥悬索桥主缆采用了一种有别于传统防腐观念（阴极保护）的新型主缆防护方法，该防护系统选用的聚氨酯涂料ＭａｘｉＦｌｅｘ具有极好的与钢铁粘结能力、很大的延伸率、较小的渗透率和较小的变形性，可对主缆起到很强的防护作用。介绍了该防护系统的构思、物理性能技术参数、防护系统的组成及涂装工艺。     

On the equivalence of common rearrangements for sum constrained travel estimation problems

This paper examines the problem of estimating the parameters of nonlinear sum constrained models by use of rearrangements to permit linear estimation methods. Over the years a number of different, and sometimes ingenious, techniques have been proposed but a remaining difficulty arises from the fact that different rearrangements lead to different parameter estimates. In this paper it is shown that while ordinary least squares certainly results in different estimates, generalised least squares leads to identical parameter estimates provided convergence to the true maximum likelihood estimates is achieved. In particular it is seen that estimates are invariant with choice of base or deletion of one equation and identical for the single base, multinominal logit, geometric mean and link constant versions. The findings of this paper apply to any sum-constrained model and in transportation these occur very frequently as mode choice problems, singly-constrained gravity models, and as route choice models in path assignment. While we develop all results in this paper in the context of an intercity passenger modal market share model, the transferability of these results to other problems should be recognised.