Maintaining the maritime skills base: does the Government have a realistic strategy?

The UK has a requirement for people with seafaring expertise to fill a wide range of jobs in the maritime-related sector of the economy ashore. The pool of seagoing ships' officers has now reached the level where shore-based demand for such officers cannot be satisfied by natural wastage from this pool alone. This paper considers the implications of this for the Government's recently announced strategy for maintaining the maritime skills base. The paper concludes that it is inevitable that the Government's present strategy will fail, and suggests what measures need to be taken if the skills base is to be saved.     

Reliability of Nanofluid Concentration on the Heat Transfer Augmentation in Engine Radiator

Nanofluids, the fluid suspensions of nanomaterial, became a promising fluid that is invoked when heat transfer increase is required. Using of nanofluids as a coolant in the engine radiators is a crucial topic for the thermal engines manufactrers due to the expected enhancement in the cooling process. In this study, Two nanofluids (Al₂O₃/water and CuO/water) flowing in a flat tube of radiator are investigated numerically to evaluate thermal and flow performance. The resizing process for the radiator is performed by using nanofluid instead of water flow. A significant reduction in the radiator volume is achieved due to marked improvement in the heat transfer performance while, the required pumping power after this reduction in the volume is increased over that needed for base fluid. The normalized heat transfer (heat transfer to the pumping power) is found to be a function of both Reynolds number and nanofluid concentration ratio while the ratio of the normalized heat transfer is found to be dependent only on the nanofluid concentration ratio. These dependencies are formulated as general correlations.     

Optimal Linear Active Suspensions with Multivariable Integral Control

In this paper, an optimal suspension system is derived for a quarter-car model using multivariable integral control. The suspension system features two parts. The first part is an integral control acting on suspension deflection to ensure zero steady-sate offset due to body and maneuvering forces as well as road inputs. The second is a proportional control operating on the vehicle system states for vibration control and performance improvement. The optimal ride performance of the active suspensions based on linear full-state feedback control laws with and without integral control together with the performance of passive suspensions are compared.     

The utilisation and user characteristics of Uber services in London

ABSTRACT

Ridesourcing services such as Uber are nowadays a common feature within available transport options of many cities around the world (E.g. London & San Francisco). There has been much publicity about the potential impacts of ridesourcing services and how (or if) they should be managed or regulated without an objective understanding of who uses these services and why, as well as its current and future implications for public transport (PT).

Ridesourcing is part of a broader tech-driven, mobile app-based sharing phenomenon – the ‘sharing economy’ – which has disrupted traditional market models and industries, for example, the transport industry, where new players such as Uber have emerged and have quickly become part of the urban transport landscape. Uber has been at the forefront in disrupting the transport sector since its first launch in 2010 (San Francisco, USA). Since its launch, Uber has generated extensive media coverage and debate among policymakers, transport planners and transport authorities on how these services are affecting traditional transport modes such as buses and taxis. However, without objective empirical data – in terms of impacts on trip making characteristics, PT ridership and congestion – policymakers and transport regulators are yet to fully understand the real impacts ridesourcing services are having on the transport network.

This paper is part of broader research that aims to provide insights and empirical-based evidence on how Uber services are used (UberX and Uberpool) in London. A comprehensive survey was undertaken using a detailed questionnaire, issued to UberX and Uberpool users in London to gather detailed data on who uses the Uber services, why they use it and what are the trip purposes, in order to understand Uber user demographics and what effects (if any) Uber services are having on PT usage and trip making characteristics in London. The final findings provide important insights on Uber user demographics, trip purposes, types of trips replaced, impact on car ownership and why travellers use Uber services.     

Design of a survey to assess prospects for consumer electric mobility in Canada: a retrospective appraisal

Transportation - This paper reviews the process that led to the development of a national survey instrument used to gather over 20,000 observations across Canada. This survey captured aspects of...     

A comparison between PARAMICS and VISSIM in estimating automated field‐measured traffic conflicts at signalized intersections

The main objective of this study is to investigate the relationship between field‐measured conflicts and simulated conflicts estimated from microsimulation model (PARAMICS) using the surrogate safety assessment model. An urban signalized intersection was selected for analysis. Automated video‐based computer vision techniques were used to identify field conflicts. The applicability of a two‐step model calibration procedure applied to VISSIM in a recent study was investigated using PARAMICS. In the first calibration step, the PARAMICS model was calibrated to ensure that the simulation gives reasonable results of average delay times. The second calibration step used a genetic algorithm procedure to calibrate PARAMICS parameters to enhance the correlation between simulated and field‐measured conflicts. Finally, the results obtained from PARAMICS were compared with results obtained from VISSIM. The comparison included three aspects: (i) the car‐following model and safety‐related parameters; (ii) the correlation between simulated and field‐measured conflicts; and (iii) the conflict spatial distributions. The results show that the default simulation model parameters give poor correlation with the field‐measured data, and therefore, using simulation models without a proper calibration should be avoided. Overall, good correlation between field‐measured and simulated conflicts was obtained after calibration for both models, especially at higher time‐to‐collision (TTC) values. At TTC threshold of 1.5 s, PARAMICS overestimates the number of conflicts and VISSIM underestimates it. Both models overestimated the number of conflicts at TTC threshold of 3.00 s. There were major differences between field‐measured and simulated conflicts spatial distributions for both simulation models. This indicates that despite the good correlation obtained from the calibration process, both PARAMICS and VISSIM do not capture the actual conflict occurrence mechanism. Copyright © 2016 John Wiley & Sons, Ltd.     

中美植筋锚固技术对比分析

为了对比中美植筋锚固技术规范中的异同,并为今后国际结构加固工程设计提供参考经验,结合摩洛哥某电厂改造项目,从植筋锚固构造要求和承载力设计值两个方面进行对比分析,并介绍了按美标规范进行的植筋锚固施工。研究结果发现:中美规范对植筋锚固技术的构造要求大体相同;但与美标相比,按中标计算的抗拉和抗剪承载力设计值偏保守。     

Short‐term prediction of traffic parameters—performance comparison of a data‐driven and less‐data‐required approaches

The travel decisions made by road users are more affected by the traffic conditions when they travel than the current conditions. Thus, accurate prediction of traffic parameters for giving reliable information about the future state of traffic conditions is very important. Mainly, this is an essential component of many advanced traveller information systems coming under the intelligent transportation systems umbrella. In India, the automated traffic data collection is in the beginning stage, with many of the cities still struggling with database generation and processing, and hence, a less‐data‐demanding approach will be attractive for such applications, if it is not going to reduce the prediction accuracy to a great extent. The present study explores this area and tries to answer this question using automated data collected from field. A data‐driven technique, namely, artificial neural networks (ANN), which is shown to be a good tool for prediction problems, is taken as an example for data‐driven approach. Grey model, GM(1,1), which is also reported as a good prediction tool, is selected as the less‐data‐demanding approach. Volume, classified volume, average speed and classified speed at a particular location were selected for the prediction. The results showed comparable performance by both the methods. However, ANN required around seven times data compared with GM for comparable performance. Thus, considering the comparatively lesser input requirement of GM, it can be considered over ANN in situations where the historic database is limited. Copyright © 2016 John Wiley & Sons, Ltd.     

Decision fusion of a multi-sensing embedded system for occupant safety measures

The need for an embedded system that can fuse incomplete, inconsistent, and imprecise decisions from several sensing systems is a crucial step in achieving an effective decision for occupant safety measures. This paper deals with the decision fusion strategies of a multi-sensing embedded system to achieve significant enhancement in the reliability of occupant safety through the fused decisions. Multi-sensing approaches to determine weight, vision, and crash sensing are developed for occupant detection, classification, position calculation, and crash detection. A rule-based decision fusion algorithm is then developed to fuse the multi-sensing decisions. The developed sensing systems are incorporated into an embedded device. To execute the embedded system, a system interface between the software and hardware is developed using Lab Window/CVI with the C programming language. The experimental results demonstrated that the real time operation of the embedded system validate the effectiveness of the decision fusion algorithm, characterize the safety measures and monitor the decision application. Several events were tested that prove the performance of the embedded system is robust towards occupant safety measures.     

Thermodynamic analysis of alternative marine fuels for marine gas turbine power plants

The marine shipping industry faces challenges to reduce engine exhaust emissions and greenhouse gases (GHGs) from ships, and in particular, carbon dioxide. International regulatory bodies such as the International Maritime Organization and National Environmental Agencies of many countries have issued rules and regulations to drastically reduce GHG and emissions emanating from marine sources. This study investigates the possibility of using natural gas and hydrogen as alternative fuels to diesel oil for marine gas turbines and uses a mathematical model to assess the effect of these alternative fuels on gas turbine thermodynamic performance. Results show that since natural gas is categorized as a hydrocarbon fuel, the thermodynamic performance of the gas turbine cycle using natural gas was close to that of the diesel case. However, the gas turbine thermal efficiency was found to be slightly lower for natural gas and hydrogen fuels compared to diesel fuel.