Ship Roll Analysis Using CFD-Derived Roll Damping:Numerical and Experimental Study

This study investigates the roll decay of a fishing vessel by experiments and computational fluid dynamics (CFD) simulations. A fishing vessel roll decay is tes...     

Daily activity and travel sequences of students,faculty and staff at a large Canadian university

This paper examines the activity engagement, sequencing and timing of activities for student, faculty and staff commuter groups at the largest university in the Maritime Provinces of Canada. The daily activity patterns of all university community groups are modeled using the classification and regression tree classifier algorithm. The data used for this study are derived from the Environmentally Aware Travel Diary Survey (EnACT) conducted in spring 2016 at Dalhousie University, Nova Scotia. Results show that there are significant differences in activity and travel behavior between university population segments and the general population in the region, and between campus groups. For example, students participate in more recreation activities compared to faculty and staff. They also take more trips to and from campus, and are more flexible in their scheduling of trips. The insights gained from this study will provide helpful information for promoting sustainability across university campuses, and for development of campus-based travel demand management strategies.     

The effectiveness of a European speed limit versus an international bunker-levy to reduce CO2 emissions from container shipping

In the fight to reduce CO₂ emissions from international shipping, a bunker-levy is currently under consideration at the International Maritime Organization (IMO). Faced with the inability of the IMO to reach an agreement in the short term, the European Commission is now contemplating a unilateral measure of a speed limit for all ships entering European Union (EU) ports. This paper argues that this measure is counterproductive for two reasons. Firstly, because it may ultimately generate more emissions and incur a cost per ton of CO₂ which is more than society is willing to pay. Secondly, because it is sub-optimal compared to results obtained if an international bunker-levy was to be implemented. These elements are illustrated using two direct transatlantic services operated in 2010.     

Modeling adoption timing of autonomous vehicles: innovation diffusion approach

Autonomous vehicles (AVs) are expected to act as an economically-disruptive transportation technology offering several benefits to the society and causing significant changes in travel behavior and network performance. However, one of the critical issues that policymakers are facing is the absence of a sound estimation of their market penetration. This study is an effort to quantify the effect of different drivers on the adoption timing of AVs. To this end, we develop an innovation diffusion model in which individuals’ propensities to adopt a new technology such as AVs takes influence from a desire to innovate and a need to imitate the rest of the society. It also captures various sources of inter-personal heterogeneity. We found that conditional on our assumptions regarding the changes in market price of AVs over time, their market penetration in our study region (Chicago metropolitan area) will eventually reach 71.3%. Further, model estimation results show that a wide range of socio-demographic factors, travel pattern indicators, technology awareness, and perceptions of AVs are influential in people’s AV adoption timing decision. For instance, frequent long-distance travelers are found to make the adoption decision more innovatively while those who have experienced an accident in their lifetime are found to be more influenced by word of mouth.     

Response spectrum method for extreme wave loading with higher order components of drag force

Response spectra of fixed offshore structures impacted by extreme waves are investigated based on the higher order components of the nonlinear drag force. In this way, steel jacket platforms are simplified as a mass attached to a light cantilever cylinder and their corresponding deformation response spectra are estimated by utilizing a generalized single degree of freedom system. Based on the wave data recorded in the Persian Gulf region, extreme wave loading conditions corresponding to different return periods are exerted on the offshore structures. Accordingly, the effect of the higher order components of the drag force is considered and compared to the linearized state for different sea surface levels. When the fundamental period of the offshore structure is about one third of the main period of wave loading, the results indicate the linearized drag term is not capable of achieving a reliable deformation response spectrum.     

Path-following in model predictive rollover prevention using front steering and braking

In this paper vehicle path-following in the presence of rollover risk is investigated. Vehicles with high centre of mass are prone to roll instability. Untripped rollover risk is increased in high centre of gravity vehicles and high-friction road condition. Researches introduce strategies to handle the short-duration rollover condition. In these researches, however, trajectory tracking is affected and not thoroughly investigated. This paper puts stress on tracking error from rollover prevention. A lower level model predictive front steering controller is adopted to deal with rollover and tracking error as a priority sequence. A brake control is included in lower level controller which directly obeys an upper level controller (ULC) command. The ULC manages vehicle speed regarding primarily tracking error. Simulation results show that the proposed control framework maintains roll stability while tracking error is confined to predefined error limit.     

Economic conditions for minibus usage in a multimodal feeder network

The introduction of minibuses into the transit fleets of some cities makes it more important than ever to investigate the economic and operating conditions of these vehicles for various transit and paratransit services. A high performance transit system is of great interest, owing to its desirable characteristics. However, it is not feasible to establish and use such a system all over a city. It is therefore necessary to support a high performance transit system with other modes to extend its area of operation (owing to higher demand) and also to connect those areas that are not covered by the high performance system to it. This paper considers the use of minibuses in the design of metro line feeders and to characterize the economic domain in which it is efficient to use them in a feeder network. Based on results from ant colony optimization, the performance measures of minibuses are compared with those of conventional buses to help make decision makers aware of the use and role of these vehicles. The study contradicts the common belief that, since minibuses require similar driver costs to those of conventional buses, it is not economical to use them in a transit fleet; in fact, it is shown that minibuses can displace conventional buses in some situations in a feeder network.     

Geometric stress distribution along the weld toe of the outer brace in two-planar tubular DKT-joints: Parametric study and deriving the SCF design equations

Regarding the research efforts expended so far on the calculation of stress concentration factors (SCFs) in tubular joints, two major shortcomings can be noted: (a) significant effort has been devoted to the study of SCFs in various uni-planar connections. Nevertheless, for multi-planar joints which cover the majority of practical applications, very few investigations have been reported due to the complexity and high cost involved; (b) majority of these research works focused on the study of SCFs at certain positions such as the saddle, crown toe, and crown heel, and they have ignored the hot-spot stress (HSS) at other positions along the weld toe. In the present paper, effects of dimensionless geometrical parameters on the SCF distribution along the weld toe of main (outer) braces in the axially loaded right-angle two-planar tubular DKT-joints are investigated. In order to study the multi-planar effect, SCF distribution in two-planar joints is compared with the distribution in a uni-planar joint having the same geometrical properties. A complete set of SCF database is constructed based on the two-planar DKT-joint Finite element models which are verified against experimental results and the predictions of Lloyd’s Register (LR) equations. The FE models cover a wide range of geometrical parameters. Six new SCF parametric formulae are developed through nonlinear regression analyses for the accurate and reliable fatigue design of two-planar DKT-joints under axial loads. An assessment study of these equations is conducted against the experimental data, the original FEM database and the acceptance criteria recommended by the UK Department of Energy.     

Reliability-based network flow estimation with day-to-day variation: A model validation on real large-scale urban networks

Day-to-day variation in the travel times of congested urban transportation networks is a frustrating phenomenon to the users of these networks. These users look pessimistically at the path travel times, and learn to spend additional time to safeguard against serious penalties that await late arrivals at the destinations. These additional expenses are charges similar to the tolls in system equilibrium flow problem, but may not be collected. With this conjecture, the user equilibrium (UE) formulation of congested network flow problem would lack some necessary factors in addressing appropriate path choices. This study, following a previous work proposing pessimistic UE (PUE) flow, aims to show how to measure this additional travel cost for a link, and investigates how different is PUE from UE, and when such differences are pronounced. Data are collected from the peak-hour travel times for the links of paths in the city of Tehran, to estimate the variance of travel times for typical links. Deterministic functions are obtained by calibrating the standard deviation of the daily variations of link travel times, and probabilistic functions by the technique of copula. UE and PUE traffic assignment models are built and applied to three large cities of Mashhad, Shiraz, and Tehran in Iran. The results show that the estimated flows by PUE model replicate the observed flows in screen lines much better than the UE model, particularly for longer trips. Since PUE is computationally equivalent to UE, this improvement is attained virtually at no cost.