Flame propagation model for a rotary Atkinson cycle SI engine

The rotary Atkinson cycle engine includes two modes of combustion: combustion initiation and propagation in ignition chamber and then flame jet entrainment and propagation in expansion chamber. The turbulent flame propagation model is a predictive model for SI engines which could be developed for this type of combustion for the rotary Atkinson engine similar to the congenital engine with pre-chamber; in split combustion chamber SI engines, small amount of fuel is burned in pre-chamber while the fuel burned in ignition chamber of rotary Atkinson cycle is considerable. In this study a mathematical modeling of spherical flame propagation inside ignition chamber and new combined conical flame and spherical flame propagation model of a new two-stroke Atkinson cycle SI engine will be presented. The mathematical modeling is carried out using two-zone combustion analysis and the model also is validated against experimental tests and compared with previous study using non-predictive Weibe function model.     

Automated driving recognition technologies for adverse weather conditions

During automated driving in urban areas, decisions must be made while recognizing the surrounding environment using sensors such as camera, Light Detection and Ranging (LiDAR), millimeter-wave radar (MWR), and the global navigation satellite system (GNSS). The ability to drive under various environmental conditions is an important issue for automated driving on any road. In order to introduce the automated vehicles into the markets, the ability to evaluate various traffic conditions and navigate safely presents serious challenges. Another important challenge is the development of a robust recognition system can account for adverse weather conditions. Sun glare, rain, fog, and snow are adverse weather conditions that can occur in the driving environment. This paper summarizes research focused on automated driving technologies and discuss challenges to identifying adverse weather and other situations that make driving difficult, thus complicating the introduction of automated vehicles to the market.     

Mooring Damage Identification of Floating Wind Turbine Using a Non-Probabilistic Approach Under Different Environmental Conditions

This paper discusses the damage identification in the mooring line system of a floating wind turbine (FWT) exposed to various environmental loads. The proposed ...     

Telecommuting Suitability Modeling: An Approach Based on the Concept of Abstract job

A new approach to modeling telecommuting suitability is proposed in this paper. The approach, based on the concept of abstract job, can be employed to assess the level of suitability for telecommuting of the bundle of tasks comprising a job. By abstract job is meant a way of considering jobs on the basis of their elements and tasks, representing the general structure of the job. In this study, the basic tasks a job is composed of, pertaining to telecommuting suitability, are identified. To show the applicability of the approach, discrete choice models are calibrated, based on a sample of 245 employees in Tehran, Iran, indicating that from among the 6 tasks identified, 5 tasks are significantly associated with the level of telecommuting suitability.     

Investigation of pitch motion portion in vertical response at sides of a Tension-Leg Platform

Tendons vertically moor Tension-Leg Platforms (TLPs), thus, a deep understanding of physical tendon stresses requires the determination of the total axial deformation of the tendons, which is a combination of the heave, pitch, and surging responses. The vertical motion of the lateral sides of the TLP is coupled with surge and constitutes a portion of the pitch motion. Tendons are connected to the sides of the TLP; hence, the total displacement of the lateral sides is related to the total deformation of the tendons and the total axial stress. Therefore, investigating the total vertical response at the sides of the TLP is essential. The coupling between various degrees of freedom is not considered in the Response Amplitude Operator (RAO). Therefore, in frequency domain analysis, the estimated vertical RAO is incomplete. Also, in the time domain, only the heave motion at the center of TLP is typically studied; this problem needs to be addressed. In this paper, we investigate the portion of the pitch motion in the vertical response at the sides of the TLP in both the frequency and time domains. Numerical results demonstrate a significant effect of the pitch motion in the vertical motion of the edges of the TLP in some period ranges.     

Seismic response of liquid-filled tank with baffles

In thispaper, the effects of a rigid baffle on the seismic response of liquid in a rigid cylindrical tank are evaluated. A baffle is an annular plate which supplies a kind of passive control on the effects of ground excitation. The contained liquid is assumed incompressible, inviscid and has irrotational motion. To estimate the seismic response, the method of superposition of modes has been applied. To analyze the rigid tank response, Laplace＆#39;s equation is considered as the governing equation of the fluid domain, in both time and frequency domains. The boundary element method （BEM） is employed to evaluate the natural modes of liquid in a cylindrical tank. To gain this goal, the fluid domain is divided into two upper and lower parts partitioned by the baffle. Linearized kinematic and dynamic boundary conditions of the free surface of the contained liquid have been considered.     

Improving the efficiency of weigh in motion systems through optimized allocating truck checking oriented procedure

In the present paper, an effective procedure is proposed to determine the best location(s) for installing Weigh in Motion systems (WIM). The main objective is to determine locations for best performance, defined as the maximum number of once-checked trucks' axle loads and minimizing unnecessary actions. The aforesaid method consists of two main stages, including solving shortest path algorithm and selecting the best location for installing WIM(s). A proper mathematical model has also been developed to achieve objective function. The number of once-checked trucks, unnecessary actions and average installing costs are defined as criteria measures. The proposed procedure was applied in a road network using experimental data, while the results were compared with the usual methods of locating enforcement facilities. Finally, it is concluded that the proposed procedure seems to be more efficient than the traditional methods and local experts' points of view.     

Stockholm congestion charging: an assessment with METROPOLIS and SILVESTER

This paper reviews and compares the performance of two dynamic transportation models – METROPOLIS and SILVESTER – which are used to predict the impacts of congestion charging for Stockholm. Both are mesoscopic dynamic models treating accumulation and dissipation of traffic queues, route choice, modal split and departure time choice. The models are calibrated independently for the baseline situation without charges and applied to forecast the effects of congestion charging. The results obtained from the two models are mutually compared and validated against the actual outcome of the Stockholm congestion charging scheme. Both models successfully predict the outcomes of the congestion charging trial at both aggregate and disaggregate levels. Results of welfare analysis, however, differ substantially due to differences in model specification.     

A multiple correspondence analysis of at‐fault motorcycle‐involved crashes in Alabama

According to the U.S. National Highway Traffic Safety Administration, in 2012, more than 4950 motorcyclists were killed in traffic accidents. Compared to passenger car occupants, mile for mile, motorcyclists are more than 26 times more at risk to dying in crashes. Due to the high fatality rate associated with motorcycle crashes, factors contributing to this type of crash must be identified in order to implement effective safety countermeasures. Given that the available datasets are large and complex, identifying the key factors contributing to crashes is a challenging task. Using multiple correspondence analysis, as an exploratory data analysis technique to determine the dataset structure, we identified the roadway/environmental, motorcycle, and motorcyclist‐related variables influencing at‐fault motorcycle‐involved crashes. This study used the latest available dataset (2009 to 2013) from the Critical Analysis Reporting Environment database to study motorcycle crashes in the state of Alabama. The most significant contributors to the frequency and severity of at‐fault motorcycle‐involved crashes were found to be light conditions, time of day, driver condition, and weather conditions. Copyright © 2017 John Wiley & Sons, Ltd.     

Assessing the effect of inattention-related error and anger in driving on road accidents among Iranian heavy vehicle drivers

Extensive studies have examined the effect of variables such as demographic characteristics, insomnia, and working conditions of drivers individually on inattention-related error as well as expression of anger in driving. Nevertheless, so far no study has tested the concurrent effect of these factors on crashes. This study has dealt with indirect investigation of the effect of variables including demographic characteristics, insomnia, and working conditions of drivers on inattention-related error and expression of anger in driving (as mediation model). Next, the effect of these two variables on the probability of incidence of road crashes has been assessed among truck drivers. For this purpose, 780 Iranian truck drivers were interviewed by validated questionnaires including insomnia severity index (ISI), attention related driving errors scale (ARDES), and driving anger expression (DAX). To confirm the validity of these questionnaires, confirmatory factor analysis (CFA) was used. Next, structural equation modeling (SEM) was employed for investigating the relationships between these latent variables and truck drivers' demographic characteristics, working conditions and their crash involvement. SEM results indicated that as the severity of insomnia among drivers increased, they committed more inattention-related errors, and also expressed more anger during driving. Generally, the results of this study indicated that with increase in the extent of experience and safety knowledge of drivers and improvement in their working conditions and their sleep status, it is possible to reduce inattention-related error and expression of anger during driving among heavy vehicle drivers.