Experimental study on reflection coefficient of curved perforated plate

A set of experiments is carried out in a towing tank to study the effects of the curvature of perforated plates on the wave reflection coefficient (C _r ). The curvature of a perforated plate can be changed by rotating a reference perforated plate aboutits origin according to the parabolic equation y=?x ². A plunger-type wave maker is used to generate regular waves. The reflection coefficients are calculated using Goda and Suzuki’s (1976) method. The results are compared with those of vertical or sloped passive wave absorbers. The comparison shows that a perforated plate with a curved profile is highly efficient in terms of reducing the wave reflection coefficient. A correlation is established to estimate the reflection coefficient of curved perforated plates as a function of both flow and geometry characteristics.     

Distribution of suspended sediment in the coastal sea off the Ganges–Brahmaputra River mouth: observation from TM data

Remote sensing technique was applied to estimate suspended sediment concentration (SSC) and to understand transportation, distribution and deposition of suspended sediment in the estuary and throughout the coastal sea, off the Ganges–Brahmaputra River mouth. During low river discharge period, zone of turbidity maximum is inferred in the estuary near the shore. SSC map shows that maximum SSC reaches 1050 mg/l in this period. Magnitude of SSC is mainly owing to resuspension of the bottom surface sediments induced by tidal currents flowing over shallow water depths. The influence of depth on resuspension is farther revealed from the distribution and magnitude of SSC along the head of Swatch of No Ground (SNG) submarine canyon. During high river discharge period, huge river outflow pushed the salt wedge and flashes away the suspended sediments in the coastal sea off the river mouth. Zone of turbidity maximum is inferred in the coastal water approximately within 5–10 m depth of water, where the maximum SSC reaches 1700 mg/l. In this period, huge fluvial input of the suspended sediments including the resuspended bottom sediments and the particles remaining in suspension for longer period of time since their initial entry control mainly the magnitude of SSC. In the estuary near the shore, seasonal variation in the magnitude of SSC is not evident. In the coastal sea (>5 m water depth), seasonal influence in the magnitude of SSC could be concluded from the discrepancy between SSC values of two different seasons. Transportation and deposition of suspended sediments also experiences seasonal variations. At present, suspended sediments are being accumulated on the shallow shelf (between 5 and 10 m water depth) in low discharge period and on the mid-shelf (between 10 and 75 m water depth) during high discharge period. An empirical (exponential) relationship was found between gradual settle down of suspended sediments in the coastal sea and its lateral distance from the turbidity maximum.     

Experimental Investigation of the Effect of Bow Profiles on Resistance of an Underwater Vehicle in Free Surface Motion

In this paper, towing tank experiments are conducted to study the behavior of flow on a model of the underwater vehicle with various shapes of bows, i.e. tango and standard bows in free surface motion ...     

双平面焊接圆管截面DKT节点的中心撑杆鞍点及冠点位置的应力集中系数(英文)

A set of parametric stress analyses was carried out for two-planar tubular DKT-joints under different axial loading conditions.The analysis results were used to present general remarks on the effects of the geometrical parameters on stress concentration factors(SCFs) at the inner saddle,outer saddle,and crown positions on the central brace.Based on results of finite element(FE) analysis and through nonlinear regression analysis,a new set of SCF parametric equations was established for fatigue design purposes.An assessment study of equations was conducted against the experimental data and original SCF database.The satisfaction of acceptance criteria proposed by the UK Department of Energy(UK DoE) was also checked.Results of parametric study showed that highly remarkable differences exist between the SCF values in a multi-planar DKT-joint and the corresponding SCFs in an equivalent uni-planar KT-joint having the same geometrical properties.It can be clearly concluded from this observation that using the equations proposed for uni-planar KT-connections to compute the SCFs in multi-planar DKT-joints will lead to either considerably under-predicting or over-predicting results.Hence,it is necessary to develop SCF formulae specially designed for multi-planar DKT-joints.Good results of equation assessment according to UK DoE acceptance criteria,high values of correlation coefficients,and the satisfactory agreement between the predictions of the proposed equations and the experimental data guarantee the accuracy of the equations.Therefore,the developed equations can be reliably used for fatigue design of offshore structures.     

带有挡板的注液舱室地震响应分析（英文）

In thispaper, the effects of a rigid baffle on the seismic response of liquid in a rigid cylindrical tank are evaluated. A baffle is an annular plate which supplies a kind of passive control on the effects of ground excitation. The contained liquid is assumed incompressible, inviscid and has irrotational motion. To estimate the seismic response, the method of superposition of modes has been applied. To analyze the rigid tank response, Laplace's equation is considered as the governing equation of the fluid domain, in both time and frequency domains. The boundary element method(BEM) is employed to evaluate the natural modes of liquid in a cylindrical tank. To gain this goal, the fluid domain is divided into two upper and lower parts partitioned by the baffle. Linearized kinematic and dynamic boundary conditions of the free surface of the contained liquid have been considered.     

Women’s mode and trip structure choices in daily activity-travel: a developing country perspective

ABSTRACT

In this paper, we analyze the travel patterns of Iranian women, where typical patriarchal views and specific social and cultural norms may differ from the patterns of those in western societies. In addition to inherent psycho-physical gender differences, women in Iran can face special constraints forcing them not to be involved in all activity-travel patterns that people in developed countries usually undertake. We pay special attention to the role of marital and employment status on women’s activity-travel patterns. To this end, we develop a joint mode and daily activity pattern (DAP) discrete choice model, which is a two-level mixed nested Logit. The upper nest of the proposed model embodies women’s DAP choices, and the lower nest belongs to the mode choices. In this paper, we try to show how different factors in a patriarchal Muslim society like Iran affect or restrict women’s type and structure of activity-travel patterns.     

A multiobjective land development optimization model: the case of New Castle County,Delaware

This paper develops a multiobjective optimization model to consider transportation impacts of the future development of land. The output of the model is the best location and type of land use that has minimal negative transportation effects and uses the maximum available public transportation infrastructure. It provides tools for both planners and transportation engineers and enables them to consider different scenarios of possible policies and land development. Since multiple objectives and their nonlinear structures are considered, the model is solved using mixed integer nonlinear programming. The final results are shown in both tabular and graphical format. The effectiveness of the model is applied to the northern part of New Castle County, Delaware. The results show that the model successfully finds the best locations for both residential and commercial land uses in order to meet several criteria discussed in the paper.     

A comprehensive study on the stability analysis of vehicle dynamics with pure/combined-slip tyre models

In this paper, a vehicle's lateral dynamic model is developed based on the pure and the combined-slip LuGre tyre models. Conventional vehicle's lateral dynamic methods derive handling models utilising linear tyres and pure-slip assumptions. The current article proposes a general lateral dynamic model, which takes the linear and nonlinear behaviours of the tyre into account using the pure and combined-slip assumptions separately. The developed methodology also incorporates various normal loads at each corner and provides a proper tyre–vehicle platform for control and estimation applications. Steady-state and transient LuGre models are also used in the model development and their responses are compared in different driving scenarios. Considering the fact that the vehicle dynamics is time-varying, the stability of the suggested time-varying model is investigated using an affine quadratic stability approach, and a novel approach to define the critical longitudinal speed is suggested and compared with that of conventional lateral stability methods. Simulations have been conducted and the results are used to validate the proposed method.     

A parametric study on water-entry of a twin wedge by boundary element method

High speed catamarans are used for pleasure, racing as well as passenger transportations. Optimal design of these crafts requires knowledge of sea loads exerted on their structures. The total load may be estimated by integration of loads exerted on a series of two-dimensional sections along the hull. In order to access the cross-sectional loads, the problem may be simplified to solve the water-entry problem of a twin hull. In this paper, water-entry problem of a twin wedge at constant vertical water-entry speed is studied. The problem is solved in the framework of potential theory using boundary element method where gravity effect on the flow is neglected. A simplified model based on Wagner theory is employed. Free surface elevation and pressure distribution on the body in different deadrise angles have been evaluated. A parametric study has been done to investigate effects of deadrise angle, distance between demi-hulls and free surface elevation on maximum pressure coefficient. Finally, a regression formula for maximum pressure coefficient has been proposed. Results of parametric study reveal that as time advances the interaction between two demi-hull gets more severe, besides the interaction effect on pressure coefficient is nonlinear.     

Risk-based maintenance and rehabilitation decisions for transportation infrastructure networks

A method for determining optimal risk-based maintenance and rehabilitation (M&R) policies for transportation infrastructure is presented. The proposed policies guarantee a certain performance level across the network under a predefined level of risk. The long-term model is formulated in the Markov Decision Process framework with risk-averse actions and transitional probabilities describing the uncertainty in the deterioration process. The well known Conditional Value at Risk (CVaR) is used as the measure of risk. The steady-state risk-averse M&R policies are modeled assuming no budget restriction. To address the short-term resource allocation problem, two linear programming models are presented to generate network-level polices with different objectives. While the proposed methodology is general and can be used with any performance indicator, pavement roughness is used for numerical studies and an analytical expression for computing CVaR is derived.