TRAXX——提高铁路运输竞争能力的集成式机车平台

庞巴迪公司交通运输部按照运用部门和市场准入的要求,根据在交流机车和多电流制机车上证实是可靠的系统开发了新一代机车平台TRAXX.该机车平台采用了新的总体布置设计,使交流、直流、多电流制和内燃机车有相同的总体布置,实现了机车历史上所有各种机车的通用性,运用部门也得到了此前不能实现的最佳协作和高度的灵活性.     

Fatigue life prediction of welded stiffened 350WT steel plates

The propagation of fatigue cracks under constant amplitude cyclic loading was studied in welded stiffened steel plates. The residual stresses in the stiffened plates were measured using the neutron diffraction strain-scanning technique. A finite element model of the stiffened plate was constructed to simulate the residual stresses by an uncoupled thermal and thermo-mechanical analysis. Both the finite element model and the neutron diffraction measurements indicated that in general the residual stresses were tensile near the welded stiffeners and compressive between the stiffeners and ahead of the starter notch tip. Fatigue testing indicated that the fatigue crack growth rates of the stiffened plates were in general lower than that of a corresponding unstiffened plate, especially near the notch tip where compressive residual stresses existed. Both the finite element method and Green's function predicted the fatigue crack growth rates with reasonable accuracy.     

Environmental risk evaluation criteria

This paper describes an approach to incorporating environmental risk evaluation criteria within IMO’s guidelines for Formal Safety Assessment (FSA). Such criteria are currently absent from FSA, and the discussion to include them has just started. Said criteria are relevant for evaluating on a cost-benefit basis Risk Control Options (RCOs) for reducing oil spill pollution risk. Oil pollution may comefrom any ship, including bunker spills from non-tank vessels. RCOs are not necessarily ship-based, and may include vessel traffic management information systems (VTMIS) and other options. The proposed approach may be useful in extending FSA to cover environmental risk evaluation criteria and combines such criteria with criteria already in use in FSA. It can also readily be extended to environmental consequences other than oil pollution. Recent IMO developments on this matter are also reported.     

Hoop stress approximation in offshore design codes

For a circular cylindrical vessel with an elastic material, Lame equations can accurately predict hoop stress variation within the vessel wall. However, because of the complexity involved in Lame formulations they are seldom used in design. In this paper, Lame equations are reproduced in terms of vessel outer and material cross-sectional areas and presented in a very simple format that enables hoop stress calculation without use of any approximation. Lame equations are also presented in terms of diameter-to-wall-thickness ratios in order to perform parametric studies. For a practical range of diameter-to-wall-thickness ratios the Lame hoop stress predictions are compared with approximate solutions of a selected design codes. For a range of loading conditions, comparison of results shows that a number of design codes overestimate the hoop stress. In contrast, a selection of offshore codes is shown to underestimate the hoop stress and, for a certain loading condition some codes ignore the hoop stress effect completely. The present paper also shows how the hoop stress approximation may lead to onerous results when the true wall axial stress is derived based on design code hoop stress formulations. It is concluded that what makes the present hoop stress formulations so important in design is their ability to interpret the mechanics of behavior that Lame equations strived to reveal.     

GPS-based speed collection method for road traffic noise mapping

One of the most difficult and expensive tasks in making noise pollution maps is the collection and processing of the data needed to create acoustic models. In the case of road traffic noise maps, obtaining speed data for light and heavy vehicles a problem that has usually been avoided by using a road’s speed limit or by making assumptions based on experience from similar road types. Here global positioning systems-based techniques are applied for acquiring vehicle speed data and adapted to fulfill the requirements of noise prediction models.     

Designing a non-linear tracking controller for vehicle active suspension systems using an optimization process

In this paper, a new non-linear tracking controller for vehicle active suspension systems is analytically designed using an optimization process. The proposed scheme employs a realistic non-linear quarter-car model, which is composed of a hardening spring and a quadratic damping force. The control input is the external active suspension force and is determined by minimizing a performance index defined as a weighted combination of conflicting objectives, namely ride quality, handling performance and control energy. A linear skyhook model with standard parameters is used as the reference model to be tracked by the controller. The robustness of the proposed controller in the presence of modeling uncertainties is investigated. The performed analysis and the simulation results indicate that both vehicle ride comfort and handling performance can be improved using the minimum external force when the proposed non-linear controller is engaged with the model. Meanwhile, a compromise between different objectives and control energy can easily be made by regulating their respective weighting factors, which are the free parameters of the control law.     

Public perceptions of toll roads: A survey of the Texas perspective

Like many U.S. states, Texas is experiencing shortfalls in transportation funding, along with growing needs for system improvements. Accordingly, the Texas Department of Transportation (TxDOT) is turning to tolling to bridge the funding gap. To assist planning efforts and effectively direct public information, a telephone survey of 2111 Texans was undertaken statewide to gauge public opinion on tolling issues.Some issues yielded a definite consensus among survey respondents. Over 70% agreed on attending to existing roads first, keeping existing roads toll-free, reducing tolls after construction, using revenues within the same region, charging higher tolls for trucks, not imposing SOV tolls, and maintaining the same toll rates during rush-hours. Some opinions varied by region. Austinites were more likely to support additional transportation spending, while residents of the Lower Rio Grande Valley were less supportive of raising the gas tax and of public/private partnerships. Opinions also varied with survey design. In eight places in the survey, optional text was provided or question order was modified to intentionally influence response. For two questions, support for tolling was decreased when information on personal transportation costs and higher gas tax rates in other states was offered. Ordered probit and binomial and multinomial logit models were estimated to assess the impact of demographic and travel characteristics on respondent opinions, and results for key issues are presented here. Opinions across demographic groups also were examined. The survey was successful at measuring opinions on several key tolling issues and should prove a useful tool for transportation planners and policymakers.     

Scientific requirements for an abyssal benthic laboratory

For over thirty years man has studied “outer space” and installed satellites which watch the surface of the Earth. The great depths of the world ocean are, however, practically unknown and there is an urgent need to put abyssal benthic laboratories into “inner space” in order to study basic phenomena of interest to marine science and climatology as well as man's impact on the oceans.In view of the numerous problems related to global change, as a first step emphasis should first be on the role of the oceans and their inherent processes, which are the focus of such international programmes as the World Ocean Circulation Experiment (WOCE) and the Joint Global Ocean Flux Study (JGOFS). Multi-disciplinary registration of key events at selected key sites investigating the variability in time and space are of the utmost importance. The same methods and techniques must be used for the study of human impacts on the deep oceans caused by mining of metalliferous resources and by waste disposal as well as in basic studies. However, the investigation of the inner space of our planet has certain requirements. As long-term and large-scale investigations become more and more important, development of automized systems, largely independent from research vessels will be required. This will demand high capacities of energy for all technical functions as well as high storage capacities for data and samples. As a consequence the needs for two different—although overlapping—functional approaches are defined for future deep-sea deployments.(A) A system for long-term registration of the natural variability and long-term monitoring of human impacts: (B) A system for short-term observations and short-time experimentations. This report summarizes their technological demands. The envisioned interdisciplinary technology should deliver information on physical, biological and geochemical processes and their variabilities in the deep oceans. The prospected systems need to have the ability for real time video observation, data transfer and experimental manipulation, as well as sensing and sampling facilities with large storage capacities for long-term deployments.Prospective costs of the described multipurpose abyssal benthic laboratory will presumably exceed the funds for deep-sea research of a single country. A joint European effort could solve this problem and help to manifest a leading role for European marine science in international deep-sea and global change research.     

变压器保护方法的发展

介绍了用于电力变压器保护的数字继电器的发展及其应用技术和原理,简述了变压器保护的传统方法,重点介绍了人工神经网络(ANN)和模糊逻辑概念等最新技术及其涉及的技术成果.     

Inertial waves in the Ibiza channel

Currentmeter data taken in the Ibiza Channel show the almost permanent presence of near-inertial motions below the mixed layer. They correspond to downwards progressing waves with a vertical group velocity of some m/day. The presence of the Balearic Front sensibly affects the propagation of these inertial waves. Although situations exist in which the passage of atmospheric fronts along the Channel is clearly the generating force of these near-inertial motions we find others in which the energy density in mid-depths is higher than in any other depth. These last situations are closely related to the arrival to the Channel of some of the different water masses which flow around there. A clear correspondence between the presence of relatively strong inertial waves and a noticeable vertical shear of the subinertial flow, evidenced by an averaged Richardson number, is also observed. In some circumstances, the vertical shear of the whole flow (inertial plus subinertial) is higher than the stability limit, that is, Ri < 0.25, favoring the braking of the internal waves. This could be a plausible cause of their decay and a reason to explain why they do not penetrate further than certain depths.