Discretionary activity location choice: in-home or out-of-home?

This paper examines the location choice associated with discretionary activities (in-home vs. out-of-home). These substitution patterns are important in terms of travel demand as in-home activities do not necessitate travel while out-of-home activities incur travel. Mixed logit models are estimated using an activity dataset (2003 CHASE data) to analyze the factors associated with this choice at the individual activity-level. Results suggest that the attributes of an activity significantly contribute to understanding the likelihood of engaging in out-of-home activities. Activity type interaction terms reveal the varying influence that socio-demographics, activity attributes and travel have over four different activity types modeled. The results reveal that the location choice (in-home vs. out-of-home) is sensitive to travel characteristics. As the travel time and cost increases, an individual is less likely to engage in an activity out-of-home. Compared to passive and social activities, the location of active activities is more sensitive to changes in travel attributes.     

Minimum Efficient Scale (MES) and preferred scale of container terminals

The decision on the scale of a port terminal affects the terminal’s managerial, operational and competitive position in all the phases of its life. It also affects competition structures in the port in which the terminal is operating, and has a potential impact on other terminals. Port authorities and terminal operators need to know the scale of the terminal when engaging in concession agreements. In economic theory the scale of a plant/firm is typically defined in relation to the Minimum Efficient Scale (MES), the long-run output where the internal economies of scale are fully exploited. However, there are a number of theoretical and empirical indications that in ports the scale of a terminal is commonly guided by a combination of the MES and other determining factors. The “preferred” scale is the result of a complex interaction between the MES, the port governance framework and objectives, the market size and structure, technological change and operational considerations, physical and geographical limitations, and the business patterns of shipping lines. This study analyses the factors resulting in a preferred container terminal scale that in most of the times is different from the MES. The analysis of the technical, market-related and governance-related factors is supported by theoretical and empirical insights that illustrate the presence of a range of actual ”preferred” scales of terminal concessions that usually are different, below or above, MES.     

Estimation of road profile variability from measured vehicle responses

When assessing the statistical variability of fatigue loads acting throughout the life of a vehicle, the question of the variability of road roughness naturally arises, as both quantities are strongly related. For car manufacturers, gathering information on the environment in which vehicles evolve is a long and costly but necessary process to adapt their products to durability requirements. In the present paper, a data processing algorithm is proposed in order to estimate the road profiles covered by a given vehicle, from the dynamic responses measured on this vehicle. The algorithm based on Kalman filtering theory aims at solving a so-called inverse problem, in a stochastic framework. It is validated using experimental data obtained from simulations and real measurements. The proposed method is subsequently applied to extract valuable statistical information on road roughness from an existing load characterisation campaign carried out by Renault within one of its markets.     

Modeling multi-unit vehicle dynamics for low-speed path-following assessment off-highway

This paper proposes a non-linear dynamics model for articulated vehicles. This model is able to capture common low-speed behaviours of any articulated vehicles off-highway, such as operating for a corner or roundabout on a cambered or slippery surface. It can be used to assess the low-speed manoeuvrability of articulated vehicles under such manoeuvres and conditions. The vehicle model was validated by comparing its path tracking performance to that of the field tests.     

The impact of job assignment rules for straddle carriers on the throughput of container terminals

Straddle carriers represent a critical resource in the handling of containers within a container terminal. It is essential that they are deployed in an as efficient manner as possible. The research presented in this paper is motivated by the need to critically evaluate job assignment rules for straddle carriers that operate in a multiple straddle environment. This is achieved by developing a discrete event simulation model using industrial simulation software to model a container terminal located in Melbourne, Australia. The model accounts for variables such as the number of straddle carriers needed, the speed of straddle carriers, the arrival rate of trucks, and the job assignment rule. A principal finding of the study is that increasing the number of straddles in the present set‐up from 6 to 7 has a negligible effect on daily throughput. However, an increase in the number of straddles to 7 is expected to have a profound effect on reducing the average waiting time of trucks within the terminal from over 16 minutes to under 9 minutes, a decrease of 46.5%. However, a further increase in the number of straddles results in no further increase in daily throughput. It was observed that the throughput of the terminal is very sensitive to the speeds at which straddles travel. The management of the terminal has proposed a new heuristic job assignment rule for straddles, because the present rule does not assign the jobs to straddles closest to the truck requesting to load or unload a container. As a result a new heuristic job assignment rule was tested. The simulation results revealed that both the old and new rules performed equally well using performance indicators such as average container flow time, daily throughput, average waiting time of jobs, number of jobs in the queue, and straddle utilisation. Therefore, the new rule will not improve these performance measures if implemented     

软开关变流器的稳态分析(一)

讨论软开关变流器的稳态分析.由于分别由软开关变流器的Lr-Cr单元和大的L-C滤波器单元决定的快、慢固有频率的共存,通过启动瞬态仿真程序寻找软开关变流器的稳态解可能会造成繁琐的计算和收敛失败.由于采用了基于暂态分析的换相检测技术和基于补偿原理的换相分析技术,文章所提出的数值法显示了高可靠性和快速收敛性.对两个直流变换器、一台逆变器和一台功率因数补偿装置作的稳态分析,突出显示了仿真算法的良好性能.     

Exact and simplified estimations for elastic buckling pressures of structural pipe-in-pipe cross sections under external hydrostatic pressure

Structural pipe-in-pipe cross sections have significant potential for application in offshore oil and gas production systems because they combine thermal insulation performance with structural strength and self weight in an integrated way. Such cross sections comprise inner and outer thin-walled pipes with the annulus between them fully filled by a selectable filler material to impart an appropriate combination of properties. Structural pipe-in-pipe cross sections can exhibit several different collapse mechanisms, and the basis of the preferential occurrence of one over the others is of interest. This article presents an exact analysis for predicting the elastic buckling behaviours of a structural pipe-in-pipe cross section when subjected to external hydrostatic pressure. Simplified approximations are also investigated for elastic buckling pressure and mode when the outer pipe and its contact with the filler material is considered as a pipe on an elastic foundation. Results are presented to show the variation of elastic buckling pressure with the relative elastic modulus of the filler and pipe materials, the filler thickness, and the thicknesses of the inner and outer pipes. Case studies based on realistic application scenarios are used to show that the simplified approximations are sufficiently accurate for practical structural design purposes.     

Second-order sum-frequency wave diffraction by a truncated surface-piercing cylinder in bichromatic waves

This work considers the second-order sum-frequency diffraction problem for a stationary truncated surface-piercing circular cylinder in bichromatic waves. The solution method was based on a semianalytical formulation of the second-order sum-frequency diffraction potential. The boundary conditions were properly satisfied by introducing the “locked” and the “free” wave components of the nonlinear velocity potential. The method was validated by comparing the calculated results with numerical data previously reported by other authors. Particular attention was paid to the second-order sum-frequency heave forces and the change in the wave run-up configuration due to the existence of the lower fluid domain underneath the truncated cylinder.     

The ISM Code and the ISPS Code: A critical legal analysis of two SOLAS regimes

Within the comprehensive body of law encompassed by the International Convention on Safety of Life at Sea, 1974 (SOLAS), there are two regimes that are topical and outstanding in the current maritime milieu. These are the international safety management and the international ship and port facility regimes, both characterized by two codes serving as the centre of gravity of each, namely, the ISM Code and the ISPS Code, respectively. In this article the concept of the code as a legal instrument is perused following which a critical legal analysis is carried out of the two above-mentioned Codes, including their backgrounds, the evolutionary process culminating into the regimes and their interrelationships. Several anomalies and inadequacies in the two regimes are identified but in the final analysis it is concluded that both instruments are salutary additions to the body of convention law generated by the International Maritime Organization (IMO). They will undoubtedly influence the continuing development of international law in the field of maritime safety and security.